Study of subsurface initiation mechanism for white etching crack formation
Source abstract
Abstract
The present paper describes a novel way to detect early stages in the gradual transformation of SAE 52100 bearing steel material to white etching cracks (WEC). The underlying transformation is recorded and investigated by a complementary use of Barkhausen noise measurements, ultrasonic measurements and scanning electron microscopy. While ultrasonic measurements can only be used to detect cracks in a failed component, the recently improved Barkhausen noise measurement technique can be used to detect possible early stages of microstructural transformation. A cross section from a region without ultrasonic signal but with a Barkhausen signal has been investigated by the use of scanning electron microscopes in order to reveal possible pre-stages of WEC formation. These findings support that WEC are locally initiated in subsurface regions. Within those modified regions, carbides start to dissolve in consequence of deformation accumulation, which has been identified as an early state of WEA microstructure formation. This paper is part of a Themed Issue on Recent developments in bearing steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Central Facility for Electron Microscopy, RWTH Aachen University, Ahornstr. 55, 52074 Aachen, Germany
Soeren Barteldes, QASS GmbH, Schöllinger Feld 28, 58300 Wetter, Germany
Schaeffler Technologies AG& Co. KG, Industriestrasse 1-3, 91074 Herzogenaurach, Germany
References (46)
Show source-provided references
1. 10.1179/026708311X1313595069925410.1179/026708311X13135950699254 ↗
2. 10.1016/j.scriptamat.2013.07.01710.1016/j.scriptamat.2013.07.017 ↗
3. Diederichs A. M. · Microsc Conf. · 2015
4. 10.1016/0043-1648(96)06990-610.1016/0043-1648(96)06990-6 ↗
5. 10.1080/10402004.2014.94293810.1080/10402004.2014.942938 ↗
6. 10.1016/j.scriptamat.2007.06.02410.1016/j.scriptamat.2007.06.024 ↗
7. 10.3139/147.11024610.3139/147.110246 ↗
8. 10.1007/BF0265659210.1007/BF02656592 ↗
9. 10.1016/j.ijfatigue.2011.12.00610.1016/j.ijfatigue.2011.12.006 ↗
10. Gegner J. · Tribol. Schmierungstechnik · 2011 · 58 · 10
11. 10.1177/135065011452536310.1177/1350650114525363 ↗
12. Richardson A. D. · Tribol. Lubr. Tech. · 2014 · 10 · 24
13. ‘Rolling bearings – methods for calculating the modified reference rating life for universally loaded bearings’, ISO/TS 16281, 2008.
14. 10.1088/0022-3727/35/12/10110.1088/0022-3727/35/12/101 ↗
15. Wang L. · Cond. Monitor. · 2007 · 248 · 5
16. 10.1007/s11249-015-0564-810.1007/s11249-015-0564-8 ↗
17. Troiano A. R. · Trans. ASM · 1960 · 53 · 54
18. Oriani R. · 1985
19. 10.1007/978-94-009-3665-2_2910.1007/978-94-009-3665-2_29 ↗
20. 10.1007/BF0264204810.1007/BF02642048 ↗
21. Gegner J. · Tribol. Schmierungstechnik · 2011 · 58 · 10
22. Dietzel Turnbull W. · Hydrogen Trans. Crack. Met. · 1994 · 77
23. Juilfs G. G. ‘Das Diffusionsverhalten von Wasserstoff in einem niedrig legierten Stahl unter Berücksichtigung des Verformungsgrades und der Deckschichtbildung in alkalischen Medien‘, PhD thesis, 2000, TU Hamburg-Harburg, Hamburg, Germany.
24. 10.1002/maco.1985036100210.1002/maco.19850361002 ↗
25. 10.2355/isijinternational.43.47510.2355/isijinternational.43.475 ↗
26. 10.1080/1478643630820731810.1080/14786436308207318 ↗
27. 10.2474/trol.6.12310.2474/trol.6.123 ↗
28. 10.1177/135065011452245210.1177/1350650114522452 ↗
29. Hiraoka K. · Jpn. J. Tribol. · 2007 · 52 · 673
30. Surborg H. ‘Einfluss von Grundölen und Additiven auf die Bildung von WEC in Wälzlagern’, PhD thesis, Otto-von-Guericke-University, Magdeburg, Germany, 2014.
31. Österlund R. · Scand. J. Metallur. · 1982 · 11 · 23
32. Volk R. · 2005
33. 10.2320/matertrans.44.218410.2320/matertrans.44.2184 ↗
34. 10.1016/j.cap.2003.11.03510.1016/j.cap.2003.11.035 ↗
35. 10.1063/1.36208510.1063/1.362085 ↗
36. Cikalova U. · AIP Conf. Proc. · 2013 · 1581
37. Cikalova U. ‘Auto-calibration principles for two-dimensional residual stress measurements by Barkhausen noise technique’, Chimenti, D. E; American Society for Nondestructive Testing -ASNT- Columbus/Ohio: 40th Annual Review of Progress in Quantitative Nondestructive Evaluation, 2013, 33B, (Pt.1), 1243–1247. ISBN: 978–0-7354-1211-810.1063/1.4864963 ↗
38. Cikalova U. ‘Charakterisierung der Ermüdungsschädigung durch Barkhausenrauschen und Poisson-Zahl’, Diploma thesis, Dresden, Germany, 2005.
39. 10.3139/120.11029910.3139/120.110299 ↗
40. Schreiber J. · 6th International Conference on Low Cycle Fatigue · 2008 · 655
41. 10.1108/0036879121121865010.1108/00368791211218650 ↗
42. 10.1016/j.commatsci.2012.09.02210.1016/j.commatsci.2012.09.022 ↗
43. Zapffe C. A. · Trans. AIME · 1941 · 145 · 225
44. 10.1179/1743284715Y.000000003610.1179/1743284715Y.0000000036 ↗
45. Griffith A. A. · Trans. ASM · 1968 · 61 · 855
46. Troiano A. R. · Trans. Met. Soc. · 1959 · 215 · 1048