journal article·2010-07Open access

Microstructural analysis of creep exposed IN617 alloy

R. Krishna, S. V. Hainsworth, H. V. Atkinson, A. Strang

Materials Science and Technology· Volume 26· Issue 7

Abstract

Ni base alloys such as IN617 are one of the preferred choices for steam turbine components used by fossil fuelled power generation plants. IN617 is a solid solution strengthened Ni based superalloy containing ∼23%Cr, 12%Co and 9%Mo with low content of precipitation strengthening elements Al, Ti and Nb. In the ‘as received’ (solution annealed condition), the microstructure consists of primary carbides (M23C6) and occasional TiN particles dispersed in a single phase austenitic matrix. Owing to high temperature exposure and the creep deformation processes that occur in service, evolution of the microstructure occurs. This results in secondary precipitation and precipitate coarsening, both on grain boundaries and intragranularly in areas of high dislocation density. The influence of creep deformation on the solution treated IN617 alloy at an operating condition of 650 ∼C/574 h, with emphasis on the morphology and distribution of carbide/nitride precipitation is discussed. The applied stress was at an intermediate level.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of EngineeringUniversity of Leicester, University Road, Leicester LE1 7RH, UK

Department of EngineeringUniversity of Leicester, University Road, Leicester LE1 7RH, UK;, Email: svh2@le.ac.uk

References (23)

Show source-provided references
1. Viswanathan R., Hanry J. F., Tanzosh J., Stanko G., and Schlingledecker J.: Proc. Conf. on ‘Creep and fracture at high temperature components’, (ed. I. A. Shibli et al), 59-74; 2005, Lancaster, PA, DEStech.
2. 10.1361/1059949052403910.1361/10599490524039 ↗
3. Zhao S., Xie X., Smith G. D., and Patel S. J.: Mater. ScL Eng. A, 2003; A355,96–105.10.1016/S0921-5093(03)00051-0 ↗
4. Tancret F., and Bhadeshia H. K. D. H.: Proc. 6th Int. Charles Parsons Turbine Conf. on ‘Engineering issues in turbine machin-ery, power plant and renewables’, (ed.Strang A. et al), 525-535; 2003, London, Institute of Materials.
5. 10.1007/s11661-008-9618-y10.1007/s11661-008-9618-y ↗
6. Reed R. C.: Proc. 7th Int. Charles Parsons Turbine Conf. on ‘Power generation in an era of climate change’, (ed.Strang A. et al), 89-97; 2007, London, Institute of Materials.
7. Meetham G. W.: in ‘High temperature alloys for gas turbines and other applications’, (ed.Betz W. et al), 1-18; 1986, Dordrecht, D. Reidel Publishing Company.
8. 10.1007/s11661-999-0151-410.1007/s11661-999-0151-4 ↗
9. 10.1016/j.engfailanal.2004.09.01010.1016/j.engfailanal.2004.09.010 ↗
10. Ren W., and Swindeman R.: J. Press. Vessel Technol, 2009,131, (2), 024002(1)-024002(15).10.1115/1.3121522 ↗
11. Hosier J. C. · Met. Eng. Q · 1972 · 12 · 51
12. 10.1007/BF0264387910.1007/BF02643879 ↗
13. 10.1007/BF0265982810.1007/BF02659828 ↗
14. Kihara S. · A · 1980 · 11 · 1019
15. 10.1080/1042691950893508010.1080/10426919508935080 ↗
16. 10.1179/02670839279016981210.1179/026708392790169812 ↗
17. Davis J. R. (ed.): ”, in ‘ASM specialty handbook: heat resistant materials’, 331; 1999, Materials Park, OH, ASM International.
18. ‘Standard test methods for determining average grain size’, E 112, ASTM International, West Conshohocken, PA, USA 1996.
19. PeakFit® · 4.12
20. 10.1016/S1359-6462(02)00456-610.1016/S1359-6462(02)00456-6 ↗
21. Krishna R., Hainsworth S. V., Gill S. P. A., Strang A., and Atkinson H. V.: Proc. 2nd Int. ECCC Conf. on ‘Creep and fracture in high temperature components: design and life assessment’, (ed.Shibli I. A., and Holdsworth S. R.), 764–776; 2009, Zurich, ECCC.
22. 10.1016/j.engfailanal.2004.10.00210.1016/j.engfailanal.2004.10.002 ↗
23. Wusatowska-Sarnek A. M., Blackburn M. J., and Aindow M.: Mater. ScL Eng. A, 2003, A360, (1-2),390–395.10.1016/S0921-5093(03)00498-2 ↗