journal article·2008-02

Influence of post-weld heat treatments on microstructure and mechanical properties of AISI 431 martensitic stainless steel friction welds

A. Rajasekhar, G. M. Reddy, T. Mohandas, V. S. R. Murti

Materials Science and Technology· Volume 24· Issue 2
Publisher page

Abstract

The relative effects of different post-weld heat treatments (PWHTs) on microstructure and mechanical properties of friction welded martensitic stainless steel type AISI 431 were studied. The weld microstructure consists of acicular martensite in equiaxed prior austenite grains and with heat treatment, the martensitic microstructure experiences coarsening. It was observed that retained austenite content decreases with an increase in the PWHT tempering temperature. The tensile properties of welds under different PWHTs were comparable to those of parent metal in the respective treatments. Welds exhibited higher notch tensile strengths than the parent metal in the respective heat treatment condition. Double tempering (670°C + 600°C) led to maximum reduction in hardness. Welds exhibited poor impact toughness in the as welded condition. The improvement in impact toughness was found satisfactory in welds subjected to double tempering, although did not match to the level of the parent metal at respective conditions. The mechanism and reasons for the observed behaviour have been discussed, correlating the microstructure, fracture features and mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Brickner K. G. · Met. Eng. Q · 1968 · 8 · 1
2. Pickerring F. B. · Met. Re · 1976 · 227
3. Kreischer C. G.: Weld. 1, 1961,40, (11), 489s-496s.10.1016/0042-207X(61)90214-7 ↗
4. 10.1016/S1044-5803(00)00099-110.1016/S1044-5803(00)00099-1 ↗
5. Castro R., and de Cadenet J. J. ‘Welding metallurgy of stainless and heat resisting steels’, 56-57; 1974, Cambridge, Cambridge University.
6. Akselsen O. M., Rorvik G., Kvaale P. E., and Vander C. E. J. K.: Weld 1, May 2004, 83, 161s-167s.
7. Dawes C. J. · Met. Constr · 1975 · 7 · 512
8. Black R. A. · Sept · 1982 · 10 · 7
9. Buts B. D. · Weld, May · 1979 · 32 · 1820
10. Okita K. · Trans. Jpn Weld Soc · 1982 · 13 · 83
11. Cullity B. D. ‘Elements of X-ray diffraction’: 1978, Reading, Addison-Wesley.
12. Siuzalec A. · J. Mech. Sc · 1990 · 46710.1016/0020-7403(90)90153-A ↗
13. 10.1179/mst.1991.7.11.105710.1179/mst.1991.7.11.1057 ↗
14. Andrews K. W. · J. Iron Steel Inst · 1965 · 203 · 721
15. Speich G. R. · Mater. Trans. A · 1972 · 3 · 1043
16. Irvine K. J. · J. Iron Steel Inst · 1960 · 195 · 386
17. Brownrigg A.: Proc. 16th Int. Conf. on ‘Heat treatment 76’, Stratford-upon-Avon, UK, May 1976, The Metals Society,86–93.
18. Niederay H. J. ‘Stainless steel castings’, ASTM STP 756, ASTM, Philadelphia, PA, USA, 1982, 382.10.1520/STP28452S ↗
19. Reddy G. M., and Mohandas T.: Proc. Symp. on ‘Joining of materials’, Tiruchirappalli, India, July 2004, Welding Research Institute, WMA2.
20. Reddy G. M., and Mohandas T.: Proc. Int. Welding Symp., Hyderabad, India, February 2005, Indian Welding Society, WP16
21. Reddy G. M., and Mohandas T.: Proc. Int. Welding Symp., Hyderabad, India, February 2005, Indian Welding Society, WM 01.
22. Mohandas T., Kulkarni M. S., and Reddy G. M. ‘Welding studies on a super-duplex stainless steel’, DMRL TR 2003 338, Defence Metallurgical Research Laboratory, Hyderabad, India, 2003,1–34.
23. 10.2472/jsms.31.26510.2472/jsms.31.265 ↗
24. 10.2355/tetsutohagane1955.69.1_14510.2355/tetsutohagane1955.69.1_145 ↗
25. 10.1179/mst.1991.7.5.44110.1179/mst.1991.7.5.441 ↗
26. Ninomi M., Inagahi I., and Kobayashi T.: Mater. Sci. Technol, Sept. 1988, 4, (7-12),803–810.
27. 10.1179/13621710322501092510.1179/136217103225010925 ↗
28. 10.1016/0025-5416(88)90238-810.1016/0025-5416(88)90238-8 ↗
29. 10.1016/S0921-5093(98)00697-210.1016/S0921-5093(98)00697-2 ↗