journal article·2019-11

Analysis of medium manganese steel through cold-rolling and intercritical annealing or warm-rolling

Aline Silva Magalhães, Carlos Eduardo dos Santos, Aline Oliveira Vasconcelos Ferreira, Davi Silva Alves, Dagoberto Brandão Santos

Materials Science and Technology· Volume 35· Issue 17
Publisher page

Abstract

Medium manganese steel is typically fabricated from hot-rolling followed by cold-rolling and intercritical annealing processes. However, a singular process, warm-rolling, is an appealing prospect. The microstructure, mechanical properties and texture of a 8 wt-% Mn–0.08 wt-% C steel was investigated by cold-rolling followed by intercritical annealing or warm-rolling. The product from both processes exhibited a highly refined microstructure as well as a large volume fraction of austenite. However, a slightly larger volume fraction as well as a more heterogeneous austenite morphology resulted from the warm-rolling process, associated with a higher work-hardening rate. Microstructural analysis revealed intense α-fibre components due to a higher strain following the warm-rolling process as well as a considerably high-angle grain boundary number which was associated with dislocation accumulation. This paper is part of a Thematic Issue on Medium Manganese Steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Departamento de Engenharia de Materiais, Centro Federal de Educação Tecnológica de Minas Gerais – CEFETMG, Belo Horizonte, Brazil

Metallurgical and Materials Engineering Department, Universidade Federal de Minas Gerais – UFMG, Belo Horizonte, Brazil

Funding

Conselho Nacional de Desenvolvimento Científico e Tecnológico

References (56)

Show source-provided references
1. DeCooman BC. · 2016
2. 10.1016/S1006-706X(14)60086-810.1016/S1006-706X(14)60086-8 ↗
3. 10.1016/j.scriptamat.2013.02.01010.1016/j.scriptamat.2013.02.010 ↗
4. 10.1016/j.scriptamat.2016.07.01310.1016/j.scriptamat.2016.07.013 ↗
5. 10.1016/j.jmst.2017.06.01710.1016/j.jmst.2017.06.017 ↗
6. 10.1016/j.msea.2016.11.03610.1016/j.msea.2016.11.036 ↗
7. 10.1007/978-3-319-19165-210.1007/978-3-319-19165-2 ↗
8. 10.1080/02670836.2017.131220810.1080/02670836.2017.1312208 ↗
9. 10.1007/s11661-014-2710-610.1007/s11661-014-2710-6 ↗
10. 10.1007/s11661-016-3433-710.1007/s11661-016-3433-7 ↗
11. 10.1002/adem.20090006110.1002/adem.200900061 ↗
12. 10.1016/0378-3804(79)90002-010.1016/0378-3804(79)90002-0 ↗
13. 10.1590/S1516-1439200200030002010.1590/S1516-14392002000300020 ↗
14. 10.1016/S0921-5093(02)00519-110.1016/S0921-5093(02)00519-1 ↗
15. 10.1016/j.jallcom.2017.07.20310.1016/j.jallcom.2017.07.203 ↗
16. 10.2355/isijinternational.ISIJINT-2016-73310.2355/isijinternational.ISIJINT-2016-733 ↗
17. 10.1016/S1044-5803(02)00193-610.1016/S1044-5803(02)00193-6 ↗
18. 10.1179/1743284714Y.000000072210.1179/1743284714Y.0000000722 ↗
19. International Organization for Standardization (ISO) · Steel – conversion of elongation values – part 1: carbon and low alloy steels · 1984
20. Dieter GE. · 1988
21. 10.3390/ma712789110.3390/ma7127891 ↗
22. Humphreys FJ · 2005
23. 10.1016/j.msea.2008.07.03010.1016/j.msea.2008.07.030 ↗
24. 10.1007/s11661-017-3979-z10.1007/s11661-017-3979-z ↗
25. 10.1016/j.actamat.2016.09.04810.1016/j.actamat.2016.09.048 ↗
26. 10.2355/isijinternational.51.65110.2355/isijinternational.51.651 ↗
27. 10.1016/j.jallcom.2016.08.09310.1016/j.jallcom.2016.08.093 ↗
28. 10.1016/S1006-706X(17)30123-110.1016/S1006-706X(17)30123-1 ↗
29. 10.1007/s11661-017-3995-z10.1007/s11661-017-3995-z ↗
30. 10.1016/j.matlet.2016.03.09010.1016/j.matlet.2016.03.090 ↗
31. 10.1002/srin.20140057710.1002/srin.201400577 ↗
32. 10.2355/isijinternational.54.287510.2355/isijinternational.54.2875 ↗
33. 10.1016/j.msea.2016.12.11910.1016/j.msea.2016.12.119 ↗
34. 10.1016/j.actamat.2013.12.03810.1016/j.actamat.2013.12.038 ↗
35. 10.1016/j.matchar.2015.05.02610.1016/j.matchar.2015.05.026 ↗
36. 10.1007/s11661-011-0687-y10.1007/s11661-011-0687-y ↗
37. 10.1007/s11661-009-0124-710.1007/s11661-009-0124-7 ↗
38. 10.1016/j.msea.2011.11.00910.1016/j.msea.2011.11.009 ↗
39. 10.1016/j.msea.2016.07.05410.1016/j.msea.2016.07.054 ↗
40. 10.1007/s11661-012-1402-310.1007/s11661-012-1402-3 ↗
41. 10.1016/j.scriptamat.2013.02.02610.1016/j.scriptamat.2013.02.026 ↗
42. 10.1016/j.msea.2016.06.07810.1016/j.msea.2016.06.078 ↗
43. 10.1016/j.msea.2015.09.03210.1016/j.msea.2015.09.032 ↗
44. 10.1007/s11661-016-3502-y10.1007/s11661-016-3502-y ↗
45. Jonas JJ. Transformation textures associated with steel processing. Springer, 2009. Chapter 1, Microstructure and Texture in Steels; p. 3–17.10.1007/978-1-84882-454-6_1 ↗
46. 10.1179/09506609079032404610.1179/095066090790324046 ↗
47. 10.1016/j.actamat.2008.09.04010.1016/j.actamat.2008.09.040 ↗
48. 10.1016/S0966-9795(02)00167-X10.1016/S0966-9795(02)00167-X ↗
49. Watanabe T. · Mat For. · 1988 · 11 · 284
50. 10.1016/j.matdes.2004.09.01410.1016/j.matdes.2004.09.014 ↗
51. 10.1179/mst.1997.13.4.28910.1179/mst.1997.13.4.289 ↗
52. 10.1179/174328406X13094810.1179/174328406X130948 ↗
53. 10.1016/j.matlet.2007.04.11210.1016/j.matlet.2007.04.112 ↗
54. 10.1016/S1359-6454(97)00027-X10.1016/S1359-6454(97)00027-X ↗
55. 10.1016/j.scriptamat.2007.06.06410.1016/j.scriptamat.2007.06.064 ↗
56. 10.1016/j.matchar.2008.03.01810.1016/j.matchar.2008.03.018 ↗