journal article·2018-01

In situ heavy ion irradiation in ferritic/martensitic ODS steels at 500°C

Zhongwen Yao, Ken He Zhang, Zhangjian Zhou, Mark R. Daymond, Stephanie Jublot-Leclerc, Odile Kaitasov

Materials Science and Technology· Volume 34· Issue 1
Publisher page

Abstract

Three different ferritic/martensitic oxide dispersion-strengthened steels (9Cr, 12Cr and 16Cr) were irradiated using dual beam ions (Kr + and He + ), with in situ transmission electron microscope observation. Helium was found to be essential in cavity nucleation and growth. The 9Cr alloy presented the lowest formation of cavities among the three irradiated steels, which is attributed to the presence of significant amounts of martensite. During the irradiation of 16Cr alloy with dual beam ions, cavity segregation to grain boundaries was observed at a relatively low dose ∼1 dpa, whereas it occurred at ∼2 dpa in 9Cr and 12Cr alloys. Nano-sized Y–Ti–O particles were stable during the entire irradiation to ∼8 dpa. The lattice defects were characterised and mainly consist of [Formula: see text] interstitial loops.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Materials Engineering, Queen's University, Kingston, ON, Canada

School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, PR China

Centre de Spectrométrie Nucléaire et de Spectrométrie de Masse (CSNSM), Univ Paris-Sud, CNRS, Université Paris Saclay, Orsay, France

Funding

Natural Sciences and Engineering Research Council of Canada · NSERC-UNENE Industrial Research Chair in Nuclear Materials · National Magnetic Confinement Fusion Program of China

References (27)

Show source-provided references
1. Alamo A, Regle H, Pons G, Proceedings on the International Symposium on Mechanical Alloying. Materials Science Forum; 1991 May; Kyoto, Japan, 2nd ed. Vol. 88-90. Trans Tech Publications; 1992. p. 183.10.4028/www.scientific.net/MSF.88-90.183 ↗
2. 10.1016/0022-3115(93)90200-I10.1016/0022-3115(93)90200-I ↗
3. 10.1016/S0022-3115(98)00140-810.1016/S0022-3115(98)00140-8 ↗
4. 10.1016/S0022-3115(02)01193-510.1016/S0022-3115(02)01193-5 ↗
5. 10.1016/j.fusengdes.2013.04.00510.1016/j.fusengdes.2013.04.005 ↗
6. 10.1016/j.msea.2015.04.03710.1016/j.msea.2015.04.037 ↗
7. 10.1016/j.ijrmhm.2016.06.01210.1016/j.ijrmhm.2016.06.012 ↗
8. 10.1016/j.jnucmat.2014.08.04210.1016/j.jnucmat.2014.08.042 ↗
9. 10.1016/j.mechmat.2013.07.00610.1016/j.mechmat.2013.07.006 ↗
10. 10.1016/j.jnucmat.2015.09.01410.1016/j.jnucmat.2015.09.014 ↗
11. 10.1016/j.jnucmat.2007.03.14210.1016/j.jnucmat.2007.03.142 ↗
12. 10.1016/j.jnucmat.2007.03.16610.1016/j.jnucmat.2007.03.166 ↗
13. 10.1016/j.jnucmat.2007.04.05110.1016/j.jnucmat.2007.04.051 ↗
14. 10.1016/j.jnucmat.2007.03.14910.1016/j.jnucmat.2007.03.149 ↗
15. 10.1016/j.jnucmat.2007.03.14510.1016/j.jnucmat.2007.03.145 ↗
16. 10.1016/j.jnucmat.2007.11.00110.1016/j.jnucmat.2007.11.001 ↗
17. 10.1016/j.jnucmat.2010.07.00210.1016/j.jnucmat.2010.07.002 ↗
18. 10.1016/j.jnucmat.2010.12.25110.1016/j.jnucmat.2010.12.251 ↗
19. 10.1016/j.jnucmat.2011.12.00910.1016/j.jnucmat.2011.12.009 ↗
20. 10.1016/j.jnucmat.2014.06.02410.1016/j.jnucmat.2014.06.024 ↗
21. 10.1016/j.jnucmat.2016.07.02210.1016/j.jnucmat.2016.07.022 ↗
22. 10.1016/j.nimb.2010.02.09110.1016/j.nimb.2010.02.091 ↗
23. 10.1080/1478643090343098110.1080/14786430903430981 ↗
24. 10.1016/j.jnucmat.2009.02.00310.1016/j.jnucmat.2009.02.003 ↗
25. 10.1080/1478643080238046910.1080/14786430802380469 ↗
26. 10.1080/1478643080238047710.1080/14786430802380477 ↗
27. 10.1016/j.jnucmat.2012.03.01110.1016/j.jnucmat.2012.03.011 ↗