Effects of reheating temperature and time on microstructure and tensile properties of thixoforged AZ63 magnesium alloy
Source abstract
Abstract
The effects of two main processing parameters such as reheating temperature and reheating time on microstructure and tensile properties of thixoforged AZ63 magnesium alloy have been investigated. The results indicate that these two parameters all have large effects on the microstructure and tensile properties. However, in contrast, the effects of the reheating temperature on liquid fraction and liquid composition of semisolid ingot, and thus the subsequent solidification behaviour and plastic deformation during thixoforging, are larger than those of the reheating time. Therefore, the effects of the former parameter on the microstructure and tensile properties are relatively larger than those of the latter parameter. It is also just this reason that the fracture regime during tensile testing varies as the reheating temperature rises, while the regime always maintains transgranular mode with the variation of the reheating time. Stress concentration that results from the plastic deformation obviously affects the tensile properties, while the primary particle size or grain size only has small effect. The appropriate reheating technique is the heating for 60 min at 595°C when mould temperature is maintained at 350°C. The ultimate tensile strength and elongation of the resulting alloy are up to 310 MPa and 10·7 respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Gansu Advanced Nonferrous Metal Materials Lanzhou University of Technology, Lanzhou 730050, China
References (26)
Show source-provided references
1. 10.1007/s11837-008-0150-810.1007/s11837-008-0150-8 ↗
2. 10.1023/A:100868241514110.1023/A:1008682415141 ↗
3. 10.1179/09506600122500107610.1179/095066001225001076 ↗
4. 10.1179/026708310X1281599241801210.1179/026708310X12815992418012 ↗
5. 10.1016/S1359-6454(01)00015-510.1016/S1359-6454(01)00015-5 ↗
6. 10.1016/j.msea.2007.12.00210.1016/j.msea.2007.12.002 ↗
7. 10.1016/j.jallcom.2007.11.03010.1016/j.jallcom.2007.11.030 ↗
8. 10.1016/j.matchar.2007.07.01510.1016/j.matchar.2007.07.015 ↗
9. 10.1016/j.jallcom.2009.02.04410.1016/j.jallcom.2009.02.044 ↗
10. 10.1016/j.jallcom.2009.09.11210.1016/j.jallcom.2009.09.112 ↗
11. 10.1016/j.jallcom.2009.04.05910.1016/j.jallcom.2009.04.059 ↗
12. 10.1016/j.matdes.2009.10.05610.1016/j.matdes.2009.10.056 ↗
13. Kazakov A.A. · Adv. Mater. Proc. · 2000 · 157 · 1
14. 10.1016/j.actamat.2005.04.02810.1016/j.actamat.2005.04.028 ↗
15. Liu M.W. ‘Evaluation of the formability and effect of as-casting microstructure on AZ63 magnesium alloy in semi-solid state’, Master thesis, Lanzhou University of Technology, Lanzhou, China, 2011.
16. 10.1016/j.jallcom.2010.06.10610.1016/j.jallcom.2010.06.106 ↗
17. 10.3139/146.11061210.3139/146.110612 ↗
18. 10.1016/S1003-6326(11)60775-910.1016/S1003-6326(11)60775-9 ↗
19. Huang L.K. ‘Fabrication of semisolid nondendritic AZ63 magnesium alloy and thixoforming’, Master thesis, Lanzhou University of Technology, Lanzhou, China, 2012.
20. Massalski T.B., and Okamoto H. ‘Binary alloys phase diagrams’; 1990, Metals Park, OH, ASM.
21. 10.1590/S1516-1439201200500007910.1590/S1516-14392012005000079 ↗
22. 10.1016/j.matdes.2008.05.00210.1016/j.matdes.2008.05.002 ↗
23. 10.1016/j.matdes.2005.12.01010.1016/j.matdes.2005.12.010 ↗
24. 10.1016/S1359-6454(96)00312-610.1016/S1359-6454(96)00312-6 ↗
25. 10.1016/j.msea.2004.04.02910.1016/j.msea.2004.04.029 ↗
26. 10.1016/j.msea.2007.02.02910.1016/j.msea.2007.02.029 ↗