Effect of Al and C on structure and mechanical properties of Fe–Al–C alloys
Source abstract
Abstract
Effect of aluminium and carbon content on the microstructure and mechanical properties of Fe–Al–C alloys has been investigated. Alloys were prepared by combination of air induction melting with flux cover (AIMFC) and electroslag remelting (ESR). The ESR ingots were hot forged and hot rolled at 1373 K. As rolled alloys were examined using optical microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to understand the microstructure of these alloys. The ternary Fe–Al–C alloys containing 10·5 and 13 wt-%Al showed the presence of three phases: FeAl with disordered bcc structure, Fe3Al with ordered DO3 structure and Fe3AlC0·5 precipitates with L′12 structure. Addition of high concentration of carbon to these alloys resulted in excellent hot workability and superior tensile at room temperature as well as tensile and creep properties at 873 K. An increase in Al content from 9 to 13 wt-% in Fe–Al–C alloys containing the same levels of carbon has no significant influence on strength and creep properties at 873 K, however resulted in significant improvement in room temperature strength accompanied by a reduction in room temperature ductility.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. 10.1557/JMR.1991.177910.1557/JMR.1991.1779 ↗
2. Sikka V. K., Viswanathan S., and McKamey C. G.: in ‘Structural inter-metallic’, (ed.Darolia R. et al), 483-491; 1993, Warrendale, PA, TMS.
3. Prakash U., Buckley R. A., Jones H., and Sellars C. M.: ISIJ Int. 1991, 31, 1113–1126.10.2355/isijinternational.31.1113 ↗
4. 10.1016/0966-9795(94)90001-910.1016/0966-9795(94)90001-9 ↗
5. Sikka V. K., Viswanathan S., and Vyas S.: in ‘High-temperature ordered intermetallic alloys VI’, (ed.Baker I. et al), Vol. 288, 971-976; 1993, Pittsburgh, PA, MRS.10.1557/PROC-288-971 ↗
6. 10.1023/B:JMSC.0000044907.19670.6110.1023/B:JMSC.0000044907.19670.61 ↗
7. Baligidad R. G., Prakash U., and Radhakrishna A.: Mater. ScL Eng. A, 2000, A281143–147.
8. 10.1016/S0966-9795(98)00050-810.1016/S0966-9795(98)00050-8 ↗
9. Stoloff N. S.: Mater. Set. Eng. A, 1998, A255,1–14.10.1016/S0262-1762(99)80548-3 ↗
10. Baligidad R. G., Prakash U., Radhakrishna A., Ramakrishna Rao V., Rao P. K., and Ballal N. B.: ISIJ Int. 1996, 36, 1215–1221.10.2355/isijinternational.36.1215 ↗
11. 10.1007/BF0264592910.1007/BF02645929 ↗
12. Justusson W. · Am. Soc. Met · 1957 · 49 · 905