journal article·2020-02

Inhibition of stress corrosion cracking in 304 stainless steel through titanium ion implantation

Ming Liu, ChenYu Li, Lin Liu, Youjun Ye, Davoud Dastan, Hamid Garmestani

Materials Science and Technology· Volume 36· Issue 3
Publisher page

Abstract

The effects of titanium ion implantation on the stress corrosion cracking (SCC) behaviour of 304 austenitic stainless steel were studied. Slow strain rate tests (SSRTs) were conducted on 304 steel in air and in 5 wt-% NaCl solution. The microscopic effects of ion implantation were evaluated by Stopping and Range of Ions in Matter Procedures (SRIM). Fracture morphologies and microstructures were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The fracture surfaces illustrate that ion implantation significantly inhibits the corrosion pits that initiate SCC. A dense passive film, which inhibits SCC, was formed during the ion implantation process. SCC initiation was restrained due to the dense dislocation nets that were generated by titanium ion implantation. Highlights Ion implantation inhibits SCC susceptibility. The lack of Cr at the grain boundary leads to the expansion of SCC along the grain boundary. Implantation-induced damage leads to high-density dislocations. The surface was amorphised due to high-density dislocations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fusion materials and technologies · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Changzhou University, Changzhou, People's Republic of China

Jiangsu Key Laboratory of Green Process Equipment, Changzhou University, Changzhou, People's Republic of China

National Quality Supervision and Inspection Center of Pressure Pipe Components, Special Equipment Safety Supervision Inspection Institute of Jiangsu Province, Suzhou, People's Republic of China

School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Funding

ational Natural Science Foundation of China · Natural Science Foundation of Jiangsu Higher Education Institutions · Postdoctoral Research Foundation of China · Qinglan Project of Jiangsu Province of China · Six Talent Peaks Project in Jiangsu Province

References (30)

Show source-provided references
1. 10.1016/j.ijmecsci.2018.05.05610.1016/j.ijmecsci.2018.05.056 ↗
2. 10.1016/j.msea.2019.02.06910.1016/j.msea.2019.02.069 ↗
3. 10.1016/j.msea.2016.12.11810.1016/j.msea.2016.12.118 ↗
4. 10.1016/S0022-3115(03)00002-310.1016/S0022-3115(03)00002-3 ↗
5. 10.1016/j.jallcom.2015.09.15910.1016/j.jallcom.2015.09.159 ↗
6. 10.1016/j.surfcoat.2017.08.05810.1016/j.surfcoat.2017.08.058 ↗
7. 10.1016/j.corsci.2012.03.04410.1016/j.corsci.2012.03.044 ↗
8. 10.1016/j.engfailanal.2018.04.04510.1016/j.engfailanal.2018.04.045 ↗
9. 10.1016/j.msea.2018.07.01610.1016/j.msea.2018.07.016 ↗
10. 10.1016/j.vacuum.2017.11.02410.1016/j.vacuum.2017.11.024 ↗
11. 10.1016/j.scriptamat.2018.08.03310.1016/j.scriptamat.2018.08.033 ↗
12. Article R, Dastan D. Nanostructured anatase titania thin films prepared by sol-gel dip coating technique, 2015.10.26713/jamcnp.v2i2.331 ↗
13. 10.1166/asl.2016.713010.1166/asl.2016.7130 ↗
14. 10.1007/s10854-016-4985-410.1007/s10854-016-4985-4 ↗
15. 10.1016/j.apsusc.2016.09.06810.1016/j.apsusc.2016.09.068 ↗
16. 10.1016/j.jpowsour.2009.06.03010.1016/j.jpowsour.2009.06.030 ↗
17. 10.1016/j.surfcoat.2012.04.03810.1016/j.surfcoat.2012.04.038 ↗
18. 10.1016/j.apsusc.2018.01.02110.1016/j.apsusc.2018.01.021 ↗
19. 10.1016/j.pnsc.2017.07.00310.1016/j.pnsc.2017.07.003 ↗
20. Weng D · Mater Chem Phys · 2010 · 54 · 338
21. 10.1016/j.scriptamat.2016.06.00910.1016/j.scriptamat.2016.06.009 ↗
22. Agrawal A, Durr C, Koch G. Sulfide films and corrosion rates of AISI 1018 carbon steel in saline solutions in the presence of H 2 S and CO 2 at temperatures up to 175F. Corrosion. 2004.
23. 10.1016/j.matlet.2011.11.01410.1016/j.matlet.2011.11.014 ↗
24. 10.1016/j.nimb.2017.08.03610.1016/j.nimb.2017.08.036 ↗
25. 10.1016/j.nimb.2016.09.01510.1016/j.nimb.2016.09.015 ↗
26. 10.1016/S1003-6326(17)60078-510.1016/S1003-6326(17)60078-5 ↗
27. 10.1016/j.corsci.2016.02.00710.1016/j.corsci.2016.02.007 ↗
28. 10.1016/S0022-3115(03)00003-510.1016/S0022-3115(03)00003-5 ↗
29. 10.1016/S0022-3115(01)00615-810.1016/S0022-3115(01)00615-8 ↗
30. 10.1016/j.jnucmat.2003.11.00710.1016/j.jnucmat.2003.11.007 ↗