journal article·2012-02

Experimental analysis of mechanisms related to white layer formation during hard turning of AISI 52100 bearing steel

D Umbrello, G Rotella

Materials Science and Technology· Volume 28· Issue 2
Publisher page

Abstract

Microstructural phase transformations, commonly named white layer on hard turned components, are becoming one of the most interesting research subjects for the scientific community. Three main theories have been proposed to justify the mechanisms of white layer formation: rapid heating and quenching, which results in sudden microstructural phase transformation; severe plastic deformation, which produces a homogenous structure and/or a very fine grain size microstructure; and surface reaction with the environment. The present work aims to understand which of the above mentioned mechanisms is the main cause of the white layer formation when AISI 52100 hardened steel is machined by cubic boron nitride inserts. For this reason, an experimental campaign was carried out, and several experimental techniques were used in order to analyse the machined surface. In particular, optical and scanning electron microscope were utilised for surface topography characterisation, while microstructural phase composition and chemical characterisation have been performed by means of X-ray diffraction and energy dispersive spectroscopy techniques. The experimental results prove that the white layer is the result of microstructural alteration, i.e. the generation of a martensitic structure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of Calabria, Ponte P. Bucci, cubo 45/C, Rende 87036, Italy

Department of Production Systems and Business Economics, Politecnico di Torino, Corso Duca degli Abruzzi 24, Turin 10129, Italy

References (33)

Show source-provided references
1. 10.1016/S0007-8506(07)61003-810.1016/S0007-8506(07)61003-8 ↗
2. 10.1016/S0007-8506(07)63455-610.1016/S0007-8506(07)63455-6 ↗
3. Guo YB · Surf. Coat. Technol. · 2005 · 27 · 1051
4. Hashimoto F · Int. J. Mach. Mach. Mater. · 2009 · 6 · 3
5. Guo YB · Trans. NAMRI/SME · 2004 · 32 · 367
6. 10.1016/S0007-8506(07)63131-X10.1016/S0007-8506(07)63131-X ↗
7. 10.1016/j.ijmachtools.2007.09.00710.1016/j.ijmachtools.2007.09.007 ↗
8. 10.1016/j.cirp.2009.03.10610.1016/j.cirp.2009.03.106 ↗
9. 10.1016/j.msea.2004.08.05210.1016/j.msea.2004.08.052 ↗
10. 10.1016/j.surfcoat.2004.12.02810.1016/j.surfcoat.2004.12.028 ↗
11. Chou YK · Trans. NAMRI SME · 1998 · 26 · 117
12. 10.1016/S0921-5093(01)01447-210.1016/S0921-5093(01)01447-2 ↗
13. 10.1016/S0890-6955(99)00036-X10.1016/S0890-6955(99)00036-X ↗
14. Ramesh A: ‘Prediction of process-induced microstructuralchanges in orthogonal hard machining’, PhDthesis, Mechanical Engineering Department, GeorgiaInstitute of Technology, Atlanta, GA, USA, 2002.
15. 10.1115/1.128636710.1115/1.1286367 ↗
16. 10.1115/1.326101510.1115/1.3261015 ↗
17. Stead JW · J. West Scot. Iron Steel Inst. · 1912 · 19 · 169
18. 10.1016/S0007-8506(07)60018-310.1016/S0007-8506(07)60018-3 ↗
19. 10.1007/s11661-002-0225-z10.1007/s11661-002-0225-z ↗
20. 10.1016/S0043-1648(01)00609-310.1016/S0043-1648(01)00609-3 ↗
21. 10.1016/0167-6636(94)90052-310.1016/0167-6636(94)90052-3 ↗
22. 10.1016/0956-7151(93)90026-O10.1016/0956-7151(93)90026-O ↗
23. 10.1016/S0043-1648(97)00099-910.1016/S0043-1648(97)00099-9 ↗
24. 10.1016/j.ijmachtools.2003.10.00910.1016/j.ijmachtools.2003.10.009 ↗
25. Brinksmeir E, Brockhoff T: ‘White layers in machining steels’, Proc.2nd Int. German and French Conf. on ‘High speed machining’, 7–13; 1999, Darmstadt, Technical University of Darmstadt.
26. 10.1016/S0924-0136(96)02551-410.1016/S0924-0136(96)02551-4 ↗
27. 10.1016/S0921-5093(00)01842-610.1016/S0921-5093(00)01842-6 ↗
28. Ramesh A, Thiele J, Melkote S: ‘Residual stress and sub-surface flowin finish hard turned AISI 4340 and 52100 steels: a comparative study’, Proc.ASME Conf. on ‘Manufacturing science and engineering’, Nashville,TN, USA, November 1999, ASME, 831–837.10.1115/IMECE1999-0747 ↗
29. Zurecki Z, Ghosh R, Frey JH: ‘Investigation of white layers formedin conventional and cryogenic hard turning of steels’, Proc.ASME Int. Cong. Exp. on ‘Mechanical engineering’, Washington,DC, USA, November 2003, ASME, 1–10.10.1115/IMECE2003-42313 ↗
30. JointCommittee on Powder Diffraction Standards (JCPDS): ‘Powderdiffraction file, inorganic volume’, sets 6–10, 150, 1980.
31. JointCommittee on Powder Diffraction Standards (JCPDS): ‘Powderdiffraction file, inorganic volume’, sets 35–36, 283, 1990.
32. JointCommittee on Powder Diffraction Standards (JCPDS): ‘Powderdiffraction file, inorganic volume’, sets 31–32, 209, 1988.
33. 10.1016/j.msea.2007.11.08110.1016/j.msea.2007.11.081 ↗