journal article·2012-12

Development of wrought precipitation strengthened IN939 superalloy

M R Jahangiri, H Arabi, S M A Boutorabi

Materials Science and Technology· Volume 28· Issue 12
Publisher page

Abstract

The potential of cast IN939 superalloy to be converted to wrought alloy has been explored in the present work. For this objective, bars of cast alloy were rolled under different conditions and then subjected to various heat treatment cycles. The results indicated that the yield strength, ultimate tensile strength and ductility of the wrought IN939 alloy are superior to the cast version. The stress rupture properties of wrought IN939 superalloy are better than those of the widely used superalloys, such as Nimonic 90 and Waspaloy, and approach the alloy Nimonic 105 properties. This is very notable because Nimonic 105 contains ∼45 vol.- γ′ that is much greater than the volume fraction of those strengthening precipitates in the alloy IN939 (∼35). On the whole, the wrought form of this alloy has a high potential for manufacturing hot components to be used safely under aggressive turbine environment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran 16846-13114, Iran

Metallurgy Department, Niroo Research Institute, Tehran 14686, Iran

Center of Excellence for Advanced Materials & Processing, IUST, Tehran, Iran

References (55)

Show source-provided references
1. 10.1002/9780470432754.ch410.1002/9780470432754.ch4 ↗
2. 10.1179/174328408X37205610.1179/174328408X372056 ↗
3. 10.1007/s11837-006-0079-810.1007/s11837-006-0079-8 ↗
4. 10.1179/174328408X35544210.1179/174328408X355442 ↗
5. Gibbons TB, Stickler R:in ‘High temperature alloys for gas turbines’(, Brunetaud R, et al.), 369–393; 1982, Dordrecht, D. Reidel Publishing.10.1007/978-94-009-7907-9_15 ↗
6. Shaw SWK: ‘Superalloys 1980’, 275–284; 1980, Materials Park, OH, ASM.10.7449/1980/Superalloys_1980_275_284 ↗
7. 10.1179/mst.1986.2.10.103110.1179/mst.1986.2.10.1031 ↗
8. 10.1016/j.msea.2007.08.04710.1016/j.msea.2007.08.047 ↗
9. Murata Y, Hashizume R, Yoshinari A, Aoki N, Morinaga M, Fukui Y: ‘Superalloys 2000’, 285–294; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_285_294 ↗
10. DavisJR: ‘ASM specialty handbook: Heat resistant materials’; 1997, Materials Park, OH, ASM International.
11. 10.1016/j.msea.2011.07.01910.1016/j.msea.2011.07.019 ↗
12. Sims CT, Stoloff NS, Hagel WC: ‘Superalloys II’; 1987, New York, John Wiley & Sons.
13. 10.1007/BF0265880810.1007/BF02658808 ↗
14. MalleyDR: US Patent 5,938,863, 1999.
15. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
16. 10.1007/BF0264398410.1007/BF02643984 ↗
17. Bradley EF: ‘Superalloys: a technical guide’; 1988, Materials Park, OH, ASM International.
18. 10.1179/174328407X21332310.1179/174328407X213323 ↗
19. ‘Nimonic alloy 105 product specifications’, Publication no. SMC-081, Special Metals Corporation, New Hartford, NY, USA, 2007.
20. ‘Nimonic alloy 90 product specifications’, Publication no. SMC-080, Special Metals Corporation, New Hartford, NY, USA, 2004.
21. Inconel alloy 740 product specifications, Publication no. SMC-090, Special Metals Corporation, New Hartford, NY, USA, 2004.
22. 10.1007/s11661-011-0627-x10.1007/s11661-011-0627-x ↗
23. 10.1179/026708310X1281599241813910.1179/026708310X12815992418139 ↗
24. 10.1007/s11663-009-9227-110.1007/s11663-009-9227-1 ↗
25. 10.1016/j.ijfatigue.2010.09.02210.1016/j.ijfatigue.2010.09.022 ↗
26. 10.1557/jmr.2011.34610.1557/jmr.2011.346 ↗
27. 10.1016/0025-5416(86)90267-310.1016/0025-5416(86)90267-3 ↗
28. 10.1002/adem.20100023210.1002/adem.201000232 ↗
29. 10.1016/j.msea.2007.06.07210.1016/j.msea.2007.06.072 ↗
30. 10.1016/j.matdes.2010.07.04010.1016/j.matdes.2010.07.040 ↗
31. 10.1017/CBO978051175551410.1017/CBO9780511755514 ↗
32. Dieter GE, Kuhn HA, Semiatin SL: ‘Handbook of workability and process design’; 2003, Materials Park, OH, ASM International.
33. 10.31399/asm.tb.stg2.978162708267910.31399/asm.tb.stg2.9781627082679 ↗
34. 10.1179/1879139511Y.000000001010.1179/1879139511Y.0000000010 ↗
35. Betteridge W: ‘The nimonic alloys and other nickel-base high-temperature alloys’; 1974, London, Edward Arnold Limited.
36. ‘Waspaloy product specifications’, Publication no. SMC-011, Special Metals Corporation, New Hartford, NY, USA, 2004.
37. 10.1007/BF0258615210.1007/BF02586152 ↗
38. 10.4028/www.scientific.net/AMR.278.25910.4028/www.scientific.net/AMR.278.259 ↗
39. 10.1007/s11661-001-0014-010.1007/s11661-001-0014-0 ↗
40. 10.1016/j.msea.2006.08.14810.1016/j.msea.2006.08.148 ↗
41. 10.1016/j.ijplas.2011.07.00310.1016/j.ijplas.2011.07.003 ↗
42. 10.1016/0001-6160(82)90049-910.1016/0001-6160(82)90049-9 ↗
43. 10.1016/S0921-5093(97)00373-010.1016/S0921-5093(97)00373-0 ↗
44. 10.1080/0882750020854743510.1080/08827500208547435 ↗
45. 10.1007/BF0054979610.1007/BF00549796 ↗
46. 10.1016/j.msea.2008.04.12810.1016/j.msea.2008.04.128 ↗
47. Salel GP · Phys. Status Solidi · 1969 · 35 · 11
48. Durand-Charre M: ‘The microstructure of superalloys’; 1997, Amsterdam, Gordon and Breach Science Publishers.
49. 10.4028/www.scientific.net/DDF.297-301.82610.4028/www.scientific.net/DDF.297-301.826 ↗
50. 10.1016/S0167-577X(03)00078-810.1016/S0167-577X(03)00078-8 ↗
51. 10.1016/j.jallcom.2008.07.12710.1016/j.jallcom.2008.07.127 ↗
52. 10.1016/j.msea.2010.03.05310.1016/j.msea.2010.03.053 ↗
53. 10.1007/s11661-002-0325-910.1007/s11661-002-0325-9 ↗
54. 10.4028/www.scientific.net/MSF.638-642.5310.4028/www.scientific.net/MSF.638-642.53 ↗
55. 10.1007/s11665-010-9731-010.1007/s11665-010-9731-0 ↗