Effect of grain size on austenite stability and room temperature low cycle fatigue behaviour of solution annealed AISI 316LN austenitic stainless steel
Source abstract
Abstract
The present paper investigates completely reversed room temperature low cycle fatigue (LCF) behaviour of solution annealed austenitic stainless steel AISI 316L with two different grain sizes of 90 and 139 μm developed by solution annealing treatment at 1050 and 1150°C respectively and at six strain amplitudes ranging between ± 0·375 and ± 1·00%. Complete cyclic hardening has been observed for both the grain sizes. While fine grained steel shows an improvement in cyclic life compared with that of coarse grained steel for strain amplitudes ± 0·375 and ± 0·50%, and perfectly follows the Coffin–Manson (C–M) behaviour within the experimental domain, higher cyclic life with bilinear C–M behaviour is observed in the case of coarse grained steel at ± 0·625% strain amplitude and above. Optical microscopy of fatigue fracture surfaces reveals the formation of martensite on cyclic straining predominantly at higher strain amplitudes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 10.1007/BF0290022710.1007/BF02900227 ↗
2. 10.1016/0036-9748(71)90059-710.1016/0036-9748(71)90059-7 ↗
3. Thompson A. W., and Backofen W. A.: Acta Metall. 1971, 19, 597.10.1016/0001-6160(71)90012-5 ↗
4. Liang F. L., and Laird C.: Mater. Sci. Eng. A, 1989, A117, 95.10.1016/0921-5093(89)90090-7 ↗
5. 10.1007/BF0264432210.1007/BF02644322 ↗
6. 10.1007/BF0264283810.1007/BF02642838 ↗
7. Hornbogen E.: Acta Metall. 1978, 26,147.10.1016/0001-6160(78)90211-0 ↗
8. 10.1016/0025-5416(77)90176-810.1016/0025-5416(77)90176-8 ↗
9. Tjong S. C., and Ho N. J.: Mater. Sci. Eng. A, 1988, A102, 125.10.1016/0025-5416(88)90540-X ↗
10. 10.1007/BF0264294510.1007/BF02642945 ↗
11. 10.1179/mst.1994.10.7.61410.1179/mst.1994.10.7.614 ↗
12. Dieter G. E. ‘Mechanical metallurgy’, SI Metric Edn., 192; 1988, London, McGraw-Hill.
13. 10.1016/0142-1123(95)00078-X10.1016/0142-1123(95)00078-X ↗
14. Pulmbridge W. J. · Fatigue Eng. Mater. Struct · 1980 · 3 · 117
15. Chai H. F., and Laird H. B.: Mater. Sci. Eng. A, 1987, A93, 159.10.1016/0025-5416(87)90421-6 ↗
16. Lerch B. A., and Gerold A.: Acta Metall. 1985, 33, 1709.10.1016/0001-6160(85)90165-8 ↗
17. Duyi Y., Saburo M., Noburo N., and Naoyuki S.: Mater. Sci. Eng. A, 2006, A415, 104.
18. Ho N. J., and Tjong S. C.: Mater. Sci. Eng. A, 1987, A94, 195.10.1016/0025-5416(87)90333-8 ↗
19. 10.1007/BF0266135710.1007/BF02661357 ↗
20. 10.1007/BF0265833410.1007/BF02658334 ↗
21. Bhanushankar Rao K. · Metall. Trans. A · 1993 · 24 · 91310.1007/BF02656512 ↗
22. 10.1016/j.ijfatigue.2004.05.00310.1016/j.ijfatigue.2004.05.003 ↗
23. Stolarz J., Baffle N., and Magnin T.: Mater. Sci. Eng. A, 2001, A319—A321, 521.10.1016/S0921-5093(01)01072-3 ↗
24. 10.1007/BF0291754210.1007/BF02917542 ↗
25. Chakraborti P. C., and Bhattacharjee D.: unpublished work.
26. 10.1016/0142-1123(94)90005-110.1016/0142-1123(94)90005-1 ↗
27. 10.1016/0142-1123(95)93539-E10.1016/0142-1123(95)93539-E ↗
28. 10.1016/S1359-6462(03)00363-410.1016/S1359-6462(03)00363-4 ↗
29. 10.1016/j.ijfatigue.2005.06.02410.1016/j.ijfatigue.2005.06.024 ↗
30. 10.2355/isijinternational1966.23.83410.2355/isijinternational1966.23.834 ↗
31. Morrow J. D. ‘Internal friction, damping and cyclic plasticity’, ASTM STP,Vol. 378, 45; 1965, Philadelphia, PA, ASTM.
32. 10.1080/1478643680822752410.1080/14786436808227524 ↗