journal article·2004-10

Low temperature synthesis of Ti3SiC2from Ti/SiC/C powders

Z.F. Zhang, Z.M. Sun, H. Hashimoto

Materials Science and Technology· Volume 20· Issue 10
Publisher page

Abstract

Ternary carbide Ti3 SiC2 was first synthesised through a pulse discharge sintering (PDS) technique from mixtures of Ti, SiC, and C with different molar ratios. Sintering processes were conducted at 1200 – 1400°C for 15 – 60 min at a pressure of 50 MPa. The phase constituents and microstructures of the synthesised samples were analysed by X-ray diffraction (XRD) technique and observed by scanning electron microscopy (SEM). The results showed that, for samples sintered from 3Ti/SiC/C powder at 1200 – 1400°C, TiC is always the main phase and only little Ti3 SiC2 phase is formed. When the molar ratios Ti : SiC : C were adjusted to 3 : 1.1 : 2 and 5 : 2 : 1, the purity of Ti3 SiC2 in the synthesised samples was improved to about 93 wt-%. The optimum sintering temperature for Ti3 SiC2 samples was found to be in the range 1250 – 1300°C and all the synthesised samples contain platelike grains. The relative density of Ti3 SiC2 samples was measured to be higher than 99% at sintering temperatures above 1300⊂C. It is suggested that the PDS technique can rapidly synthesise ternary carbide Ti3 SiC2 with good densification at lower sintering temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. 10.1016/0955-2219(89)90022-810.1016/0955-2219(89)90022-8 ↗
2. 10.1038/3503668610.1038/35036686 ↗
3. 10.1016/S0022-3697(98)00313-810.1016/S0022-3697(98)00313-8 ↗
4. BARSOUM M. W. · J. Mater. Synth. Process · 1997 · 5 · 197
5. 10.1179/02670830122500065310.1179/026708301225000653 ↗
6. 10.1016/S0079-6786(00)00006-610.1016/S0079-6786(00)00006-6 ↗
7. 10.1016/0025-5408(87)90128-010.1016/0025-5408(87)90128-0 ↗
8. 10.1111/j.1151-2916.1995.tb08230.x10.1111/j.1151-2916.1995.tb08230.x ↗
9. 10.1016/0167-577X(94)00246-010.1016/0167-577X(94)00246-0 ↗
10. 10.1023/A:100466450025410.1023/A:1004664500254 ↗
11. 10.1023/A:100666441684510.1023/A:1006664416845 ↗
12. 10.2320/matertrans1989.41.60510.2320/matertrans1989.41.605 ↗
13. BARSOUM M. W. · J. Ant Ceram. Soc · 1996 · 79 · 1953— 1956
14. 10.1111/j.1151-2916.1999.tb02166.x10.1111/j.1151-2916.1999.tb02166.x ↗
15. 10.1016/S0022-0248(00)00870-810.1016/S0022-0248(00)00870-8 ↗
16. 10.1007/BF0035203710.1007/BF00352037 ↗
17. 10.1016/S0925-8388(99)00003-110.1016/S0925-8388(99)00003-1 ↗
18. 10.1007/s10019005007610.1007/s100190050076 ↗
19. 10.1016/S0966-9795(98)00090-910.1016/S0966-9795(98)00090-9 ↗
20. ZHANG Z. F. · Ser. Mater · 2001 · 45 · 1461
21. 10.1007/s11661-002-0320-110.1007/s11661-002-0320-1 ↗
22. 10.1007/s11661-997-0275-310.1007/s11661-997-0275-3 ↗
23. 10.1016/0167-577X(94)90037-X10.1016/0167-577X(94)90037-X ↗
24. 10.1016/S0022-3697(98)00226-110.1016/S0022-3697(98)00226-1 ↗
25. 10.1007/s10019-002-8644-410.1007/s10019-002-8644-4 ↗