Primary creep in single crystal superalloys: Some comments on effects of composition and microstructure
Source abstract
Abstract
Creep at low temperatures in current single crystal superalloys is characterised by a large but orientation dependent primary creep strain followed by prolonged secondary creep at a rate closely linked to the primary creep strain. The processes of incubation, nucleation and propagation are described and the linked effects of alloy composition and microstructure are discussed in relation to these processes. It is shown that the incubation period is relatively insensitive to the alloy composition but that heat treatments which vary the γ′ size can have a larger effect on the early stages of creep. The key to high primary creep appears to be the mobility of the dislocation ribbons nucleated and this is sensitive to the alloy composition. Fault energies in both the γ and the γ′ are important in determining the form of the dislocation ribbons. Early results suggest that ruthenium may have a beneficial effect reducing the primary creep of fourth generation alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. 10.1007/BF0281156010.1007/BF02811560 ↗
2. 10.1016/j.actamat.2006.09.02610.1016/j.actamat.2006.09.026 ↗
3. 10.1007/BF0264783010.1007/BF02647830 ↗
4. Rae C. M. F., Kakehi K., and Reed R. C.: Proc. 7th Liege Conf. on ‘Materials for advanced power engineering’, COST, Liege, Belgium, September 2002,207–216.
5. 10.1016/j.actamat.2007.11.03110.1016/j.actamat.2007.11.031 ↗
6. Drew G. L., Reed R. C., Kakehi K., and Rae C. M. F.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 127-136; 2004, Warrendale, PA, TMS.10.7449/2004/Superalloys_2004_127_136 ↗
7. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
8. Caron P., Ohta Y., Nakagawa Y. G., and Kahn T.: Proc. 6th Int. Symp. on ‘Superalloys’, (ed.Reichman S. et al), 215-224; 1988, Warrendale, PA, The Metallurgical Society of AIME.10.7449/1988/Superalloys_1988_215_224 ↗
9. 10.1007/s11661-000-0139-610.1007/s11661-000-0139-6 ↗
10. Drew G. L. · 2004 · Cambridge
11. Chen Q. Z., and Knowles D. M.: Mater. Set Eng. A, 2003, A356,352–367.10.1016/S0921-5093(03)00148-5 ↗
12. Murakami H., Yamagata T., Harada H., and Yamazaki M.: Mater. Set Eng. A, 1997, A223,54–58.10.1016/S0921-5093(96)10494-9 ↗
13. Reppich B.: in ‘Materials science and technology’, (ed.Mugrabi H.), Vol. 6, ‘Plastic deformation and fracture of materials’, Ch. 7, 312; 1993, VCH, Weinheim.
14. 10.1016/0956-7151(92)90195-K10.1016/0956-7151(92)90195-K ↗
15. Sass V., Glatzel U., and Feller-Kniepmeier M. ‘Superalloys 1996’, (ed.Kissinger R. D. et al), 283-290; 1996, Warrendale, PA, TMS.10.7449/1996/Superalloys_1996_283_290 ↗
16. 10.1007/BF0264963710.1007/BF02649637 ↗
17. Nathal M. V. · Metall Trans. A · 1984 · 16 · 1894
18. Nathal M. V. · Metall Trans. A · 1984 · 16 · 186310.1007/BF02670373 ↗
19. MacKay R. · Metall. Trans. A · 1990 · 21 · 31810.1007/BF02782418 ↗
20. Hobbs R. A., Brewster G. J, Rae C. M. F., and Tin S.: Proc. 11th Int. Symp. on ‘Superalloys’, (ed.Reed R. C. et al), Warrendale, PA, TMS, 2008,171–180.10.7449/2008/Superalloys_2008_171_180 ↗
21. Rae C. M. F.: Rolls-Royce Report No. Fact alloys 2001.
22. Hobbs R. A., Zhang L., Rae C. M. F., and Tin S.: Mater. Set Eng. A, 2008, A489,65–76.10.1016/j.msea.2007.12.045 ↗
23. Tsuno N., Shimabayashi S., Kakehi K., Rae C. M. F., and Reed R. C.: Proc. 11th Int. Symp. on ‘Superalloys’, (ed.Reed R. C. et al), Warrendale, PA, TMS, 2008.
24. Yeh A. C., Rae C. M. F., and Tin S.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 677-686; 2004, Warrendale, PA, TMS.10.7449/2004/Superalloys_2004_677_685 ↗