journal article·2018-11Open access

Medical-grade ultra-high molecular weight polyethylene: Past, current and future

Fedra Parnian Zaribaf

Materials Science and Technology· Volume 34· Issue 16

Abstract

Ultra-high molecular weight polyethylene is a semi-crystalline polymer (45–60%) with six decades of orthopaedic applications. This polymer has a high fracture toughness (30 kJ m −2 ) which comes from the molecular weight and the chain entanglements. Adverse alteration of the properties may lead to the part's pre-mature failure. This paper reviews the current manufacturing methods, and their effect on the properties of the polymer. The review also focused on the attempts of enhancing the polymer properties. The main cause of failure is implant loosing owing to the polymeric wear particles. Many manufacturers have attempted to enhance the wear and oxidation properties of the polymer, and the outcome of the new technologies is critically reviewed. Finally, the review explores the potential for future developments. This review was submitted as part of the 2018 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Total Knee Arthroplasty Outcomes · Orthopedic Infections and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of Bath, Bath, UK

References (100+)

Show source-provided references
1. 10.1097/01.blo.0000187811.48717.9d10.1097/01.blo.0000187811.48717.9d ↗
2. 10.1016/0043-1648(87)90201-810.1016/0043-1648(87)90201-8 ↗
3. 10.1016/S0142-9612(99)00053-810.1016/S0142-9612(99)00053-8 ↗
4. 10.1016/j.triboint.2015.12.04110.1016/j.triboint.2015.12.041 ↗
5. 10.1016/j.wear.2011.05.03410.1016/j.wear.2011.05.034 ↗
6. 10.1016/1350-4533(94)90042-610.1016/1350-4533(94)90042-6 ↗
7. Standardization IO. ISO 5834-1, implants for surgery – ultra-high-molecular-weight polyethylene – part 1: powder form; 2005.
8. National-Joint-Registry. Annual reports. Technical report, National Joint Registry for England, Wales, Northern Ireland and the Isle of Man; 2017.
9. 10.2106/JBJS.H.0015510.2106/JBJS.H.00155 ↗
10. 10.1016/B978-0-323-35401-1.00004-110.1016/B978-0-323-35401-1.00004-1 ↗
11. 10.1016/B978-0-323-35401-1.00008-910.1016/B978-0-323-35401-1.00008-9 ↗
12. Kurtz SM · 2016
13. Kurtz SM · 2016
14. Kurtz SM · 2016
15. Wood P · Bone Joint J · 2003 · 85 · 334
16. 10.1002/jbm.b.3064910.1002/jbm.b.30649 ↗
17. Grey SG · Bull Hosp Joint Dis (2013) · 2015 · 73 · S86
18. 10.4236/ojo.2015.5903810.4236/ojo.2015.59038 ↗
19. 10.1016/S0043-1648(01)00657-310.1016/S0043-1648(01)00657-3 ↗
20. Watts A · J Bone Joint Surg · 2011 · 1 · 110.2106/JBJS.CC.K.00019 ↗
21. 10.1016/0141-5425(91)90130-Y10.1016/0141-5425(91)90130-Y ↗
22. Kurtz SM · 2016
23. Kurtz SM · 2016
24. 10.1097/BRS.000000000000063710.1097/BRS.0000000000000637 ↗
25. 10.1097/BRS.000000000000107810.1097/BRS.0000000000001078 ↗
26. Binte Wahed S. Synthetic anterior cruciate ligament implants utilising UHMWPE-polyethylene fibre doped with bioactivity enhancing additives [Master's thesis]. University of Sydney; 2016.
27. Alinejad M, Pegg E, Dodd C, et al. Artificial anterior cruciate ligament (ACL) reconstruction for more natural knee kinematics. In: 4th Joint Meeting of the Bone Research Society & the British Orthopaedic Research Society; University of Bath; 2013.
28. Siskey R · 2015 · 398
29. 10.1007/s00238-002-0407-310.1007/s00238-002-0407-3 ↗
30. 10.1002/jbm.b.3107210.1002/jbm.b.31072 ↗
31. 10.1016/j.msec.2016.12.10410.1016/j.msec.2016.12.104 ↗
32. 10.1186/1746-160X-8-1710.1186/1746-160X-8-17 ↗
33. 10.1007/s10006-006-0688-y10.1007/s10006-006-0688-y ↗
34. 10.1007/s00266-012-9911-410.1007/s00266-012-9911-4 ↗
35. Kurtz S. From ethylene gas to UHMWPE component: the process of producing orthopedic implants. UHMWPE: Biomaterials Handbook. Elsevier; 2009. p. 7–19.10.1016/B978-0-12-374721-1.00002-X ↗
36. 10.1016/B978-0-323-35401-1.00001-610.1016/B978-0-323-35401-1.00001-6 ↗
37. 10.1016/j.wear.2007.01.12010.1016/j.wear.2007.01.120 ↗
38. Burstein AH. Process for forming shaped articles of ultra high molecular weight polyethylene suitable for use as a prosthetic device or a component thereof. US Patent 6,503,439. 2003.
39. 10.1016/S0043-1648(99)00066-610.1016/S0043-1648(99)00066-6 ↗
40. Salles J · Matéria · 2003 · 8 · 1
41. ASTM F648 - 14. Standard specification for ultra-high-molecular-weight polyethylene powder and fabricated form for surgical implants; 2012.
42. 10.1016/S0032-3861(97)00448-510.1016/S0032-3861(97)00448-5 ↗
43. Sun D, Stark C, Dumbleton J. The origin of the white band observed in direct compression molded UHMWPE inserts. In: Annual meeting-society for biomaterials in conjunction with the international biomaterials symposium. Vol. 17. Society for Biomaterials; 1994. p. 121–121.
44. 10.1016/S0142-9612(02)00117-510.1016/S0142-9612(02)00117-5 ↗
45. 10.1097/00003086-200112000-0001110.1097/00003086-200112000-00011 ↗
46. Bankston BA · Clin Orthop Relat Res · 1995 · 317 · 37
47. McKellop HA, Shen F-W. Wear resistant surface-gradient crosslinked polyethylene. US Patent 6,165,220. 2000.
48. 10.1002/(SICI)1097-4636(2000)53:2<143::AID-JBM3>3.0.CO;2-510.1002/(SICI)1097-4636(2000)53:2<143::AID-JBM3>3.0.CO;2-5 ↗
49. 10.1097/01.blo.0000185310.59202.e510.1097/01.blo.0000185310.59202.e5 ↗
50. 10.1016/j.jbiomech.2007.09.00510.1016/j.jbiomech.2007.09.005 ↗
51. 10.1054/arth.2001.2054010.1054/arth.2001.20540 ↗
52. 10.1016/S0142-9612(99)00039-310.1016/S0142-9612(99)00039-3 ↗
53. 10.1080/1745367071001534910.1080/17453670710015349 ↗
54. 10.1097/01.blo.0000238856.61862.7d10.1097/01.blo.0000238856.61862.7d ↗
55. 10.1007/s10195-008-0038-y10.1007/s10195-008-0038-y ↗
56. Bertin EP. · 2012
57. 10.1016/j.biomaterials.2009.07.01310.1016/j.biomaterials.2009.07.013 ↗
58. 10.1016/j.biomaterials.2003.10.05410.1016/j.biomaterials.2003.10.054 ↗
59. 10.1097/01.blo.0000148783.20469.4c10.1097/01.blo.0000148783.20469.4c ↗
60. 10.1002/jbm.a.1060610.1002/jbm.a.10606 ↗
61. Gul RM, Oral E, Muratoglu OK. Oxidation resistant peroxide cross-linked UHMWPE produced by blending and surface diffusion. In: IOP Conference Series: Materials Science and Engineering. Vol. 60. IOP Publishing; 2014. p. 012015.10.1088/1757-899X/60/1/012015 ↗
62. 10.1016/S0883-5403(99)90086-410.1016/S0883-5403(99)90086-4 ↗
63. 10.1002/jbm.82025080710.1002/jbm.820250807 ↗
64. 10.1016/S0141-3910(98)00058-510.1016/S0141-3910(98)00058-5 ↗
65. Kurtz SM · 2016
66. Muratoglu OK, Bragdon C, O'Connor D, et al. A comparison of 5 different types of highly crosslinked UHMWPE: physical properties and wear behavior. In: Annual Meeting-Society for Biomaterials in Conjunction with International Biomaterials Symposium. Vol. 22; 1999. p. 326–326.
67. 10.1007/s11999-011-1872-410.1007/s11999-011-1872-4 ↗
68. 10.1016/j.arth.2011.07.00310.1016/j.arth.2011.07.003 ↗
69. 10.1016/j.arth.2007.09.02710.1016/j.arth.2007.09.027 ↗
70. 10.1016/j.biomaterials.2005.06.02510.1016/j.biomaterials.2005.06.025 ↗
71. 10.1016/j.biomaterials.2005.09.03310.1016/j.biomaterials.2005.09.033 ↗
72. 10.1002/app.1993.07050101510.1002/app.1993.070501015 ↗
73. 10.1016/j.matdes.2009.05.00110.1016/j.matdes.2009.05.001 ↗
74. 10.1002/jbm.b.3094210.1002/jbm.b.30942 ↗
75. 10.1016/S0142-9612(00)00195-210.1016/S0142-9612(00)00195-2 ↗
76. 10.1002/jbm.b.3290210.1002/jbm.b.32902 ↗
77. Scott ML, Jani SC. Cross-linked ultra-high molecular weight polyethylene for medical implant use. US Patent 6,547,828. 2003.
78. 10.3109/17453674.2014.97289010.3109/17453674.2014.972890 ↗
79. 10.1016/S0142-9612(00)00182-410.1016/S0142-9612(00)00182-4 ↗
80. 10.1016/S0142-9612(97)00160-910.1016/S0142-9612(97)00160-9 ↗
81. 10.1016/j.arth.2007.03.00910.1016/j.arth.2007.03.009 ↗
82. 10.2106/JBJS.F.0099110.2106/JBJS.F.00991 ↗
83. Zaribaf P, Gill H, Pegg E. Fatty-acid absorption detrimentally changes the physical properties of ultra-high molecular weight polyethylene. In: 16th UK Society for Biomaterials Annual Conference. University of Bath; 2017.
84. 10.1016/0142-9612(93)90062-710.1016/0142-9612(93)90062-7 ↗
85. 10.1016/j.arth.2005.07.01910.1016/j.arth.2005.07.019 ↗
86. 10.1007/s11999-011-2177-310.1007/s11999-011-2177-3 ↗
87. Am Jung K · Orthopedics · 2008 · 31 · 137
88. 10.1080/1745367071001451810.1080/17453670710014518 ↗
89. 10.1016/j.jmbbm.2012.12.00610.1016/j.jmbbm.2012.12.006 ↗
90. 10.1007/s00264-010-1161-y10.1007/s00264-010-1161-y ↗
91. 10.1016/j.polymdegradstab.2007.02.02310.1016/j.polymdegradstab.2007.02.023 ↗
92. 10.1007/s11999-010-1717-610.1007/s11999-010-1717-6 ↗
93. 10.1016/j.biomaterials.2008.05.00410.1016/j.biomaterials.2008.05.004 ↗
94. 10.1016/j.arth.2005.07.00910.1016/j.arth.2005.07.009 ↗
95. 10.1016/j.biomaterials.2006.07.01710.1016/j.biomaterials.2006.07.017 ↗
96. 10.1016/j.biomaterials.2003.12.04810.1016/j.biomaterials.2003.12.048 ↗
97. Wolf C · J Mater Sci · 2006 · 17 · 1333
98. 10.1002/jor.2051410.1002/jor.20514 ↗
99. 10.1016/j.biomaterials.2008.12.02910.1016/j.biomaterials.2008.12.029 ↗
100. 10.1002/polb.1993.09031011310.1002/polb.1993.090310113 ↗