journal article·2013-07

Analysis of the mechanical deformation arising from investment casting of directionally solidified nickel-based superalloys

C Panwisawas, J-C Gebelin, R C Reed

Materials Science and Technology· Volume 29· Issue 7
Publisher page

Abstract

To provide insight into the factors causing recrystallisation of nickel-based single crystal superalloys, analysis of the thermal–mechanical deformation caused by investment casting of these components is presented. Three-dimensional thermal–mechanical finite element analysis is first used to demonstrate that the reaction of the casting and mould—at least in the aerofoil section—can be approximated as one-dimensional. One-dimensional models are then built based upon static equilibrium for plasticity on the microscale caused by differential thermal contraction of metal, mould and core, using temperature dependent material properties. The models take various forms to study the mechanical response under different situations relevant to practical applications. The results indicate that the plastic strain causing recrystallisation is likely to be induced during cooling at temperatures above 1000°C. The relative importance of thicker and stiffer ceramic shells is studied. Our analysis indicates that it is important to account for creep deformation for such applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Partnership for Research in the Simulation of Manufacturing and Materials (PRISM2), Department of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK

Doncasters Group Ltd, Doncasters Precision Castings - Deritend Ten Acres, Droitwich, Worcester WR9 9BP, UK

Department of Engineering Science, University of Oxford, Parks Road, Oxford OX1 3PJ, UK

References (26)

Show source-provided references
1. 10.1590/S1516-1439200500030000210.1590/S1516-14392005000300002 ↗
2. 10.1016/S0921-5093(97)00424-310.1016/S0921-5093(97)00424-3 ↗
3. 10.1007/s11661-012-1146-010.1007/s11661-012-1146-0 ↗
4. 10.1179/174328408X36932010.1179/174328408X369320 ↗
5. Fletcher AJ: ‘Thermal stress and strain generation in heat treatment’; 1989, Essex, Elsevier Science Publishers Ltd.
6. 10.1179/02670839910150561710.1179/026708399101505617 ↗
7. 10.1179/02670830422501034310.1179/026708304225010343 ↗
8. 10.1179/02670830322501073110.1179/026708303225010731 ↗
9. 10.1007/s11661-010-0251-110.1007/s11661-010-0251-1 ↗
10. 10.1007/s11661-011-0920-810.1007/s11661-011-0920-8 ↗
11. 10.1179/174328406X9116810.1179/174328406X91168 ↗
12. 10.1007/s11661-006-0026-x10.1007/s11661-006-0026-x ↗
13. 10.1016/S0921-5093(99)00701-710.1016/S0921-5093(99)00701-7 ↗
14. 10.1179/02670830422501720110.1179/026708304225017201 ↗
15. 10.1016/j.actamat.2012.09.01310.1016/j.actamat.2012.09.013 ↗
16. Dai HJ, Gebelin J.C, Newell M, Reed RC, D'Souza N, Brown PD, Dong HB: Proc. Superalloys 2008 Conf., Seven Springs, PA, USA, September 2008, The Metals Society, 367–374.10.7449/2008/Superalloys_2008_367_374 ↗
17. Newell M: ‘Aspects of a novel casting process for the production of nickel-based superlloy high pressure turbine blades’, PhD thesis, The University of Birmingham, Birmingham, UK, 2009.
18. Riley KF, Hobson MP, Bence SJ: ‘Mathematical methods for physics and engineering’, 2nd edn; 2003, Cambridge, Cambridge University Press.
19. 10.1299/jsmea.45.9810.1299/jsmea.45.98 ↗
20. 10.1016/S0921-5093(00)01318-610.1016/S0921-5093(00)01318-6 ↗
21. 10.1179/174328408X36145410.1179/174328408X361454 ↗
22. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
23. 10.1016/S0921-5093(00)01829-310.1016/S0921-5093(00)01829-3 ↗
24. Nair SV, Jakus K: ‘High temperature mechanical behavior of ceramic composites’; 1995, Boston, Butterworth-Heinemann.
25. Pabst W · Silikáty · 2004 · 48 · 165
26. 10.1017/CBO978051162310310.1017/CBO9780511623103 ↗