journal article·2009-02

Superalloys in modern power generation applications

T. B. Gibbons

Materials Science and Technology· Volume 25· Issue 2
Publisher page

Abstract

It is widely recognised that for the foreseeable future coal will remain an important energy source for generation of electric power in many areas of the world. However, it will be essential to develop generation technologies that include the capture and storage of emissions such as CO2 to combat the harmful effects of climate change. The key to the successful implementation of advanced generation technologies, the ultimate aim of which is the zero emission power plant, depends heavily on the availability of suitable materials. In this paper, the requirements for materials with improved high temperature performance will be considered in the context of three types of power generation system being developed to operate with greatly reduced emissions and with high levels of efficiency. The limitations of existing materials will be outlined and the need for materials with higher temperature capabilities and good fabricability will be discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. The Future of Coal, MIT Interdisciplinary Report, ISBN 978-0-615-14097-6, 2007.
2. Blum R., and Vanstone R. W.: in ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers et al), 41-60; 2006, Liege, Forschungszentrum Julich GmbH Pubs.
3. Wheeldon J., Dillon D., and Parkes J.: in ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers etal.), 893-915; 2006, Liege, Forschungszentrum Julich GmbH Pubs.
4. Fuduka M., Saito E., Tanaka Y., Shiibashi A., Iwasaki J., Takano S., and Izumi S.: Proc. 5th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Marco Island, FL, October 2007, ASM International.
5. Birks N. ‘Selection of materials for advanced heat exchangers’, Report to Pittsburgh Energy Technology Center, 1995
6. Tschaffon H.: in ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers et al), 61-67; 2006, Liege, Forschungszentrum Julich GmbH Pubs.
7. Viswanathan R., Henry J. F., Tanzosh J., Stanko G., Shingledecker J. P., and Vitalis B.: in ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers et al), 893-915; 2006, Liege, Forschungszentrum Julich GmbH Pubs.
8. Scarlin B., Vanstone R., and Gerdes R.: Proc. 4th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Hilton Head Island, SC, USA, October 2004, ASM International,51–67.10.31399/asm.cp.am-epri-2004p0051 ↗
9. Sato A., Yeh A.C., Kobayashi T., Yokokawa T., Harada H., Murakumo T., and Zhang J: in ‘Materials for advanced power engineering 2006’, (ed. Lecomte-Beckers J. et al), 287–298; 2006, Liege, Forschungszentrum Julich GmbH Pubs.
10. Wenglarz R., and Oakey J.: in ‘Materials for advanced power engineering 2006’, (ed. J. Lecomte-Beckers et al), 233-243; 2006, Liege, Forschungszentrum Julich GmbH Pubs.
11. Energy G. E. ‘Enabling technology for monitoring and predicting gas turbine health and performance in coal IGCC power plants’, Final Report to US Department of Energy, 1 December 2005.
12. 10.1179/mht.2001.01510.1179/mht.2001.015 ↗
13. Onal K., Maria-Sida M. C., Meier G. H., and Petit F. S.: in ‘Superalloys 2004’, (ed.Green K. A. et al), 607-615; 2004, Warrendale, PA, TMS.10.7449/2004/Superalloys_2004_607_615 ↗
14. Pint B. A., Haynes J. A., Zhang Y., Moore K. L., and Wright I. G.: Surface Coat. TechnoL, 2006, to be published.
15. Bohn D.: Modern Power Sys., September 2006, 25–27.
16. Anderson R., Brandt H., Doyle S., and Viteri F.: Proc. 28th Tech. Conf. on ‘Coal utilisation and fuel systems’, Clearwater, FL, USA, March 2003, Coal and Slurry Technology Association.
17. Pronske K. · Proc. GT 2006 ASME Turbo Expo 2006, Power for Land Sea and Air, Barcelona, Spain, May 2006, ASME, · 1
18. 10.1115/1.281629610.1115/1.2816296 ↗