journal article·2004-11

Transition from upper to lower bainite in Fe–C–Cr steel

Z. Ławrynowicz

Materials Science and Technology· Volume 20· Issue 11
Publisher page

Abstract

An analytical evaluation of transition temperature from upper to lower bainite in Fe – 0·38C – 0·93Cr (wt-%) steel was carried out. Calculations were based on the model constructed by Takahashi and Bhadeshia, which involves a comparison between the time t θ needed to precipitate cementite within the bainitic ferrite plates with the time t θ required to decarburise supersaturated ferrite plates. It was found that the distribution of lath widths, shown by histograms, of the bainitic ferrite varies with isothermal transformation temperatures and holding times. The transition between upper and lower bainite is found to occur over a narrow range of temperatures (350 – 410°C) and depends on the thickness of bainitic ferrite laths and the volume fraction of precipitated cementite. On comparing t d and t θ it was found that a transition temperature from upper to lower bainite reaction L S of about 350°C could be predicted if the thickness of bainitic ferrite laths is set as w o = 0·1 μm and the volume fraction of cementite set as ξ = 0·01. Calculated differences in the relative behaviour of t d and t θ revealed the occurrence of upper and lower bainite in steel Fe – 0·38C – 0·93Cr consistent with the results of transmission electron microscopy investigation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering University of Technology and Agriculture, ul. S. Kaliskiego 7, 85 – 796 Bydgoszcz, Poland.

References (57)

Show source-provided references
1. BRAMFITT B. L. and SPEER J. G.: Metall. Trans. A 1990 21A 817–829.10.1007/BF02656565 ↗
2. SINGH U. P. e tal.: Mater. Sci. Technol 2001 17 33–38.10.1179/026708301101509098 ↗
3. BHADESHIA H. K. D. H.: Acta Metall. 1980 28 1103–1114.10.1016/0001-6160(80)90093-0 ↗
4. SPANOS G.: Metall. Mater. Trans. A,1994, 25A, 1967-1980.
5. MATAS S. J. and IIEHEMANN R. F.: Trans. TMS—AIME 1961 221 179–185.
6. SPEICH G. R. and COHEN M.: Trans. TMS—AIME 1960 218 1050— 1059.
7. CHRISTIAN J. W.: Metall Trans. A 1994 25A 1821 — 1839.10.1007/BF02649031 ↗
8. HONEYCOMBE R. W. K.: Metall. Trans. A 1976 7A 915–936.10.1007/BF02644057 ↗
9. BHADESHIA H. K. D. H.: ‘Bainite in steels’ 1992 London The Institute of Materials.
10. AARONSON H. I.: Symposium on the ‘Mechanism of phase transformations in metals’ 47; 1955 London Institute of Metals.
11. 10.1007/BF0267256210.1007/BF02672562 ↗
12. 10.1007/BF0267256010.1007/BF02672560 ↗
13. REYNOLDS W. T., , LI F. Z., , SHUI C. K., and AARONSON H. I.: Metall Trans. A,1990, 21A, 1433-1463.
14. REYNOLDS W. T., , LIU S. K., , LI F. Z., , HARTFIELD S., and AARONSON H. I.: Metall. Trans. A,1990, 21A, 1479-1491.
15. AARONSON H. I. and HALL M. G.: Metall. Mater. Trans. A 1994 25A 1797 — 1819.10.1007/BF02649030 ↗
16. HONEYCOMBE R. W. K.: Metall Trans. A 1976 7A 915–936.10.1007/BF02644057 ↗
17. HONEYCOMBE R. W. K.: Met. Sci 1980 6 201–214.10.1179/030634580790426481 ↗
18. v. OHMORI et al: Mater. Trans. JIM 1993 34 216–223.10.2320/matertrans1989.34.216 ↗
19. mou v. and Hsu T. Y.: Metall. Trans. A 1988 19A 1695–1701.10.1007/BF02645137 ↗
20. v. OHMORI et al.: Metall. Mater. Trans. A 1994 25A 1981–1989.10.1007/BF02649046 ↗
21. BHADESHIA H. K. D. H. and CHRISTIAN J. W.: Metall. Trans. A 1990 21A 767–797.10.1007/BF02656561 ↗
22. HONEYCOMBE R. W. K. and PICKERING F. B.: Metall Trans. 1972 3 1099–1112.10.1007/BF02642441 ↗
23. OHMORI Y.: Scr. Mater. 2002 47 201–206.10.1016/S1359-6462(02)00129-X ↗
24. AARONSON H. I.: in ‘Decomposition of austenite by diffusional processes’ (ed. Zackay V. F. and Aaronson H. I.) 387-548; 1962 New York Interscience.
25. LEE H. I. SPANOS G. SHIFLET G. J. and AARONSON H. I.: Acta Metall. 1988 36 1129–1140.10.1016/0001-6160(88)90166-6 ↗
26. HILLERT M. and PURDY G. R.: Scr. Mater. 2000 43 831–833.10.1016/S1359-6462(00)00484-X ↗
27. AARONSON H. I. SPANOS G. and REYNOLDS W. T.: Scr. Mater. 2002 47 139–144.10.1016/S1359-6462(02)00119-7 ↗
28. SHIFLET G. J. and HACKENBIRG R. E.: Scr. Mater. 2002 47 163–167.10.1016/S1359-6462(02)00123-9 ↗
29. HILLERT M.: Scr. Mater. 2002 47 175–180.10.1016/S1359-6462(02)00125-2 ↗
30. HILLERT M.: Metall. Mater. Trans. A,1994, 25A, 1957-1966.
31. CHRISTIAN J. W.: ‘Theory of transformations in metals and alloys’ 2nd edition Pt.1 1975 Oxford Pergamon Press.
32. AARONSON H. I.: ‘The mechanism of phase transformations in crystalline solids’ 270–281; 1968 London The Institute of Metals.
33. MATAS S. J. and HEFIEMANN R. F.: Trans. TMS—AIME 1961 221 179— 185.
34. TAKAHASHI M. and BHADESHIA H. K. D. H.: Mater. Sci. Technol 1990 6 592 — 603.10.1179/026708390790191521 ↗
35. BHADESHIA H. K. D. H.: Acta Metall. 1981 29 1117–1130.10.1016/0001-6160(81)90063-8 ↗
36. BHADESHIA H. K. D. H.: Met. Sci. 1982 16 159— 165.10.3109/03005368209081493 ↗
37. LAWRYNOWICZ z.: Int. J. Eng. 1999 12 81–86.10.1097/00001504-199901000-00022 ↗
38. LAWRYNOWICZ z.: Mater. Sci Technol 2002 18 1322–1324.10.1179/026708302225007259 ↗
39. BHADESHIA H. K. D. H. DAVID S. A. VITEK J. M. and REED R. W.: Mater. Sci Technol 1991 7 686–698.10.1179/026708391790184915 ↗
40. DYSON D. J. and HOLMES B.: J. Iron Steel Inst. 1970 277 469.
41. BABU S. S. and BHADESHIA H. K. D. H.: Mater. Sci. Technol 1990 6 1005.10.1179/mst.1990.6.10.1005 ↗
42. BHADESHIA H. K. D. H. and EDMONDS D. V.: Acta Metall. 1980 28 1265–1273.10.1016/0001-6160(80)90082-6 ↗
43. CHANG L. C. and BHADESHIA H. K. D. H.: Mater. Sci. Technol 1995 11 874–881.10.1179/026708395790165462 ↗
44. HULTGREN A.: Jernkontores Ann. 1951 135 p. 403.10.1515/9783112412169-020 ↗
45. KO T. and COTTRELL S. A.: J. Iron Steel Inst. 1952 172 307–313.
46. CHRISTIAN J. W.: ‘Theory of transformations in metals and alloys’ 778; 1965 Oxford Pergamon Press.
47. BHADESHIA H. K. D. H.: Met. Sci. 1982 16 167— 169.10.1179/030634582790427244 ↗
48. BHADESHIA H. K. D. H. and EDMONDS D. V.: Acta Metall. 1980 28 1265–1273.10.1016/0001-6160(80)90082-6 ↗
49. MCLELLAN R. B. and DUNN W. W.: J. Phys. Chem. Solids. 1969 30 2631.10.1016/0022-3697(69)90271-6 ↗
50. DUNN w. W., and MCLELLAN R. B.: Metall. Trans.,1970, 1, 1263-1265.
51. TAKAHASHI M. and BHADESHIA H. K. D. H.: Mater. Trans. JIM 1991 32 689–696.10.2320/matertrans1989.32.689 ↗
52. CHANG L. C.: ‘Bainite transformation and novel bainitic rail steels’ PhD thesis Cambridge 1995.
53. SPEICH G. R.: Trans. AIME,1969, 245, 2553-2564.
54. LAWRYNOWICZ z.: Unpublished research University of Tech-nology and Agriculture Bydgoszcz 2002.
55. TRIVEDI R. and POUND G. M.: J. Appl. Phys. 1967 38 35-69— 3576.10.1063/1.1710174 ↗
56. BHADESHIA H. K. D. H.: Met. Sci. 1981 15 477–479.10.1016/S0090-3019(81)80045-6 ↗
57. PARKER E. R.: Metall. Trans.,1977, 8A, 1025-1042.