journal article·2017-05

Improved properties of friction stir-welded AZ31 magnesium alloy by post-weld heat treatment

G. Wang, Z. Yan, H. Zhang, X. Zhang, F. Liu, X. Wang, Y. Su

Materials Science and Technology· Volume 33· Issue 7
Publisher page

Abstract

Mechanical properties and microstructure of friction stir-welded AZ31 based on variety post-weld heat treatment (PWHT) temperatures were evaluated, and an optimal PWHT condition was identified. At rotational speed of 1200 rev min −1 and welding speed of 300 mm min −1 , the average yield tensile, tensile strength and elongation of friction stir-welded joints was 92.5 MPa, 199.1 MPa and 7.3%, respectively. It was found that (300°C – 1 h) heat treatment after welding was more beneficial than other heat treatments in enhancing the mechanical properties and homogenising grain size. The maximum yield and tensile strength was 139.9 and 238.4 MPa, respectively, tensile longitudinal and compressive transverse residual stress could be effectively eliminated, and the fatigue strength increased 34.2% comparing with as-welded joints.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering, Taiyuan University of Technology, 79# West Yingze Street, Taiyuan 030024, PR China

Shanxi Key Laboratory of Advanced Magnesium-Based Materials, Taiyuan University of Technology, 79# West Yingze Street, Taiyuan 030024, PR China

Funding

Natural Science Foundation Project of China

References (36)

Show source-provided references
1. 10.1007/s00170-007-1279-210.1007/s00170-007-1279-2 ↗
2. 10.1016/j.matdes.2012.01.00510.1016/j.matdes.2012.01.005 ↗
3. 10.1016/S1003-6326(10)60531-610.1016/S1003-6326(10)60531-6 ↗
4. 10.1016/j.ijfatigue.2009.02.03410.1016/j.ijfatigue.2009.02.034 ↗
5. Thomas W. M., Nicholas E. D., Needham J. C., Church M. G., Templesmith P., and Dawes C. J. ‘Friction stir butt welding’, GB Patent Application No. 9125978.9, 1991.
6. 10.1016/j.matdes.2012.06.01810.1016/j.matdes.2012.06.018 ↗
7. 10.1007/s10853-005-0640-910.1007/s10853-005-0640-9 ↗
8. 10.1007/s10853-009-3735-x10.1007/s10853-009-3735-x ↗
9. 10.1016/j.matdes.2009.11.03010.1016/j.matdes.2009.11.030 ↗
10. Xu W. · Mech. Sci. Technol. Aerospace Eng. · 2008 · 27 · 1159
11. 10.1115/1.48277210.1115/1.482772 ↗
12. Shaofan C. ‘Steel structure design principle’, 56–57; 2005, Beijing: Science Press.
13. 10.1016/j.msea.2007.06.02510.1016/j.msea.2007.06.025 ↗
14. 10.1179/174328406X7929810.1179/174328406X79298 ↗
15. 10.1179/026708306X8151310.1179/026708306X81513 ↗
16. 10.1023/A:101370110402910.1023/A:1013701104029 ↗
17. 10.1016/j.matchar.2007.09.00610.1016/j.matchar.2007.09.006 ↗
18. Guo W. · Rare Met. Mater. Eng. · 2011 · 40 · 1075
19. 10.2320/matertrans.48.4410.2320/matertrans.48.44 ↗
20. Chen Z. · 2005
21. GB/T 228-2002. Metallic materials-tensile testing at ambient temperature, 2002.
22. ASTM E837-95. Standard test method for determining residual stresses by the hole-drilling strain-gage method, 1997.
23. Peng C. · Spec. Cast. Nonferrous Alloys · 2006 · 26 · 661
24. 10.1016/j.msea.2005.12.00310.1016/j.msea.2005.12.003 ↗
25. Zhang Z. · Hot Work. Technol. · 2006 · 35 · 57
26. Ashby M. F., and Jones D. R. H. ‘Engineering materials’, Vol. 1, 105; 1980, Oxford, Pergamon Press.
27. 10.1088/0370-1301/64/9/30210.1088/0370-1301/64/9/302 ↗
28. Petch N. J. · J. Iron. Steel. Inst. · 1953 · 174 · 25
29. 10.1080/18811248.1965.973222810.1080/18811248.1965.9732228 ↗
30. 10.1179/1743284714Y.000000066210.1179/1743284714Y.0000000662 ↗
31. 10.1016/j.matdes.2008.08.03410.1016/j.matdes.2008.08.034 ↗
32. 10.1016/j.matchar.2012.02.02310.1016/j.matchar.2012.02.023 ↗
33. 10.1007/s11663-015-0338-610.1007/s11663-015-0338-6 ↗
34. 10.1007/s00170-011-3210-010.1007/s00170-011-3210-0 ↗
35. 10.1016/j.msea.2012.05.02110.1016/j.msea.2012.05.021 ↗
36. 10.1016/j.msea.2006.06.11710.1016/j.msea.2006.06.117 ↗