journal article·2007-07

Melt flow velocity in high pressure die casting: Its effect on microstructure and mechanical properties in an Al–Si alloy

D. R. Gunasegaram, B. R. Finnin, F. B. Polivka

Materials Science and Technology· Volume 23· Issue 7
Publisher page

Abstract

Analysis of as cast tensile specimens of Australian alloy CA313 (an equivalent of A380) made using the high pressure die casting process at three different melt flow velocities has revealed that increasing melt velocity resulted in a finer microstructure and a reduced pore volume fraction and, consequently, better mechanical properties. Mechanical properties are shown to increase more than proportionately with reducing pore volume fraction and the reason for this is demonstrated to be the contribution from the more refined microstructure. The gate used in the investigation was unusual in that its geometry encouraged and prolonged the shearing of the melt. It is proposed that the microstructure was refined by flow shear, the rate of which increased with melt velocity and consequently enhanced the fragmentation of the externally solidified α-Al grains and inclusions such as oxides, cold flakes and gas bubbles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. 10.1016/S1471-5317(00)00008-010.1016/S1471-5317(00)00008-0 ↗
2. Wang Q. G., Crepeau P. N., Griffiths J. R., and Davidson C. J.: in ‘Shape casting: the John Campbell Symposium’, (ed.Tiryakioglu M., and Crepeau P. N.), 205-214; 2005, San Francisco, CA, The Minerals, Metals and Materials Society.
3. Vinarcik E. J. ‘High integrity die casting processes’, 5-11; 2003, Hoboken, NJ, John Wiley and Sons.
4. Apelian D., and Makhlouf M. M. ‘High integrity aluminium die casting: alloys, processes, and melt preparation’, 1-14; 2004, Rosemont, IL, North American Die Casting Association.
5. 10.1179/174328405X5182010.1179/174328405X51820 ↗
6. Fan Z.: Proc. 9th Int. Conf. on ‘Aluminium alloys’, Brisbane, Australia, August 2004, Institute of Materials Engineering Australasia Ltd,1092–1097.
7. Karban R. · 2000
8. 10.1016/0924-0136(94)01583-M10.1016/0924-0136(94)01583-M ↗
9. Ghomashchi R.: in ‘Materials forum’, (ed. Nie J. F.), Vol. 28, 1290-1296; 2004, Melbourne, Institute of Materials Engineering Australasia Ltd.
10. 10.1080/13640461.1998.1181926410.1080/13640461.1998.11819264 ↗
11. Davis A. J., and Robinson P. M.: Proc. Conf., Detroit, MI, USA, March 1975, Society of Die Casting Engineers, Paper No. G-T75-122.
12. Herman E. A. ‘Gating die casting dies’, 1-3 and 73-93; 1995, Rosemont, IL, North American Die Casting Association.
13. Pitsaris C., Savage G., and Abbott T.: Proc. 22nd NADCA International Die Casting Cong., Indianapolis, IN, USA, September 2003, North American Die Casting Association,195–203.
14. Kittel-Sherri T. · 2001
15. Klein F.: Proc. 51st Annual World Magnesium Conf., Berlin, Germany, May 1994, International Magnesium Association (USA),35–43.
16. Robinson P. M. · Metall Forum · 1978 · 1 · 26
17. O'Donnell R. · Die Cast. Eng · 2005 · 49 · 43
18. Gunasegaram D. R. · Proc. 13th Conf. on ‘Die casting’
19. Sully L. J. D.: in ‘Metals handbook’, (ed.Davis J. R. et al),Vol. 15, 286-295; 1988, Materials Park, OH, American Society for Metals.
20. Rogers K., and Savage G.: Proc. 21st NADCA International Die Casting Cong., Indianapolis, IN, USA, October—November 2001, North American Die Casting Association,293–297.
21. 10.1080/13640461.2003.1181961710.1080/13640461.2003.11819617 ↗
22. Anon. ‘Aluminium standards and data — ingots and castings’, 35; 1997, Canberra, Australian Die Casting Association.
23. In ‘Annual Book of ASTM Standards’, Vol. 02.02, ‘Standard methods of tension testing wrought and cast aluminum and magnesium alloy products’, ASTM Standard B 557M-02a, West Conshohocken, PA, USA, (Appendix) 448, 2003.
24. 10.1016/S0921-5093(96)10433-010.1016/S0921-5093(96)10433-0 ↗
25. Kaufman J. G, and Rooy E. L. ‘Aluminium alloy castings — properties, processes and applications’, 29-31, 35 and 51-52; 2005, Materials Park, OH, ASM International.
26. 10.1080/13640461.1998.1181926710.1080/13640461.1998.11819267 ↗