Microstructure and microhardness of carbon nanotube reinforced copper nanocomposites
Source abstract
Abstract
Multiwalled carbon nanotube (MWCNT) reinforced copper matrix nanocomposites were fabricated by powder metallurgy technique, which consists of blending, compaction and sintering followed by hot forging technique. The microhardness of hot forged nanocomposites was evaluated and found to be higher than that of hot forged copper. The enhanced hardness was attributed to the hardening of the copper matrix by reinforcing effect of MWCNTs. Electron diffraction patterns obtained from MWCNTs and nanocomposites were indexed, and an orientation relationship was derived using stereographic projection. The orientation relationship between MWCNTs and copper appears to be [[Formula: see text] ]fcc Cu||[[Formula: see text] ]MWCNT, and tube axis was found to be parallel to (3 1 1)Cu. However, no unique orientation relationship was observed between copper and MWCNTs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Nanocomposites Research, Department of Mechanical Engineering, P E S Institute of Technology, Bangalore 560 085, India
Jawaharlal Nehru Technological University Hyderabad, Kukatpally, Hyderabad 500 085, India
Department of Electrical and Electronics Engineering, B V Bhommaraddi College of Engineering and Technology, Hubli 580 023, India
References (20)
Show source-provided references
1. 10.1002/352760811710.1002/3527608117 ↗
2. 10.1103/PhysRevLett.79.129710.1103/PhysRevLett.79.1297 ↗
3. 10.1126/science.277.5334.197110.1126/science.277.5334.1971 ↗
4. 10.1126/science.106699610.1126/science.1066996 ↗
5. 10.1007/s12034-008-0032-210.1007/s12034-008-0032-2 ↗
6. 10.1016/j.surfcoat.2008.05.04210.1016/j.surfcoat.2008.05.042 ↗
7. 10.1016/j.compositesa.2009.02.00710.1016/j.compositesa.2009.02.007 ↗
8. 10.1016/j.jallcom.2011.04.08310.1016/j.jallcom.2011.04.083 ↗
9. 10.1016/j.scriptamat.2010.09.03910.1016/j.scriptamat.2010.09.039 ↗
10. 10.1016/j.jallcom.2012.09.07310.1016/j.jallcom.2012.09.073 ↗
11. Aniruddha Ram HR · Mater. Sci. Eng. A · 2013 · 559 · 92010.1016/j.msea.2012.08.143 ↗
12. 10.1016/j.msea.2011.02.06610.1016/j.msea.2011.02.066 ↗
13. 10.1126/science.265.5180.185010.1126/science.265.5180.1850 ↗
14. 10.1088/0034-4885/62/11/20110.1088/0034-4885/62/11/201 ↗
15. 10.1016/j.jallcom.2009.03.05510.1016/j.jallcom.2009.03.055 ↗
16. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
17. 10.1016/0025-5416(86)90261-210.1016/0025-5416(86)90261-2 ↗
18. Hull D, Bacon DJ: ‘Introduction to dislocations’, 4th edn; 2009, India, Elsevier Butterworth Heinemann.
19. Cullity BD, StockSR: ‘Elements of X-ray diffraction’; 2001, Upper Saddle River, Prentice Hall.
20. Fultz B, Howe J: ‘Transmission electron microscopy and diffractometry of materials’, 3rd edn; 2008, Berlin, Springer-Verlag.