journal article·2016-05Open access

Effect of gaseous hydrogen charging on the tensile properties of standard and medium Mn X70 pipeline steels

D. Hejazi, A. Calka, D. Dunne, E. Pereloma

Materials Science and Technology· Volume 32· Issue 7

Abstract

The tensile properties of two X70 steels with high (1.14 wt-) and medium (0.5 wt-) Mn contents have been investigated by testing at 25°C of tubular specimens charged with an internal gas pressure of 10 MPa of hydrogen or argon. The hydrogen-charged samples were additionally tested at 50 and 100°C. Tensile testing showed that the equiaxed ferrite–pearlite microstructure of higher Mn steel was most sensitive to hydrogen embrittlement and that the banded ferrite–pearlite microstructure of the higher Mn strip was more susceptible to hydrogen embrittlement than the medium Mn strip. The more highly banded ferrite–pearlite microstructure in the higher Mn steel provided numerous sites for concentration of hydrogen to levels that promoted crack initiation and growth. Test temperatures up to 100°C reduced the yield and tensile strengths, increased the total elongation and decreased the extent of hydrogen embrittlement because of enhanced dislocation mobility and less effective hydrogen trapping.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical, Materials and Mechatronics Engineering, University of Wollongong, NSW 2522, Australia

Funding

Austtralian Research Council

References (37)

Show source-provided references
1. Williams J. G. · Mater. Forum · 2007 · 31 · 1
2. 10.1016/j.jallcom.2009.05.08510.1016/j.jallcom.2009.05.085 ↗
3. 10.1016/j.msea.2010.07.02210.1016/j.msea.2010.07.022 ↗
4. 10.1016/j.ijhydene.2009.09.09010.1016/j.ijhydene.2009.09.090 ↗
5. 10.1016/S0254-0584(03)00084-110.1016/S0254-0584(03)00084-1 ↗
6. 10.1016/S0921-5093(03)00217-X10.1016/S0921-5093(03)00217-X ↗
7. 10.1007/978-1-4615-9065-1_210.1007/978-1-4615-9065-1_2 ↗
8. 10.1016/j.ijhydene.2011.06.14010.1016/j.ijhydene.2011.06.140 ↗
9. 10.2355/isijinternational1966.19.40110.2355/isijinternational1966.19.401 ↗
10. 10.1016/j.matchemphys.2007.07.00410.1016/j.matchemphys.2007.07.004 ↗
11. Williams J. G. · 2008
12. Williams R. S., and Homerberg V. O. ‘Principles of metallography’, Metallurgy and metallurgical engineering series, 319; 1948, New York, McGraw-Hill Book Co., Inc.
13. ASTM E562-11 ‘Standard test method for determining volume fraction by systematic manual point count’ in Book of Standards, 03.01, 2011, West Conshohocken, PA, ASTM International.
14. ASTM E112-10 ‘Standard test methods for determining average grain size’, 2010, West Conshohocken, PA, ASTM International.
15. 10.1016/j.ijhydene.2012.05.00510.1016/j.ijhydene.2012.05.005 ↗
16. Al Shahrani A. · Mater. Sci. Forum · 2010 · 654 · 98
17. 10.1007/s11661-005-0331-910.1007/s11661-005-0331-9 ↗
18. Dieter G. E. · 1986
19. 10.1016/S0921-5093(01)01217-510.1016/S0921-5093(01)01217-5 ↗
20. 10.1016/j.ijhydene.2009.10.05010.1016/j.ijhydene.2009.10.050 ↗
21. 10.1016/j.scriptamat.2007.08.00110.1016/j.scriptamat.2007.08.001 ↗
22. 10.1016/j.msea.2006.08.05110.1016/j.msea.2006.08.051 ↗
23. Hofmann W. · Welding J., Res. Suppl. · 1965 · 44
24. 10.1007/s11661-004-0256-810.1007/s11661-004-0256-8 ↗
25. 10.1016/j.corsci.2008.09.02510.1016/j.corsci.2008.09.025 ↗
26. 10.1007/BF0265193710.1007/BF02651937 ↗
27. 10.1016/j.msea.2012.04.07610.1016/j.msea.2012.04.076 ↗
28. 10.1007/s12540-011-0614-110.1007/s12540-011-0614-1 ↗
29. 10.1016/j.ijhydene.2012.11.12710.1016/j.ijhydene.2012.11.127 ↗
30. Beachem C. D. · Metall. Trans. A · 1972 · 3 · 437
31. 10.1016/j.corsci.2008.02.02410.1016/j.corsci.2008.02.024 ↗
32. 10.1007/BF0281491410.1007/BF02814914 ↗
33. Grong O. ‘Metallurgical modelling of welding’ Materials Modelling Series, 509–512; 1994, London, The Institute of Materials.
34. 10.1016/j.corsci.2006.02.01110.1016/j.corsci.2006.02.011 ↗
35. 10.1016/0921-5093(91)90658-A10.1016/0921-5093(91)90658-A ↗
36. 10.1016/S0167-577X(96)00140-110.1016/S0167-577X(96)00140-1 ↗
37. 10.1016/S0010-938X(00)00084-610.1016/S0010-938X(00)00084-6 ↗