On anisotropy of ferritic ODS alloys
Source abstract
Abstract
Ferritic oxide dispersion strengthened (ODS) alloys are candidate materials to be used as cladding for long term fast reactors, due to their high strength at high temperature and good swelling and irradiation resistances. The fabrication of cladding tubes is usually made by a succession of cold deformation steps where a deformation induced anisotropic microstructure could take place, which would affect the mechanical behaviour of the tube. The characterisation of this microstructural anisotropy is one of the key issues in the development of cladding ODS tubes. In this paper, the microstructural anisotropy of a Fe–14Cr–ODS extruded bar and a Fe–12Cr–ODS plate is characterised and its effect on the mechanical properties is analysed by tensile, impact and small punch testing. In both materials, a reduction of the ductility is observed in the transverse specimens. In addition, the fracture behaviour seems to be strongly dependent on the location of the crack plane regarding the elongated grained microstructure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Structural Materials Division, CIEMAT, Avda Complutense 40, 28040 Madrid, Spain
References (24)
Show source-provided references
1. 10.1016/j.jnucmat.2008.11.02610.1016/j.jnucmat.2008.11.026 ↗
2. de Carlan Y and Ribis J: ‘Nuclear ODS alloys: Fabrication route, microstructure and mechanical properties’, Proc. 8th European Conf. on ‘Euratom research and training in reactor systems’, Vilnius, Lithuania, October 2013, FISA, the European Commission and the Lithuanian Presidency of the EU.
3. 10.1016/j.jnucmat.2011.10.03710.1016/j.jnucmat.2011.10.037 ↗
4. 10.1016/j.jnucmat.2004.04.08210.1016/j.jnucmat.2004.04.082 ↗
5. 10.1016/j.jnucmat.2013.04.05210.1016/j.jnucmat.2013.04.052 ↗
6. S. Ukai and M. Fujiwara: ‘Perspective of ODS alloys application in nuclear environments’, J. Nucl. Mater., 2002, 307, 749–757.10.1016/S0022-3115(02)01043-7 ↗
7. A. Alamo, V. Lambard, X. Averty and M. H. Mathon: ‘Assessment of ODS�14 Cr ferritic alloy for high temperature applications’, J. Nucl. Mater., 2004, 329, 333–337.10.1016/j.jnucmat.2004.05.004 ↗
8. H. Y. Kim, O. Y. Kwon, Jinsung Jang and S. H. Hong: ‘Modification of anisotropic mechanical properties in recrystallized oxide dispersion strengthened ferritic alloy’, Scr. Mater., 2006, 54, 1703–1707.10.1016/j.scriptamat.2005.12.033 ↗
9. Logé RE, L. Toualbi, E. Vanegas-Marques, Y. de Carlan and K. Mocellin: ‘Optimization of the fabrication route of ferritic/martensitic ODS cladding tubes: metallurgical approach and pilgering numerical modeling’, Proc. IAEA Int. Conf. on ‘Fast reactors and related fuel cycles’: ‘Safe technologies and sustainable scenarios (FR13)’, Paris, France, March 2013, IAEA.
10. 10.1016/j.jnucmat.2012.05.04810.1016/j.jnucmat.2012.05.048 ↗
11. 10.1016/j.jnucmat.2012.03.01610.1016/j.jnucmat.2012.03.016 ↗
12. 10.1016/j.jnucmat.2010.12.06910.1016/j.jnucmat.2010.12.069 ↗
13. 10.1080/18811248.1996.973203510.1080/18811248.1996.9732035 ↗
14. 10.1016/j.jnucmat.2011.08.01610.1016/j.jnucmat.2011.08.016 ↗
15. Joo MS: ‘Anisotropy of Charpy properties in linepipe steel’, PhD thesis, Pohang University of Science and Technology, Pohang, Korea, 2012.
16. Serrano M, de Carlan Y, Lindau R, Muller G, Blat M, Chaouadi R and Delabrouille F: ‘ODS fabrication, basic characterization and thermal stability’, Proc. Getmat Workshop, Berlin, Germany, September 2013, Getmat, http://nuklear-server.nuklear.kit.edu/getmat/.
17. de Carlan Y: ‘Production and characterisation of 14Cr1WYTi ferritic ODS’, Getmat Deliverable D1·2, June 2005.
18. Muller G: ‘Supply and characterization of 12CrODS’, Getmat Deliverable D1·13, June 2005.
19. ‘Standard test method for plane-strain fracture toughness of metallic materials’, ASTM E3999, ASTM International, West Conshohocken, PA, USA, 2012.
20. 10.1016/j.msea.2012.07.05110.1016/j.msea.2012.07.051 ↗
21. 10.1016/j.jnucmat.2011.10.04610.1016/j.jnucmat.2011.10.046 ↗
22. 10.1007/s11661-013-1815-710.1007/s11661-013-1815-7 ↗
23. 10.1016/j.engfracmech.2009.06.01010.1016/j.engfracmech.2009.06.010 ↗
24. 10.1016/j.jnucmat.2008.12.26510.1016/j.jnucmat.2008.12.265 ↗