journal article·2010-04

Martensitic steels with carbide free microstructures containing retained austenite

D. V. Edmonds, J. G. Speer

Materials Science and Technology· Volume 26· Issue 4
Publisher page

Abstract

The concept of employing martensitic microstructures containing controlled quantities of carbon enriched retained austenite as a new route to high tonnage steels with improved properties is developed through an introduction to the novel non-equilibrium heat treatment procedure which has become known as quenching and partitioning (Q&P). This builds upon the earlier development of steels containing carbide free bainite and retained austenite, enabled by alloying with Si to suppress carbide precipitation, embracing a philosophy to produce refined ferritic microstructures by transformation to acicular forms, with the ferrite protected from the more damaging effects of carbon, which is partitioned to the austenite phase where it acts as a chemical stabiliser. This route offers enhanced strength from the martensite structure along with the promise of new properties from the behaviour of the retained austenite phase which could potentially contain a very high controlled concentration of carbon.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Materials ResearchUniversity of Leeds, Leeds, LS2 9JT, UK

Advanced Steel Processing and Products Research Centre, Colorado School of Mines, Golden, CO 80401, USA

References (71)

Show source-provided references
1. Woodhead J. H., and Keown S. R.: in ‘HSLA steels-metallurgy and applications’, (ed.Gray J. M.), 15; 1986, Metals Park, OH, American Society for Metals.
2. Gladman T. ‘The physical metallurgy of microalloyed steels’; 1997, London, Institute of Materials.
3. Edmonds D. V.: in ‘Handbook of mechanical alloy design’, (ed.Totten G. E. et al), 321; 2004, New York, Marcel Dekker.
4. Garland D. G. · Met. Constr · 1975 · 7 · 275
5. Abson D. J., Dolby R. E., and Hart P. H. M. ‘Trends in steels and consumables for welding’, 75; 1979, Abington, TWI.
6. Ito Y. · Sumitomo Search · 1976 · 15 · 42
7. Barritte G. S., and Edmonds D. V. ‘Advances in the physical metallurgy and applications of steels’, 126; 1982, London, The Metals Society.
8. Yamamoto K. in ‘Residual and unspecified elements in steel’, (ed. Melilli A. S., and Nisbett E. G.), 266; 1989, Philadelphia, PA, ASTM.
9. Nishioka K., Tamehiro H., and Murata M.: US patent 4,851,052, 1989.
10. Madariaga I. · Mater. Sci. Forum · 1995 · 284 · 419
11. 10.1179/02670830122500074310.1179/026708301225000743 ↗
12. Matas S. · Trans. AIME · 1961 · 221 · 176
13. Oblak J. P., and Hehemann R. F. ‘Transformations and hardenability in steels’, 15; 1967, Ann Arbor, MI, Climax Molybdenum Co.
14. Hehemann R. F. ‘Phase transformations’, 397; 1970, Metals Park, OH, ASM.
15. Hehemann R. F., Kinsman K. R., and Aaronson H. I.: Metall Trans. 1972, 3, 1077.10.1007/BF02642439 ↗
16. 10.1007/BF0265830910.1007/BF02658309 ↗
17. Bhadeshia H. K. D. H., and Edmonds D. V.: Acta Metall. 1980,28, 1265.10.1016/0001-6160(80)90082-6 ↗
18. Christian J. W., and Edmonds D. V.: in ‘Phase transformations in ferrous alloys’, (ed. Marder A. R., and Goldstein J. I.), 293; 1984, Warrendale, PA, AIME.
19. Bhadeshia H. K. D. H. ‘Bainite in steels’, 2nd edn, 240; 2001, London, IOM Communications.
20. 10.1179/03063458379042060010.1179/030634583790420600 ↗
21. 10.1179/03063458379042064610.1179/030634583790420646 ↗
22. 10.1179/mst.1987.3.6.42210.1179/mst.1987.3.6.422 ↗
23. 10.1179/mst.1987.3.6.43210.1179/mst.1987.3.6.432 ↗
24. 10.1179/mst.1987.3.6.44110.1179/mst.1987.3.6.441 ↗
25. Bhadeshia H. K. D. H.: in ‘Future developments of metals and ceramics’, (ed.Charles J. A. et al), 25; 1992, London, Institute of Materials.
26. Yates J. K.: Sci Parham. 1996, 53, 2.10.1017/S0308229600030269 ↗
27. 10.1179/02670830122500072510.1179/026708301225000725 ↗
28. Garcia-Mateo C. · J. de Phys. Coll · 2003 · 112 · 285
29. Garcia-Mateo C., Caballero F. G., and Bhadeshia H. K. D. H.: ISIJ Int. 2003, 43, 1238.10.2355/isijinternational.43.1238 ↗
30. 10.1179/02670830110151035710.1179/026708301101510357 ↗
31. Bhadeshia H. K. D. H.: in ‘New developments on metallurgy and applications of high strength steels’, (ed. Perez T.), 3; 2009, Warrendale, PA, TMS.
32. 10.1179/03063458279042731610.1179/030634582790427316 ↗
33. 10.1016/0036-9748(87)90103-710.1016/0036-9748(87)90103-7 ↗
34. 10.2355/isijinternational1966.27.57010.2355/isijinternational1966.27.570 ↗
35. 10.1007/s11661-998-0114-110.1007/s11661-998-0114-1 ↗
36. Girault E., Jacques P., Ratchev P., van Humbeeck J., Verlinden B., and Aernoudt E.: Mater. Set Eng. A, 1999, A273, 471.10.1016/S0921-5093(99)00330-5 ↗
37. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
38. Speer J. G., Matlock D. K., de Cooman B. C., and Schroth J. G.: Acta Mater. 2003, 51, 2611.10.1016/S1359-6454(03)00059-4 ↗
39. Speer J. G., Streicher A. M., Matlock D. K., Rizzo F. C., and Krauss G.: in Austenite formation and decomposition’, (ed.Damm E.B., and Merwin M.), 505; 2003, Warrendale, PA, TMS/ISS.
40. Matlock D. K., Brautigam V. E., and Speer J. G.: in ‘THERMEC 2003’, 1089; 2003, Uetikon-Zurich, Trans. Tech. Publications.
41. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
42. 10.1016/j.scriptamat.2003.11.02010.1016/j.scriptamat.2003.11.020 ↗
43. 10.1016/j.scriptamat.2004.08.02910.1016/j.scriptamat.2004.08.029 ↗
44. 10.1016/j.scriptamat.2004.08.02610.1016/j.scriptamat.2004.08.026 ↗
45. Krauss G. ‘Steels: heat treatment and processing principles’; 1990, Metals Park, OH, ASM International.
46. Zhong N. · J. Mater. Set Technol · 2006 · 22 · 751
47. Kim S. J., Kim H. S., and de Cooman B. C.: in ‘Materials science and technology’, 73; 2007, Metals Park, OH, ASM International.
48. Kim S. J., Speer J. G., Kim H. S., and de Cooman B. C. ‘New developments in advanced high-strength sheet steels’, 179; 2008, Warrendale, PA, AIST.
49. 10.1080/0950083070119417310.1080/09500830701194173 ↗
50. 10.1016/j.scriptamat.2008.02.04510.1016/j.scriptamat.2008.02.045 ↗
51. Bhadeshia H. K. D. H.: Acta Metall. 1980, 28, 1103.10.1016/0001-6160(80)90093-0 ↗
52. 10.1361/10549710077034005710.1361/105497100770340057 ↗
53. Rizzo F. C., Edmonds D. V., He K., Speer J. G., and Matlock D. K.: in ‘Solid-solid phase transformations in inorganic materials’, (ed.Howe J. M. et al); 2005, Warrendale, PA, TMS.
54. Edmonds D. V., He K., Rizzo F. C., Clarke A., Matlock D. K., and Speer J. G.: in ‘Super-high strength steels’; 2005, Rome, Associazione Italiana di Metallurgia and Centro Sviluppo Materiali, CD-ROM - ISBN 88-85298-56-7.
55. Clarke A., Speer J. G., Matlock D. K., Rizzo F. C., Edmonds D. V., and He K.: in ‘Solid-solid phase transformations in inorganic materials’, (ed.Howe J. et al), 99; 2005, Warrendale, PA, TMS.
56. Gerdemann F. L. H. · 2004
57. 10.1590/S1516-1439200500040001010.1590/S1516-14392005000400010 ↗
58. de Moor E., Lacroix S., Samek L., Penning J., and Speer J. G. ‘Advanced structural steels’; 2006, Gyeongju, Korea.
59. de Moor E. · 2009
60. Bigg T.: University of Leeds, Leeds, UK, unpublished research, 2009.
61. Edmonds D. V., He K., Rizzo F. C., de Cooman B. C., Matlock D. K., and Speer J. G.: Mater. Sci. Eng. A, 2002, A438—A440, 25.10.1016/j.msea.2006.02.133 ↗
62. Edmonds D. V., He K., Miller M. K., Rizzo F. C., Clarke A., Matlock D. K., and Speer J. G.: Mater. Sci. Forum, 2007, 539-543, 4819.10.4028/www.scientific.net/MSF.539-543.4819 ↗
63. Edmonds D. V., He K., Rizzo F. C., Speer J. G., and Matlock D. K.: in ‘New developments on metallurgy and applications of high strength steels’, (ed. Perez T.), 829; 2009, Warrendale, PA, TMS.
64. He K., Edmonds D. V., Speer J. G., Matlock D. K., and Rizzo F. C.: Proc. 14th Eur. Microscopy Cong. (ed.Richter S., and Schwedt A.), Vol. 2, ‘Materials science’, 429; 2008, Berlin, Springer.
65. Speer J. G., Shutts A. J., Matlock D. K., Edmonds D. V., Rizzo F., and Damm E. B. ‘New developments in long and forged products: metallurgy and applications’, 191; 2006, Warrendale, PA, AIST.
66. Krauss G.: Colorado School of Mines, Golden, USA, private communication, 2009.
67. Clarke A. J. · 2006
68. Matlock D. K., and Speer J. G. ‘Structural steels’, (ed.Lee H. C.), 774; 2006, Seoul, Korean Institute of Metals and Materials.
69. 10.1002/srin.20060644110.1002/srin.200606441 ↗
70. Hong S. C. · Met. Mater · 2007 · 13 · 439
71. Thomas G. A., Speer J. G., and Matlock D. K. ‘New developments in advanced high-strength sheet steels’, 227; 2008, Warrendale, PA, AIST.