journal article·1986-01

Comparison between use of TiN-coated and uncoated high-speed steel and fine-grained cemented carbide tools in cutting of resulphurized 0·08 wt-%C free-cutting steel

R. Milovic, E.F. Smart, M.L.H. Wise

Publisher page

Abstract

A free-cutting 0·08%C steel has been turned dry using uncoated fine–grained cemented carbide tools and both uncoated and TiN-coated (by chemical vapour deposition)T 42 high-speed steel tools. Temperature estimates from the high–speed steel tools show that coating reduces the maximum rake-face temperature by about 125 K over a range of cutting speeds, permitting higher cutting speeds to be used before the onset of cratering. The wear mechanisms and built-up-edge behaviour have been investigated in terms of the tool/chip interface temperature and the relative plasticity of MnS inclusions. Manganese sulphide seems to have a higher affinity for the TiN coating than for the uncoated tools, permitting easier interfacial shear, and reducing contact area and built-up-edge size. With coated tools a built-up cap of workpiece material forms over the cutting edge, protecting it from wear; as a result there is only a small initial improvement in surface finish, but since nose wear is reduced, surface finish is maintained over a longer cutting period than with uncoated tools.MST/212
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. E. M. TRENT: ‘Metal cutting’, 2 edn, 1984, London, Butterworths.10.1016/B978-0-408-05031-9.50009-0 ↗
2. K. J. A. BROOKES: ‘World directory and handbook of hardmetals’, 3 edn, 1982, Leatherhead, International Carbide Data.
3. E. A. DICKINSON, P. I. WALKER, and F. L. JAGGER: in ‘Proc. 10th Plansee Seminar’, (ed. H. M. Ortner), 1981; 439-452, Reutte, Metallwerk Plansee.
4. NICHOLLS J. R. · Metallurgia · 1984 · 51 · 267
5. 10.1179/03071698280328618810.1179/030716982803286188 ↗
6. WRIGHT P. K. · J. Iron Steel Inst., · 1973 · 211 · 364
7. WILLIAMS J. E. · Metathegia · 1970 · 81 · 3
8. J. L. HAU-BRACAMONTE: PhD thesis, University of Birmingham, 1983.
9. H. mmovic: PhD thesis, University of Birmingham, 1983.
10. 10.1179/03071697480328783410.1179/030716974803287834 ↗
11. E. M. TRENT: ‘Metal cutting’, 2 edn, 193; 1984, London, Butterworths.10.1016/B978-0-408-05031-9.50009-0 ↗
12. 10.1179/03071697980327642610.1179/030716979803276426 ↗
13. WILLIAMS J. E. · J. Inst. Met., · 1970 · 98 · 144
14. 10.1243/PIME_PROC_1961_175_058_0210.1243/PIME_PROC_1961_175_058_02 ↗
15. 10.1179/03071698280328566610.1179/030716982803285666 ↗
16. STEVENSON M. G. · Iron Steel Inst., · 1973 · 211 · 710
17. 10.1179/03071698380329157810.1179/030716983803291578 ↗