journal article·2015-11

Solid solution strengthening of transient liquid phase bonded nickel based superalloy

M. Pouranvari

Materials Science and Technology· Volume 31· Issue 14
Publisher page

Abstract

This paper aims at probing and quantifying the effect of filler alloy chemistry on solid solution strengthening mechanism of transient liquid phase bonded of a cast Ni–Fe–Nb based superalloy. Bonding was performed using three different nickel based filler alloys including Ni–4·5Si–3·2B, Ni–7Cr–4·5Si–3·2B–3Fe and Ni–15·2Cr–4B. The hardness of isothermal solidification zone was proved to be the controlling factor for the shear strength of the joints. It is concluded that the initial chromium content of the filler alloy and the extent of base metal dissolution, which in turn is controlled by the initial boron content of the filler alloy, play important roles in strengthening of the isothermal solidification zone. Bonding using Ni–15·2Cr–4B resulted in eutectic free joint with the highest shear strength.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials and Metallurgical Engineering Department, Dezful Branch, Islamic Azad University, Dezful, Iran

References (37)

Show source-provided references
1. 10.1016/j.jallcom.2008.01.10110.1016/j.jallcom.2008.01.101 ↗
2. 10.1179/13621710422501230010.1179/136217104225012300 ↗
3. 10.1016/1359-6462(95)00577-310.1016/1359-6462(95)00577-3 ↗
4. 10.1007/s11661-007-9382-410.1007/s11661-007-9382-4 ↗
5. 10.1179/13621710422502178810.1179/136217104225021788 ↗
6. Duvall D. S. · Weld. J. · 1974 · 53 · 203
7. 10.1179/13621710422501217510.1179/136217104225012175 ↗
8. 10.1080/14786435.2014.88513610.1080/14786435.2014.885136 ↗
9. 10.1016/j.msea.2013.10.01310.1016/j.msea.2013.10.013 ↗
10. 10.1016/j.matdes.2012.03.03610.1016/j.matdes.2012.03.036 ↗
11. 10.1179/13621710422502172410.1179/136217104225021724 ↗
12. 10.1007/s11661-998-0183-110.1007/s11661-998-0183-1 ↗
13. 10.1146/annurev.ms.22.080192.00032310.1146/annurev.ms.22.080192.000323 ↗
14. 10.1016/j.msea.2008.01.03210.1016/j.msea.2008.01.032 ↗
15. 10.1016/j.jallcom.2007.07.10810.1016/j.jallcom.2007.07.108 ↗
16. 10.1080/14786435.2011.58028710.1080/14786435.2011.580287 ↗
17. 10.1179/1743284713Y.000000032010.1179/1743284713Y.0000000320 ↗
18. 10.1016/j.jallcom.2013.02.10010.1016/j.jallcom.2013.02.100 ↗
19. 10.1179/1743284713Y.000000023810.1179/1743284713Y.0000000238 ↗
20. 10.1007/s12540-013-5026-y10.1007/s12540-013-5026-y ↗
21. 10.1179/1879139513Y.000000007610.1179/1879139513Y.0000000076 ↗
22. 10.1016/j.msea.2006.10.04510.1016/j.msea.2006.10.045 ↗
23. 10.1016/j.msea.2013.01.02910.1016/j.msea.2013.01.029 ↗
24. 10.1016/j.matdes.2013.03.03010.1016/j.matdes.2013.03.030 ↗
25. 10.1179/1362171813Y.000000017010.1179/1362171813Y.0000000170 ↗
26. AWS A5·8, Specification for filler metals for brazing and braze welding, 2004, American Welding Society.
27. Lucas Milhaupt's data-sheet, Brazing Technical Bulletin, Brazing with Nickel Based Brazing Filler Metals.
28. Weinstein M. · Weld. J. · 2009 · 88 · 59
29. 10.1179/imr.1995.40.5.18110.1179/imr.1995.40.5.181 ↗
30. Aerospace Material Specifications (AMS), AMS 5383, Revision E, 2007.
31. 10.1007/BF0264896610.1007/BF02648966 ↗
32. Zhou-jun M. · Trans. Nonferrous Met. Soc. China · 2001 · 21 · 1009
33. 10.1007/BF0054098710.1007/BF00540987 ↗
34. 10.1007/s11661-997-0268-210.1007/s11661-997-0268-2 ↗
35. 10.1016/S1359-6454(98)00299-710.1016/S1359-6454(98)00299-7 ↗
36. 10.1007/s11661-011-1031-210.1007/s11661-011-1031-2 ↗
37. Lugscheider E. · Weld J. · 1983 · 62 · 160s