Effect of soft additives (Pb/Bi) on machinability of low carbon resulphurised free machining steels
Source abstract
Abstract
AbstractAbstractThe effect of soft additives (Pb, Bi) on the machinability of low carbon resulphurised free machining steels has been investigated using the plunge machinability test. The cutting and thrust forces and chip thickness were measured as a function of cutting speed in the steels having various contents of Pb and Bi. Unexpected results, such as very thick chips and formation of groove wear, were observed for 0·2%Bi at low cutting speeds. Such results have been attributed mainly to the lack of a stable built-up edge (BUE). As a result of these unexpected results, the effects of soft additives on various aspects of machinability differ depending on cutting speed. At high speeds, the effects of soft additives are in accordance with general understanding, i.e. machinability improves with increasing Pb or Bi content, with Bi being more effective. At low cutting speeds, some results very different from those at high cutting speeds were observed. It is obvious from these results that machinability test results may misrepresent the overall capability of steels when only a limited number of machining conditions are used. Finally, the observations made on the chips and theoretical considerations have suggested that liquid metal embrittlement by Pb or Bi could play a significant role in reducing the force in the secondary shear zone and in enhancing chip breaking. However, no definite conclusions can be made concerning whether or not the effective shear strength in the primary shear zone is reduced by liquid metal embrittlement. Solid metal embrittlement has been excluded from a possible mechanism in the primary shear zone.MST/870
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced machining processes and optimization · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. NEAD J. H. · Met. Alloys · 1939 · 1 · 109
2. SHAW M. C. · Trans. ASME · 1957 · 79 · 1165
3. 10.1115/1.366259810.1115/1.3662598 ↗
4. 10.1115/1.366445110.1115/1.3664451 ↗
5. 10.1038/253187a010.1038/253187a0 ↗
6. 10.1115/1.318385710.1115/1.3183857 ↗
7. ARAKI T. · Trans. Natl. Res. Inst. Met. Jpn · 1964 · 6 · 370
8. MOSTOVOY S. · Trans. ASM · 1968 · 61 · 219
9. D. BHATTACHARYA: in Proc. Conf. on ‘Embrittlement by liquid and solid metals’, 367; 1984, Warrendale, PA, The Metallur-gical Society of AIME.
10. REICHENBACH G. S. · Trans. ASME · 1958 · 80 · 525
11. 10.1115/1.318588110.1115/1.3185881 ↗
12. ARAKI T. · J. Jpn Soc. Mech. Eng., · 1973 · 76 · 1550
13. 10.1179/cmq.1979.18.3.34110.1179/cmq.1979.18.3.341 ↗
14. 10.1007/BF0283390910.1007/BF02833909 ↗
15. UEDA K. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1986 · 15310.2355/tetsutohagane1955.72.1_153 ↗
16. 10.1016/0025-5416(77)90115-X10.1016/0025-5416(77)90115-X ↗
17. 10.1007/BF0283392910.1007/BF02833929 ↗
18. 10.1115/1.342796410.1115/1.3427964 ↗
19. KLUFT W. · Ann. CIRP · 1979 · 28 · 441
20. 10.1179/mt.1978.5.1.18110.1179/mt.1978.5.1.181 ↗
21. 10.1115/1.366752410.1115/1.3667524 ↗
22. 10.1179/mst.1988.4.10.92610.1179/mst.1988.4.10.926 ↗
23. T. ARAKI and S. YAMAMOTO: in Proc. Conf. on ‘Machinability testing and utilization of machining data', 117; 1979, Metals Park, OH, ASM.
24. N. N. ZOREV: ‘Metal cutting mechanics’, 181; 1966, Oxford, Pergamon Press.
25. 10.1007/BF0264671010.1007/BF02646710 ↗
26. A. P. DRUSHITZ and P. GORDON: in Proc. Conf. On ‘Embrittlement by liquid and solid metals’, 285; 1984, Warrendale, PA, The Metallurgical Society of AIME.
27. N. A. GJOSTEIN: in Proc. Conf. on ‘Diffusion’, 241; 1973, Metals Park, OH, ASM.
28. 10.1016/0025-5416(75)90072-510.1016/0025-5416(75)90072-5 ↗
29. M. C. SHAW: ‘Metal cutting principles’, 251; 1984, Oxford University Press.
30. P. L. B. OXLEY: in ‘On the art of cutting metals — 75 years later’, 37; 1982, New York, ASME.
31. 10.1179/03071697980327642610.1179/030716979803276426 ↗
32. PHILIP P. K. · Int. J. Mach. Tool Des. Res., Vol. 11, 1971, p. 121
33. E. USUI and T. SHIRAKASHE in ‘On the art of cutting metals — 75 years later’, 13; 1982, New York, ASME.