journal article·2019-12

Microstructure and mechanical properties of as-deposited and heat-treated additive manufactured 9Cr steel

Chuang Gao, Xizhang Chen, Xiao Chen, Chuanchu Su

Materials Science and Technology· Volume 35· Issue 18
Publisher page

Abstract

Wire arc additive manufacturing technology has been applied to fabricate 9Cr ferritic/martensitic steel. The steel is widely used in the power industries because of good performances. The effects of different heat treatment conditions on microstructure, hardness, tensile properties, and Charpy impact toughness were investigated. The results show that the microstructure of the as-deposited condition consists of untempered lath martensitic with high strength and low toughness. It was found that heat treatment can change the microstructure characteristics. Moreover, samples after heat treatment have been observed with high elongation and impact toughness but relatively low hardness and tensile strength. The better combination of strength, ductility and microstructure were obtained for the normalising temperature of 1323 K and tempering temperature of 1033 K.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou, People's Republic of China

College of Materials Science and Engineering, China University of Petroleum, Qingdao, China

Funding

National Natural Science Foundation of China · Zhejiang Provincial Natural Science Foundation

References (34)

Show source-provided references
1. 10.1038/nature2389410.1038/nature23894 ↗
2. 10.1016/j.matdes.2019.10763010.1016/j.matdes.2019.107630 ↗
3. 10.1016/j.msea.2019.02.09710.1016/j.msea.2019.02.097 ↗
4. 10.1016/j.matdes.2019.10766810.1016/j.matdes.2019.107668 ↗
5. 10.1016/j.actamat.2019.02.02010.1016/j.actamat.2019.02.020 ↗
6. 10.1007/s12541-017-0197-y10.1007/s12541-017-0197-y ↗
7. 10.1016/j.matdes.2017.08.02610.1016/j.matdes.2017.08.026 ↗
8. 10.1007/s00170-018-3162-810.1007/s00170-018-3162-8 ↗
9. 10.1080/02670836.2019.158043410.1080/02670836.2019.1580434 ↗
10. 10.1134/S102745101901004X10.1134/S102745101901004X ↗
11. 10.1016/j.vacuum.2017.12.03410.1016/j.vacuum.2017.12.034 ↗
12. 10.1080/13621718.2017.138899510.1080/13621718.2017.1388995 ↗
13. 10.1016/j.jmatprotec.2018.04.01410.1016/j.jmatprotec.2018.04.014 ↗
14. 10.1080/02670836.2018.145501210.1080/02670836.2018.1455012 ↗
15. 10.1016/j.jnucmat.2017.07.01910.1016/j.jnucmat.2017.07.019 ↗
16. 10.1016/j.engfailanal.2017.06.04410.1016/j.engfailanal.2017.06.044 ↗
17. 10.1007/s13632-017-0377-210.1007/s13632-017-0377-2 ↗
18. 10.1016/j.jnucmat.2018.12.02810.1016/j.jnucmat.2018.12.028 ↗
19. 10.1016/j.jnucmat.2017.12.01110.1016/j.jnucmat.2017.12.011 ↗
20. Silwal B · Weld J · 2013 · 92 · 80s
21. 10.1007/s12540-017-6394-510.1007/s12540-017-6394-5 ↗
22. 10.1179/1749514813Z.0000000005010.1179/1749514813Z.00000000050 ↗
23. 10.1179/1749514813Z.0000000005110.1179/1749514813Z.00000000051 ↗
24. 10.1016/j.msea.2017.05.03610.1016/j.msea.2017.05.036 ↗
25. 10.1080/0950711960954901210.1080/09507119609549012 ↗
26. 10.1007/s11665-016-2002-y10.1007/s11665-016-2002-y ↗
27. 10.1002/srin.20130005510.1002/srin.201300055 ↗
28. 10.1016/j.ijpvp.2015.07.00110.1016/j.ijpvp.2015.07.001 ↗
29. Pandey C · Trans Indian Inst Met · 2017 · 1
30. 10.1016/j.jmapro.2017.06.00910.1016/j.jmapro.2017.06.009 ↗
31. 10.1016/j.matdes.2013.05.02010.1016/j.matdes.2013.05.020 ↗
32. 10.1016/j.addma.2018.10.02610.1016/j.addma.2018.10.026 ↗
33. 10.1007/s11665-016-2127-z10.1007/s11665-016-2127-z ↗
34. 10.1166/mex.2019.148510.1166/mex.2019.1485 ↗