Thermo-metallo-mechanical modelling of heat treatment induced residual stress in Ti–6Al–4V alloy
Source abstract
Abstract
Residual stress fields dynamically fluctuate throughout the manufacturing process of metallic components and are caused by local misfit of a thermal, mechanical or metallurgical nature. Recent advances have been made in the area of microstructure and residual stress prediction; yet few have considered dual-phase titanium alloys. The aim of the work presented was to carry out a review of the existing state-of-the-art in residual stress modelling with an intended application to industrial heat treatment of Ti–6Al–4V alloy. Four areas were evaluated: thermal, mechanical and metallurgical sub-models, and model validation via residual stress measurement. Recommendations for future research include further investigation of transformation induced plasticity and stress relaxation behaviour in Ti–6Al–4V. This review was submitted as part of the 2019 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advanced Forming Research Centre (AFRC), University of Strathclyde, Glasgow, UK
Funding
Engineering and Physical Sciences Research Council
References (100+)
Show source-provided references
1. Lutjering G · 2007 · 1
2. Mouritz A. · 2012 · 202
3. Dieter GE. · 1988
4. Hardin RA, Beckermann C, editors. Simulation of heat treatment distortion. Proceedings of the 59th SFSA Technical and Operating Conference; Chicago: Steel Founders’ Society of America; 2005.
5. 10.1155/2014/52193710.1155/2014/521937 ↗
6. 10.1179/02670830110151008710.1179/026708301101510087 ↗
7. 10.1179/02670830110150998010.1179/026708301101509980 ↗
8. 10.1080/01495739.2012.72054210.1080/01495739.2012.720542 ↗
9. MacKenzie DS, Lambert D. Effect of quenching variables on distortion and residual stresses. Heat Treating and Surface Engineering, Indiana, USA. 2003:184–191.
10. 10.1111/str.1209110.1111/str.12091 ↗
11. 10.1007/s11661-004-0070-310.1007/s11661-004-0070-3 ↗
12. 10.1007/BF0232755110.1007/BF02327551 ↗
13. Navalho D, Deus AM, Infante V, Residual stresses due to quenching in aluminum forging parts for aerospace applications: finite element analysis and contour method measurement; 2012.
14. 10.1007/s11661-004-0079-710.1007/s11661-004-0079-7 ↗
15. 10.1115/GT2014-2582710.1115/GT2014-25827 ↗
16. 10.1115/1.401191910.1115/1.4011919 ↗
17. 10.1243/03093247jsa57710.1243/03093247jsa577 ↗
18. 10.1016/j.matdes.2017.11.01310.1016/j.matdes.2017.11.013 ↗
19. 10.1016/j.jmatprotec.2016.06.03210.1016/j.jmatprotec.2016.06.032 ↗
20. 10.1016/j.addma.2014.10.00310.1016/j.addma.2014.10.003 ↗
21. 10.31399/asm.tb.ttg2.978162708269310.31399/asm.tb.ttg2.9781627082693 ↗
22. Veiga C · Rev Adv Mater Sci · 2012 · 32 · 133
23. 10.1016/S0031-8914(34)80244-310.1016/S0031-8914(34)80244-3 ↗
24. 10.1007/s11661-012-1245-y10.1007/s11661-012-1245-y ↗
25. 10.1016/j.actamat.2012.09.02610.1016/j.actamat.2012.09.026 ↗
26. ASTM International
27. 10.5772/5619710.5772/56197 ↗
28. 10.1361/10549710277033156910.1361/105497102770331569 ↗
29. 10.1016/j.jallcom.2007.10.06110.1016/j.jallcom.2007.10.061 ↗
30. 10.1002/adem.20031009510.1002/adem.200310095 ↗
31. 10.1016/j.scriptamat.2005.01.02110.1016/j.scriptamat.2005.01.021 ↗
32. 10.1016/S1044-5803(02)00286-310.1016/S1044-5803(02)00286-3 ↗
33. 10.1016/j.msea.2004.08.08410.1016/j.msea.2004.08.084 ↗
34. 10.1016/j.matchemphys.2016.06.08210.1016/j.matchemphys.2016.06.082 ↗
35. 10.1016/S0921-5093(97)00778-810.1016/S0921-5093(97)00778-8 ↗
36. Alpha + Beta Alloys. In: Lütjering G, Williams JC, editors. Titanium. Berlin, Heidelberg: Springer; 2007. p. 203–258.
37. 10.1016/S0925-8388(01)01571-710.1016/S0925-8388(01)01571-7 ↗
38. 10.1016/S0924-0136(02)00248-010.1016/S0924-0136(02)00248-0 ↗
39. 10.31399/asm.hb.v22b.a000553710.31399/asm.hb.v22b.a0005537 ↗
40. Welsch G · 1993
41. Reed-Hill RE · 1973
42. 10.1007/s11661-003-0300-010.1007/s11661-003-0300-0 ↗
43. 10.1016/S0921-5093(97)00802-210.1016/S0921-5093(97)00802-2 ↗
44. Handbook ASM. vol. 4B: Steel Heat Treating Technologies, Basics of Distortion and Stress Generation During Heat Treatment. ASM International. 2014:339–354.10.31399/asm.hb.v04b.a0005947 ↗
45. 10.1007/s11340-015-0040-210.1007/s11340-015-0040-2 ↗
46. 10.1016/j.jallcom.2017.11.26310.1016/j.jallcom.2017.11.263 ↗
47. 10.1016/j.msea.2017.09.07110.1016/j.msea.2017.09.071 ↗
48. 10.3390/ma1101014610.3390/ma11010146 ↗
49. 10.1016/j.matdes.2018.03.06510.1016/j.matdes.2018.03.065 ↗
50. 10.1034/j.1600-0692.2000.d01-6.x10.1034/j.1600-0692.2000.d01-6.x ↗
51. Simsir C · J ASTM Int (JAI) · 2010 · 1523 · 117
52. 10.1179/174328407X21310710.1179/174328407X213107 ↗
53. 10.1016/j.msea.2015.11.01010.1016/j.msea.2015.11.010 ↗
54. Ahn J. Experimental characterisation and numerical simulation of fibre laser welding of AA 2024-T3 and Ti–6Al–4V. 2016.
55. 10.1016/S1359-6454(00)00318-910.1016/S1359-6454(00)00318-9 ↗
56. 10.1007/s11665-011-9866-710.1007/s11665-011-9866-7 ↗
57. Xie J, Oancea V, Hurtado J. Phase transformations in metals during additive manufacturing processes. NAFEMS World Congress 2017; Stockholm 2017.
58. 10.1016/j.actamat.2018.12.03810.1016/j.actamat.2018.12.038 ↗
59. 10.1016/j.jcsr.2017.01.01010.1016/j.jcsr.2017.01.010 ↗
60. 10.1179/1743284712Y.000000010610.1179/1743284712Y.0000000106 ↗
61. 10.1007/s11665-002-0014-210.1007/s11665-002-0014-2 ↗
62. Majorek A, Scholtes B, Muller H, 1992. The influence of heat transfer coefficient on the development of stresses, residual stresses and distortions in martensitically hardened SAE 1045 and SAE 4140. Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, IL. 1992; p. 171–179.
63. Majorek A. Der Einfluß des Wärmeübergangs auf die Eigenspannungs- und Verzugsausbildung beim Abschrecken von Stahlzylindern in verdampfenden Flüssigkeiten. PhD Thesis. 1996; Karlsruhe University.10.1515/htm-1996-510105 ↗
64. Pollard JD, Rahimi S, Watford A, The determination of residual stress in extruded Ti–6Al–4V by contour method and finite element analysis; 2016.10.1002/9781119296126.ch46 ↗
65. 10.1016/j.matdes.2014.10.01910.1016/j.matdes.2014.10.019 ↗
66. 10.1016/j.finel.2011.03.01610.1016/j.finel.2011.03.016 ↗
67. 10.1016/S0045-7949(02)00040-810.1016/S0045-7949(02)00040-8 ↗
68. 10.1088/0957-0233/12/3/20110.1088/0957-0233/12/3/201 ↗
69. 10.1016/j.addma.2016.05.00510.1016/j.addma.2016.05.005 ↗
70. 10.1016/j.matdes.2016.11.07810.1016/j.matdes.2016.11.078 ↗
71. 10.1016/j.jmatprotec.2015.12.01410.1016/j.jmatprotec.2015.12.014 ↗
72. 10.1007/s40195-015-0276-y10.1007/s40195-015-0276-y ↗
73. 10.1134/S0018151X1204004910.1134/S0018151X12040049 ↗
74. 10.1016/0022-5088(61)90064-910.1016/0022-5088(61)90064-9 ↗
75. 10.1115/1.403352510.1115/1.4033525 ↗
76. Kelly SM. Thermal and microstructure modeling of metal deposition processes with application to Ti–6Al–4V. 2004.
77. 10.1007/s11837-005-0112-310.1007/s11837-005-0112-3 ↗
78. 10.3390/met808063310.3390/met8080633 ↗
79. 10.1016/S0925-8388(00)01227-510.1016/S0925-8388(00)01227-5 ↗
80. 10.1007/s11661-001-0345-x10.1007/s11661-001-0345-x ↗
81. 10.1007/s11837-003-0013-210.1007/s11837-003-0013-2 ↗
82. 10.1088/0965-0393/20/5/05500610.1088/0965-0393/20/5/055006 ↗
83. Murgau CC. Microstructure model for Ti–6Al–4V used in simulation of additive manufacturing; 2016.
84. 10.1177/146442071347734410.1177/1464420713477344 ↗
85. 10.1063/1.173747610.1063/1.1737476 ↗
86. Vander Voort GF. · 1991
87. 10.1016/0001-6160(59)90170-110.1016/0001-6160(59)90170-1 ↗
88. 10.1016/S0749-6419(99)00078-910.1016/S0749-6419(99)00078-9 ↗
89. O'Meara N. Developing material models for use in finite element predictions of residual stresses in ferritic steel welds; 2016.
90. 10.1016/j.apm.2014.10.02010.1016/j.apm.2014.10.020 ↗
91. Magee CL, Paxton HW. Transformation kinetics, microplasticity, and aging of martensite in Fe–31 Ni. CARNEGIE INST OF TECH PITTSBURGH, PA; 1966.
92. 10.1098/rspa.1965.002910.1098/rspa.1965.0029 ↗
93. 10.1002/mawe.20050097110.1002/mawe.200500971 ↗
94. Crespo A., Deus A., Vilar R. 2009. Modeling of phase transformations and internal stresses in laser powder deposition. In XVII International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers (Vol. 7131, p. 713120). International Society for Optics and Photonics.10.1117/12.817405 ↗
95. 10.1088/0957-0233/8/11/00610.1088/0957-0233/8/11/006 ↗
96. 10.1016/j.msea.2017.09.11610.1016/j.msea.2017.09.116 ↗
97. 10.1016/j.matchar.2018.03.02710.1016/j.matchar.2018.03.027 ↗
98. Babu B. Physically based model for plasticity and creep of Ti–6Al–4V; 2008.
99. 10.1177/095440541453949410.1177/0954405414539494 ↗
100. 10.1016/j.actamat.2015.04.05610.1016/j.actamat.2015.04.056 ↗