Identification of material model of TiN using numerical simulation of nanoindentation test
Source abstract
Abstract
The development of the model of the multistep nanoindentation test with Berkovich indenter, accounting for the residual stress distribution, is one of the aims of the present paper. The specimen is unloaded in the intervals between the deformation steps. Substrate, which is composed of a ferritic steel and biocompatible pulsed laser deposition TiN coating, is considered. The selection of the TiN was inspired by its perspective application as the coating for a constructional element of the heart prosthesis (blood chamber and aortic valves). Sensitivity analysis of the model predictions with respect to its parameters is presented in the present paper. The theory of elastic-plastic deformations is used in the finite element model, which simulates both loading and unloading phases, accounting for the real geometry of the indent. The main goal of the present paper was to inversely analyse the tests for coating/substrate system. Square root error between measured and predicted forces is the objective function in the analysis. Results of the inverse calculations, which are presented in the present paper, may be helpful in simulations of the behaviour of TiN deposited on substrate in various applications as bionanomaterials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Computer Science and Modelling, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, Kraków 30-059, Poland
Institute of Metallurgy and Materials Science PAN (IMIM PAN), Ul. Reymonta 25, Kraków 30-059, Poland
Leoben Laser Centre, Leobner Straβe 94, Niklasdorf 8712, Austria
References (26)
Show source-provided references
1. Lackner J. M. ‘Industrially-scaled hybrid pulsed laser deposition at room temperature’; 2005, Kraków, Orekop.
2. 10.1007/978-0-387-22462-610.1007/978-0-387-22462-6 ↗
3. Berasategui E. G., Bull S. J., and Page T. F. Thin Solid Films, 2004, 447–448, 26–32.10.1016/j.tsf.2003.09.056 ↗
4. Page T. F., and Bull S. J. Philos. Mag. Lett., 2006, 86, 5331–5346.10.1080/14786430600743884 ↗
5. Bull S. J., Berasetegui E. G., and Page T. F. Wear. 2004, 256, 857–866.10.1016/j.wear.2003.10.031 ↗
6. Kopernik M., and Pietrzyk M. Arch. Metall. Mater., 2007, 52, 299–310.
7. Kopernik M., Spychalski M., Kurzydłowski K. J., and Pietrzyk M. Mater. Sci. Technol., 2008, 24, 369–375.10.1179/174328408X278510 ↗
8. Lackner J. M., Waldhauser W., Major R., Major L., and Major B. Surf. Coat. Technol, 2006, 201, 4090–4093.10.1016/j.surfcoat.2006.08.025 ↗
9. Major R., Brucken F., Lackner J. M., Waldhauser W., Pietrzyk M., and Major B. Bull. Pol. Acad. Sci. Technol., 2008, 56, 223–228.
10. Kopernik M., and Nowak J. Arch. Mech., 2009, 61, 171–193.10.1007/s00205-008-0187-4 ↗
11. Milenin A., and Kopernik M. Acta Biomech. Bioeng., 2009, 11, 13–20.
12. Major R., Czarnowska E., Sowińska A., Kustosz R., Lackner J. M., Waldhauser W., Woźniak M., Wicrzchoń T., and Major B. e-Polymers, 2005, 26. 1–9.
13. Carole D., Frety N., Etienne-Calas S., Merlet C., and Marin-Ayral R.M. Mater. Sci. Eng., 2006, 419, 365–371.10.1016/j.msea.2006.01.025 ↗
14. Guemmaz M., Mosser A., and Grob J. Appl. Phys., 1997, 64, 407–415.10.1007/s003390050497 ↗
15. Russias J., Cardinal S., Fontaine J., Fantozzi G., Esnouf C., and Bienvenu K. Int. J. Refract. Met. Hard Mater., 2005, 23, 344–349.10.1016/j.ijrmhm.2005.05.013 ↗
16. Shojaei O. R., and Karimi A. Thin Solid Films, 1998, 332, 202–208.10.1016/S0040-6090(98)01057-8 ↗
17. Thornton J. A. J. Vac. Sci. Technol., 1974, 11, 666–670.10.1116/1.1312732 ↗
18. Oh C. S., Lee H. J., Ko S. G., Kim S. W., and Ahn H. G. Sens. Actuator, 2005, 117, 151–158.10.1016/j.sna.2004.06.008 ↗
19. Greene J. E. ‘Multicomponent and multilayered thin films for advanced microtechnologies: techniques, fundamentals and devices’; 1993, Dordrecht, Kluwer Academic.
20. Kopernik M., and Szeliga D. Comput. Methods Mater. Sci., 2007, 7, 255–261.
21. Albrecht H.J., Hannach T., Häse A., Juritza A., Müller K., and Müller W. H. Arch. Appl. Mech., 2005, 74, 728–738.10.1007/s00419-005-0394-5 ↗
22. Kopernik M., and Milenin A. Steel Res. Int., 2008, 79, 555–562.
23. Ilushin A. ‘Plastichnost’; 1963, Moscow, AN ZSSR.
24. Zienkiewicz O. C., Taylor R. L. ‘The finite element method’; 2000, London, Butterworth-Heinemann.
25. Szeliga D. Comput. Methods Mater. Sci., 2005, 5, 170–178.10.2478/cmam-2005-0009 ↗
26. Nelder J. A., and Mead R. A. Comput. J., 1965, 7, 308–313.10.1093/comjnl/7.4.308 ↗