journal article·2014-03

Influence of tungsten on microstructure and wear resistance of iron base hardfacing alloy

D. S. Liu, R. P. Liu, Y. H. Wei

Materials Science and Technology· Volume 30· Issue 3
Publisher page

Abstract

A series of iron based hardfacing alloys with varying tungsten contents were fabricated using slag free self-shielded flux cored wire, and the effects of tungsten addition on microstructure and wear performance were investigated. The experimental results showed that the iron base tungsten free hardfacing alloy has a typical hypereutectic microstructure, which consists of primary hexagonal M7(C, B)3 carbides and eutectic long bar-like M3(C, B) carbides in the austenite and martensite matrix. The addition of tungsten increases the size of primary hexagonal M7(C, B)3 carbides and promotes the formation of martensite, as well as changes the morphology of eutectic carbides. It was found that the eutectic carbides change from the long bar-like shape to the scattered web shape with the increase in tungsten content to 9 wt-, and subsequently change to the plate shape with further increasing the tungsten content to 12 wt-. For the all tungsten containing hardfacing alloys, tungsten exists in both the carbides and matrix uniformly. Results also showed that the wear loss of the sample with 9 wt- tungsten was the smallest among all the samples owing to the higher hardness and reinforced microstructure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Material Science and Engineering Jiangsu University of Science and Technology, Zhenjiang 212003, China

College of Material Science and Technology Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

References (23)

Show source-provided references
1. 10.1179/174328407X15422010.1179/174328407X154220 ↗
2. 10.1179/174328407X16673110.1179/174328407X166731 ↗
3. 10.1016/j.surfcoat.2010.02.02810.1016/j.surfcoat.2010.02.028 ↗
4. 10.1179/174328407X18580210.1179/174328407X185802 ↗
5. 10.1016/S0043-1648(03)00101-710.1016/S0043-1648(03)00101-7 ↗
6. 10.1179/1743294411Y.000000009010.1179/1743294411Y.0000000090 ↗
7. 10.1179/02670830422501741810.1179/026708304225017418 ↗
8. 10.1007/s11249-010-9634-010.1007/s11249-010-9634-0 ↗
9. 10.1179/02670830422501123410.1179/026708304225011234 ↗
10. 10.1179/174329307X22720110.1179/174329307X227201 ↗
11. 10.1016/j.surfcoat.2012.07.07810.1016/j.surfcoat.2012.07.078 ↗
12. 10.1179/174328406X8159510.1179/174328406X81595 ↗
13. 10.1016/j.msea.2007.05.09610.1016/j.msea.2007.05.096 ↗
14. 10.1179/174328406X10073410.1179/174328406X100734 ↗
15. Conde R. H. ‘Wear resistant coatings’; 1986, Buenos Aires, Conarco Technical Bulletin.
16. 10.1179/1743284711Y.000000008210.1179/1743284711Y.0000000082 ↗
17. Calos N. J., Christodoulou P., Graham E., Cousens D., and Bekessy L. ‘Structural studies of ferrous alloys containing boron’; 1999, Brisbane, The University of Queensland.
18. 10.1080/13640461.2001.1181941610.1080/13640461.2001.11819416 ↗
19. Li J., and Smith R. W.: Proc. 4th Decennial Int. Conf. on ‘Solidification processing’, Sheffield, UK, July 1997, University of Sheffield, 481–488.
20. 10.1007/BF0072368510.1007/BF00723685 ↗
21. 10.1016/j.wear.2008.11.00910.1016/j.wear.2008.11.009 ↗
22. 10.1016/j.surfcoat.2011.01.00310.1016/j.surfcoat.2011.01.003 ↗
23. Wang Q. B. · Weld. J. · 2010 · 89 · 133