journal article·2018-03Open access

Residual stress control of multipass welds using low transformation temperature fillers

R. J. Moat, S. Ooi, A. A. Shirzadi, H. Dai, A. F. Mark, H. K. D. H. Bhadeshia, P. J. Withers

Materials Science and Technology· Volume 34· Issue 5

Abstract

Low transformation temperature (LTT) weld fillers can be used to replace tensile weld residual stresses with compressive ones and reduce the distortion of single-pass welds in austenitic plates. By contrast, weld fillers in multipass welds experience a number of thermal excursions, meaning that the benefit of the smart LTT fillers may not be realised. Here, neutron diffraction and the contour method are used to measure the residual stress in an eight pass groove weld of a 304 L stainless steel plate using the experimental LTT filler Camalloy 4. Our measurements show that the stress mitigating the effect of Camalloy 4 is indeed diminished during multipass welding. We propose a carefully selected elevated interpass hold temperature and demonstrate that this restores the LTT capability to successfully mitigate residual tensile stresses. This paper is part of a thematic issue on Nuclear Materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

formally at School of Materials, University of Manchester, Manchester, UK

Materials Engineering, Open University, Milton Keynes, UK

Department of materials, University of Cambridge, Cambridge, UK

School of Materials, University of Manchester, Manchester, UK

Funding

EPSRC

References (28)

Show source-provided references
1. 10.1088/0034-4885/70/12/R0410.1088/0034-4885/70/12/R04 ↗
2. 10.1179/174328407X21311610.1179/174328407X213116 ↗
3. 10.1016/j.actamat.2008.03.04510.1016/j.actamat.2008.03.045 ↗
4. Wang W · J Mater Sci Technol · 2002 · 18 · 527
5. 10.1016/S0142-1123(99)00062-610.1016/S0142-1123(99)00062-6 ↗
6. 10.1179/136217109X43717810.1179/136217109X437178 ↗
7. 10.1115/PVP2007-2654410.1115/PVP2007-26544 ↗
8. 10.1179/1362171814Y.000000023410.1179/1362171814Y.0000000234 ↗
9. 10.1179/1362171813Y.000000016210.1179/1362171813Y.0000000162 ↗
10. 10.1007/s11661-008-9616-010.1007/s11661-008-9616-0 ↗
11. 10.1179/136217110X1271421730961410.1179/136217110X12714217309614 ↗
12. 10.1179/1362171811Y.000000000310.1179/1362171811Y.0000000003 ↗
13. 10.1016/j.msea.2010.06.03510.1016/j.msea.2010.06.035 ↗
14. 10.1007/s40194-016-0373-110.1007/s40194-016-0373-1 ↗
15. 10.1007/s40194-017-0502-510.1007/s40194-017-0502-5 ↗
16. 10.1179/1362171814Y.000000020910.1179/1362171814Y.0000000209 ↗
17. Dai H, Mark AF, Moat RJ, Modelling of Residual Stress Minimization through Martensitic Transformation in Stainless Steel Welds. GRAZ, Austria. in: 9th Int. Semin. Numer. Anal. Weldability, Graz. 2009;239–252.
18. 10.1115/PVP2011-5732910.1115/PVP2011-57329 ↗
19. 10.1016/j.crhy.2007.09.01510.1016/j.crhy.2007.09.015 ↗
20. 10.1016/S0921-4526(00)00481-610.1016/S0921-4526(00)00481-6 ↗
21. 10.1107/S002188980703026910.1107/S0021889807030269 ↗
22. 10.1080/1023816041000172676510.1080/10238160410001726765 ↗
23. 10.1063/1.36595610.1063/1.365956 ↗
24. 10.1002/9781118402832.ch510.1002/9781118402832.ch5 ↗
25. 10.4028/www.scientific.net/MSF.490-491.29410.4028/www.scientific.net/MSF.490-491.294 ↗
26. 10.1016/j.msea.2014.06.01210.1016/j.msea.2014.06.012 ↗
27. 10.1016/j.ijpvp.2004.08.00310.1016/j.ijpvp.2004.08.003 ↗
28. 10.1115/1.312203610.1115/1.3122036 ↗