Hot ductility behaviour of high manganese steels with varying aluminium contents
Source abstract
Abstract
The influence of aluminium on the hot ductility of high manganese steels between 700°C and Tliq has been examined, using the hot tensile test machine. Five materials with 17 wt-% [Mn], 0.3 wt-% [C] and 0–8 wt-% [Al] were cast. To detect the cause of cracking, optical microscopy and scanning electron microscopy analysis of the fracture surfaces have been conducted and compared to thermodynamic modelling. By adding more than 3 wt-% [Al] the fully austenitic structure changed to a two-phase structure (δ-Fe, γ-Fe). In case of the one- and also two-phase structured materials two regions of lower ductility (<30% RA) are present. Complex (AlN) and Mn(S,Se) precipitates were formed with different cores in dependence of the [Al] content.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Ferrous Metallurgy, RWTH Aachen University, Germany
Funding
Deutsche Forschungsgemeinschaft
References (31)
Show source-provided references
1. 10.1007/s40195-014-0084-910.1007/s40195-014-0084-9 ↗
2. 10.2355/isijinternational.43.43810.2355/isijinternational.43.438 ↗
3. 10.1016/S0749-6419(00)00015-210.1016/S0749-6419(00)00015-2 ↗
4. 10.1016/j.msea.2004.01.06010.1016/j.msea.2004.01.060 ↗
5. Cardoso G. I. S. L. · ‘Hot ductility of aluminium and titanium containing steels with and without cyclic temperature oscillations', Ironmak. Steelmak. · 1995 · 22
6. Schwerdtfeger K. · 1994
7. 10.2355/isijinternational1966.24.35110.2355/isijinternational1966.24.351 ↗
8. 10.1179/mst.1986.2.11.109910.1179/mst.1986.2.11.1099 ↗
9. Kim S.K., Cho J.W., Kwak W.J., Kim G., and Kwon O. ‘Development of TWIP steel for automotive application', Proc. 3rd Int. Conf. on 'New dewelopments in metallurgical process technologies', Germany, 2007, Steel Institute VDEh Duesseldorf, 690–697.
10. 10.1179/026708309X1250693387338710.1179/026708309X12506933873387 ↗
11. 10.1179/026708309X1259571230591510.1179/026708309X12595712305915 ↗
12. 10.1179/1743284711Y.000000010910.1179/1743284711Y.0000000109 ↗
13. 10.1179/1743284713Y.000000039910.1179/1743284713Y.0000000399 ↗
14. 10.1179/174328413X1378982429394810.1179/174328413X13789824293948 ↗
15. 10.1179/174328407X17973710.1179/174328407X179737 ↗
16. Kang S. E. · ‘The hot ductility of Al-containing TRIP steels melted in-situ,’ Assoc. Iron Steel Technol. · 2008 · 717
17. 10.1007/s11663-015-0306-110.1007/s11663-015-0306-1 ↗
18. 10.1179/095066009X1257253017062410.1179/095066009X12572530170624 ↗
19. Banks K. M. · ‘The influence of N on hot ductility of V- Nb-, and Nb-Ti-containing steels using improved thermal simulation of continuous casting', J. S. Afr. Inst. Min. Metall. · 2011 · 111
20. 10.1002/adem.20060015210.1002/adem.200600152 ↗
21. Blazek K., Yin H., Skoczylas G., McClymonds M., and Frazee M., eds. ‘Development and evaluation of lime-alumina based powder for casting high aluminium trip steel grades’, vol. 1; 2011, AISTech 2011, Indianapolis, USA, Association for Iron & Steel Technology, Pittsburgh, Pennsylvania, USA.
22. Becker J. J., Madden M. A., Natarajan T. T., Piccone T. J., Serrano E. J., and Story S. R., eds. ‘Liquid, solid interactions during continuous casting of high-Al advanced high-strength steels’; 2005, AISTech 2005, Charlotte, NC, USA, Association for Iron & Steel Technology, Warrendale, PA.
23. Walner E. ‘Light and easily formable: new high-manganese steel from Hoesch Hohenlimburg is now available’, 2014. Available at: https://www.thyssenkrupp-steel.com/de/presse/pressemitteilungen/pressemitteilung-8960.html.
24. Schulze R. ‘Acroni produce X120Mn12 grade on continuous caster from primetals technologies’, 2015, London, UK. Available at: https://www.primetals.com/en/pressandmedia/Documents/PR2015060785en.pdf.
25. Banks K. M. · 2000
26. 10.1179/imr.1991.36.1.18710.1179/imr.1991.36.1.187 ↗
27. Thomas B. G. · ‘The formation of panel cracks in steel ingots: a state-of-the-art review', ISS Trans. · 1986 · 7 · 7
28. Suzuki H. G., Nishimura S., and Yamaguchi S. ‘Characteristics of hot ductility in steels subjected to the melting and solidification', Trans. ISIJ, 1982, 22, 48–56.10.2355/isijinternational1966.22.48 ↗
29. 10.1002/adem.20070013810.1002/adem.200700138 ↗
30. Wolf M. M. ‘Initial solidification & strand surface quality of peritectic steels', in ‘Continuous casting’ (ed. Wolf M. M.), pp. 1–111; 1997, Warrendale, OP, Iron & steel society.
31. Jacobi H. ‘Giessen und Erstarren von Stahl', Chap. 3 in ‘Metallurgie des Stranggiessens’ (Schwerdtfeger K., and Diener A., eds.), pp. 125–170, 1992, Düsseldorf, Stahleisen.