journal article·2001-01

Tensile behaviour of powder metallurgy processed (Al–Cu–Mg)/SiCpcomposites

V.K. Varma, S.V. Kamat, V.V. Kutumbarao

Materials Science and Technology· Volume 17· Issue 1
Publisher page

Abstract

The tensile behaviour of Al–Cu–Mg alloy matrix composites produced by a powder metallurgy process was investigated as a function of particle size in the as extruded, homogenised, and peak aged conditions. The tensile behaviour of the corresponding matrix alloy which was produced in a similar manner, designated as Control, was also studied. There was a significant increase in the 0.2% yield strength of Control and all the metal matrix composites (MMCs) after homogenisation treatment (53–68%) and peak aging (93–109%), as compared to their values in the as extruded condition. The ultimate tensile strength (UTS) of Control as well as the MMCs also increases considerably after homogenisation treatment (39–70%), however, subsequent peak aging did not result in any further increase in UTS in case of any of the MMCs. It was found that the finer the reinforcement size, the higher the 0.2% yield strength and UTS in all the conditions. On the other hand, ductility decreased considerably after homogenisation treatment and subsequent peak aging. The results are discussed in the light of dislocation strengthening as well as reinforcement damage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. 10.1016/0956-7151(90)90155-A10.1016/0956-7151(90)90155-A ↗
2. 10.1007/BF0278242010.1007/BF02782420 ↗
3. 10.1007/BF0054444810.1007/BF00544448 ↗
4. 10.1016/1359-835X(96)00040-110.1016/1359-835X(96)00040-1 ↗
5. 10.1016/0036-9748(83)90072-810.1016/0036-9748(83)90072-8 ↗
6. 10.1007/BF0281167910.1007/BF02811679 ↗
7. 10.1016/0001-6160(88)90236-210.1016/0001-6160(88)90236-2 ↗
8. M. MANOHARAN, C. LIU, and J. J. LEWANDOWSKI: Proc. Int. Conf. on Fracture 7, ICF 7, (ed. K. Salama etal.), 2977–2985; 1989, Oxford, Pergamon.
9. 10.1016/0921-5093(89)90392-410.1016/0921-5093(89)90392-4 ↗
10. ARSENAULT R. J. · Mater. Sci. Eng. A · 1991 · 135 · 55–68
11. 10.1007/BF0115123510.1007/BF01151235 ↗
12. 10.1016/0025-5416(86)90258-210.1016/0025-5416(86)90258-2 ↗
13. 10.1016/0956-7151(90)90273-J10.1016/0956-7151(90)90273-J ↗
14. 10.1016/0956-716X(91)90349-610.1016/0956-716X(91)90349-6 ↗
15. 10.1115/1.316915010.1115/1.3169150 ↗
16. 10.1016/0001-6160(87)90224-010.1016/0001-6160(87)90224-0 ↗
17. 10.1016/0956-7151(92)90449-O10.1016/0956-7151(92)90449-O ↗
18. 10.1007/BF0035782610.1007/BF00357826 ↗
19. 10.1007/BF0267228510.1007/BF02672285 ↗
20. J. BRYANT: Proc. Symp. on 'Aluminium alloys in the aircraft industries', 45–56; 1978, Stonehouse, Glos., Technicopy.
21. 10.1007/BF0267228710.1007/BF02672287 ↗
22. 10.1007/BF0072265710.1007/BF00722657 ↗
23. 10.1007/BF0112467510.1007/BF01124675 ↗
24. 10.1007/BF0055027610.1007/BF00550276 ↗
25. 10.1016/0001-6160(87)90188-X10.1016/0001-6160(87)90188-X ↗
26. 10.1016/0036-9748(87)90227-410.1016/0036-9748(87)90227-4 ↗
27. 10.1016/0921-5093(91)90555-210.1016/0921-5093(91)90555-2 ↗
28. 10.1016/0956-7151(91)90156-U10.1016/0956-7151(91)90156-U ↗
29. 10.1007/BF0264612210.1007/BF02646122 ↗
30. 10.1016/0956-7151(94)90437-510.1016/0956-7151(94)90437-5 ↗
31. F. J. HUMPHREYS, A. BASU, and M. R. DJAZEB: Proc. 12th Riso Int. Symp. on Material Science, (ed. N. Hansen etal.), 51–66; 1991, Roskilde, Riso National Laboratory.
32. 10.1007/BF0240297510.1007/BF02402975 ↗
33. 10.1016/0001-6160(89)90339-810.1016/0001-6160(89)90339-8 ↗
34. 10.1016/0956-7151(91)90199-B10.1016/0956-7151(91)90199-B ↗
35. 10.1016/0956-7151(91)90008-O10.1016/0956-7151(91)90008-O ↗
36. JAIN M. · Mater. Sci Eng. A · 1994 · 183 · 1
37. 10.1007/BF0264652710.1007/BF02646527 ↗
38. 10.1016/0956-7151(93)90186-V10.1016/0956-7151(93)90186-V ↗
39. 10.1016/0956-7151(94)00346-J10.1016/0956-7151(94)00346-J ↗
40. 10.1016/0956-716X(91)90344-Z10.1016/0956-716X(91)90344-Z ↗
41. 10.1016/0956-716X(91)90346-310.1016/0956-716X(91)90346-3 ↗
42. 10.1016/0956-716X(91)90347-410.1016/0956-716X(91)90347-4 ↗
43. 10.1016/0956-716X(91)90348-510.1016/0956-716X(91)90348-5 ↗
44. 10.1016/0956-7151(91)90146-R10.1016/0956-7151(91)90146-R ↗
45. 10.1007/BF0264659710.1007/BF02646597 ↗
46. 10.1016/0921-5093(94)90924-510.1016/0921-5093(94)90924-5 ↗
47. 10.1016/0956-7151(94)90148-110.1016/0956-7151(94)90148-1 ↗
48. 10.1016/1359-6454(95)00437-810.1016/1359-6454(95)00437-8 ↗
49. 10.1016/0956-7151(91)90328-X10.1016/0956-7151(91)90328-X ↗
50. 10.1016/0001-6160(86)90166-510.1016/0001-6160(86)90166-5 ↗
51. 10.1007/BF0264948010.1007/BF02649480 ↗
52. 10.1016/0025-5416(86)90261-210.1016/0025-5416(86)90261-2 ↗
53. 10.1007/BF0264394410.1007/BF02643944 ↗
54. 10.1016/0956-7151(91)90327-W10.1016/0956-7151(91)90327-W ↗
55. 10.1016/0036-9748(84)90083-810.1016/0036-9748(84)90083-8 ↗
56. 10.1016/0956-716X(91)90407-R10.1016/0956-716X(91)90407-R ↗
57. T. J. A. DOEL, P. BOWEN, and M. H. LORETTO: Proc. 2nd Eur. Conf. on 'Advanced materials and processes', Euromet '91, (ed. T. W. Clyne and P. J. Withers), Vol. 2, 161–170; 1992, London, The Institute of Materials.
58. J. ALLEN, M. BOURKE, M. T. HUCHINGS, A. D. KRAWITZ, and C. G. WILSON: 'Residual stresses in science and technology', (ed. E. Macherauch and V. Haunk), 151; 1991, Oberusel, DGM.
59. M. F. ASHBY and D. R. H. JONES: 'Engineering materials 2'; 1986, Oxford: Pergamon.
60. 10.1016/0025-5416(86)90368-X10.1016/0025-5416(86)90368-X ↗
61. 10.1016/0036-9748(87)90431-510.1016/0036-9748(87)90431-5 ↗
62. J. WHITE, T. C. WILLIS, I. R. HUGHES, and R. M. JORDAN: 'Dispersion strengthened aluminum alloys', 693–708; 1989, Warrendale, PA, TMS-AIME.
63. R. CROWE and D. F. HASSON: 'Strength of Metals and Alloys VI', (ed. R. C. Gifkins), 859–865; 1983, Oxford, Pergamon.10.1016/B978-1-4832-8423-1.50139-5 ↗