journal article·2012-06

Microstructural and mechanical properties of service exposed Alloy 625 ammonia cracker tube removed after 100 000 h

J K Chakravartty, J B Singh, M Sundararaman

Materials Science and Technology· Volume 28· Issue 6
Publisher page

Abstract

The present study examined the evolution of microstructure and mechanical properties of Alloy 625 ammonia cracker tubes of heavy water production plant which had been exposed to temperatures around 600°C for 100 000 h. Detailed investigations revealed considerable modification of microstructure, significant increase of strength and loss of ductility and toughness during service and the extent of degradations were found to be sensitive to service temperature at different locations of the tube. While the increase in strength was due to precipitation of γ′′ and Ni2(Cr,Mo), the loss in ductility resulted from the presence of carbides and needle shaped δ particles at grain boundaries. When the exposed material was tested at elevated temperatures, the material softened with an attendant increase in ductility and toughness. A solution annealing treatment at 1160°C for 2 h was found to restore the microstructural as well as mechanical properties similar to that of virgin material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400 085, India

School of Engineering Sciences and Technology, University of Hyderabad, Gachibowli, Hyderabad 500 046, India

References (17)

Show source-provided references
1. Raman VV · Trans. IIM · 1987 · 40 · 113
2. 10.1007/s11661-999-0194-610.1007/s11661-999-0194-6 ↗
3. 10.1016/S0022-3115(00)00723-610.1016/S0022-3115(00)00723-6 ↗
4. 10.1016/S1359-6462(01)00965-410.1016/S1359-6462(01)00965-4 ↗
5. Kumar N, Mittra J, Misra B, Sundararaman M, Chakravartty JK, Mahajan MP: Proc. Natl Conf. on ‘Ageing management of structures, systems and components (NCAM–2004)’, Mumbai, India, December 2004, NO. 50.
6. 10.1007/s11661-998-0013-510.1007/s11661-998-0013-5 ↗
7. http://rsbweb.nih.gov/ij/
8. 10.7449/1994/Superalloys_1994_13_3710.7449/1994/Superalloys_1994_13_37 ↗
9. Verma A, Singh JB, Sundararaman M: ‘Phase transformation and structure property correlation in Ni–Cr–Mo–W alloys’, Unpublished research work, Bhabha Atomic Research Centre, Mumbai, India, 2011.
10. Shankar V · A · 2004 · 35 · 3129
11. http://www.specialmetals.com/products/inconelalloy625.php
12. http://www.hightempmetals.com/techdata/hitempInconel625data.php
13. 10.1016/0308-0161(94)90140-610.1016/0308-0161(94)90140-6 ↗
14. Stoloff NS:in ‘Superalloys’(, Sims C T, et al.), Chapter 3, 61–95; 1987, New York, John Wiley & Sons.
15. 10.1017/CBO9780511541285.00410.1017/CBO9780511541285.004 ↗
16. Mills WJ · Weld. J. · 1987 · 66 · 113
17. 10.1179/mst.1990.6.8.76410.1179/mst.1990.6.8.764 ↗