Measurement of sensitivity to dynamic strain aging in C–Mn steels by internal friction experiments
Source abstract
Abstract
The dynamic strain aging (DSA) phenomenon is present in C–Mn steels and associated welds commonly used in many industrial applications. This phenomenon, which appears in metals containing solute atoms interacting with dislocations, induces an increase in flow stress and ultimate tensile strength (UTS) as well as a decrease in ductility. The DSA phenomenon was studied by tensile, strain rate sensitivity and internal friction tests between 20°C and 350°C in two C–Mn steels with very different sensitivities to DSA (a fully killed A42 steel and a semikilled A48 steel). The internal friction technique, which allows one to evaluate the balance between carbon and nitrogen atoms free in the lattice and carbon and nitrogen atoms interacting with mobile dislocations, appears to give results well correlated with those obtained by tensile (and strain rate sensitivity) tests. The ductility loss or the UTS increase is shown to be proportional to Snoek peak height. It is concluded that, even in industrial materials, a single internal friction test can give a good evaluation of DSA sensitivity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Baird J. D.: in ‘The inhomogeneity of plastic deformation’, 191; 1973, Metals Park, OH, ASM.
2. 10.1016/0001-6160(72)90164-210.1016/0001-6160(72)90164-2 ↗
3. McCormick P. G. · Acta Metall · 1972 · 20 · 35
4. Strudel J. L.: in ‘Dislocations et deformation plastique’, (ed.Groh P. et al); 1979, Paris, Les editions de la physique.
5. Neuhäuser H., and Schwink C.: in ‘Materials science and technology’ (ed. Cahn R. W. et al), Vol. 6. ‘Plastic deformation and fracture of materials’, 196-243; 1993, Weinheim, London, VCH.
6. Estrin Y., and Kubin L. P.: in ‘Continuum models for materials with microstructure’, (ed. Mühlhaus H. B.), 395; 1995, New York, Wiley.
7. 10.1051/metal:200011310.1051/metal:2000113 ↗
8. Wagner D. · Rev. Metall · 2001 · 5 · 1481
9. 10.1179/mtlr.1970.15.1.10110.1179/mtlr.1970.15.1.101 ↗
10. Rodriguez P.: in ‘Encyclopedia of materials science and engineer-ing’, (ed.Calm R. W.), Supplementary 1,504; 1988, Oxford, Pergamon.
11. 10.1016/0956-716X(93)90102-X10.1016/0956-716X(93)90102-X ↗
12. Lebyodkin M., Dunin-Barkowskii L., Bréchet Y., Y. Estrin and
13. 10.1016/S1359-6454(00)00067-710.1016/S1359-6454(00)00067-7 ↗
14. Leslie W. C.: in ‘Encyclopedia of materials science and engineer-ing’, 5, 4007; 1986, Oxford, Pergamon Press.
15. Marschall C. W., Landow M. P., and Wilkowski G. M.: ASTM STP 1074, 1990, 339.10.1520/STP19003S ↗
16. Prioul C. · Mem. Etud Set Rev. Metall · 1982 · 79 · 203
17. Fast J. D. · Metaux-Corros.-Ind · 1961 · 435 · 383
18. 10.1080/1478643710821642610.1080/14786437108216426 ↗
19. 10.1016/0001-6160(66)90018-610.1016/0001-6160(66)90018-6 ↗
20. 10.1016/0025-5416(76)90229-910.1016/0025-5416(76)90229-9 ↗
21. 10.1016/0001-6160(67)90081-810.1016/0001-6160(67)90081-8 ↗
22. 10.1016/S0036-9748(88)80211-410.1016/S0036-9748(88)80211-4 ↗
23. 10.1016/0036-9748(82)90341-610.1016/0036-9748(82)90341-6 ↗
24. Fergusson P., and Jack H.: Proc. Heat Treatment Conf., Birmingham, UK, 1981, The Metals Society, 158.
25. 10.1016/0001-6160(85)90109-910.1016/0001-6160(85)90109-9 ↗
26. 10.1007/BF0264720610.1007/BF02647206 ↗
27. 10.1007/BF0266986310.1007/BF02669863 ↗
28. Cheng L. · Metall Trans. A · 1992 · 23 · 273710.1007/BF02651753 ↗
29. Grumbach M. · Cah. Inf. Tech. · 1970 · 5 · 1285