Estimation of long-term creep strength in austenitic power plant steels
Source abstract
Abstract
This paper presents the characteristics of the performance of austenitic steel Super 304H and HR3C used for construction of boilers with supercritical and ultra-supercritical steam parameters. Characteristic microstructure images of the examined steels in the as received condition observed with the scanning electron microscope are shown. The method for strength assessment based on abridged creep tests carried out at a temperature higher than the design one is presented on the example of examined steels. It has been demonstrated that the obtained results do not deviate from the values of creep strength determined in long-term creep tests. The maximum difference is ± 20%, which is in compliance with the acceptable scatter band. The presented methodology can be used for verification of creep strength.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fire effects on concrete materials · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Ferrous Metallurgy, K. Miarki 12-14, 44-100 Gliwice, Poland
Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland
Division of Material Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
References (22)
Show source-provided references
1. Lewandowski M. ‘Environment-friendly renewable energy resources’, 2012, Warszawa, WNT.
2. Zieliński A. · J. Achiev. Mater. Manuf. Eng · 2012 · 55 · 403
3. Hernas A., and Dobrzański J. ‘Life-time and damage of boilers and steam turbines elements’, 2003, Gliwice, PL, Publishing House of the Silesian University of Technology.
4. Golański G. · Metallurgy · 2009 · 76 · 679
5. Dobrzański J. ‘Experience in the use of new steels for manufacturing of components of boilers for supercritical parameters’, ‘Report 1’, 51–60; 2009, Gliwice, PL, IMŻ.
6. 10.4028/www.scientific.net/AMR.278.46610.4028/www.scientific.net/AMR.278.466 ↗
7. Dobrzański J. · Open Access Library · 2011 · 3 · 1
8. 10.1361/1059949052403910.1361/10599490524039 ↗
9. 10.1016/j.matlet.2013.07.06010.1016/j.matlet.2013.07.060 ↗
10. 10.2478/amm-2014-023010.2478/amm-2014-0230 ↗
11. Viswanhatan R., Purgert R., and Rao U. ‘Materials technology for advanced coal power plants’. Proc. 1st Int. Conf. on ‘Super-high strength steels’, Rome, Italy, November 2005.
12. Kepa J. · J. Vibroeng · 2012 · 14 · 143
13. 10.1002/mawe.20140032510.1002/mawe.201400325 ↗
14. Zielinski A. · Mater. High Temp · 2015
15. 10.1515/amm-2015-025710.1515/amm-2015-0257 ↗
16. Erneman J. · Acta Mater · 2006 · 54 · 67
17. ‘Micrographic determination of the apparent grain size’, PN-EN ISO 643:2005.
18. Dobrzański J., Zieliński A., and Paszkowska H. ‘Estimation of residual life and time of further safe service illustrated with an example of the parent material and welded joint’, ‘Report 61/1’, 9–25; 2009, Gliwice, PL, IMŻ.
19. Zieliński A., Dobrzański J., Renowicz D., and Hernas A. ‘The estimation of residual life of low-alloy cast steel Cr–Mo–V type after long-term creep service’, Proc. 5th Int. Conf. on ‘Advances in materials technology for fossil power plants, ASM International 616–626; 2008.10.31399/asm.cp.am-epri-2007p0616 ↗
20. Dobrzański J., and Zieliński A. ‘Assessment of life time of power steels working above limit temperature based on abridged creep test’, Proc. 9th Int. Conf. on ‘Materials testing for the needs of power stations and power industry, Zakopane, PL 97–108; 2002.
21. ‘Standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes’. ASTM A213/A213M-11a.
22. ‘Metallic materials—method of test’, PN-EN ISO 204:2009.