journal article·2008-01

SEM/EBSD based in situ studies of deformation induced phase transformations in supermartensitic stainless steels

M. Karlsen, J. Hjelen, Ø Grong, G. Rørvik, R. Chiron, U. Schubert, E. Nilsen

Materials Science and Technology· Volume 24· Issue 1
Publisher page

Abstract

Recent year's equipment design has enabled the combination of in situ deformation tests with near real time electron backscatter diffraction (EBSD) mapping of the microstructure evolution in the scanning electron microscope (SEM). The present work involves studies of deformation induced phase transformations in supermartensitic steel containing ∼40 vol.-% retained austenite at room temperature. The martensite formation was initiated already at low strains, and increased gradually with increasing plastic strains up to ∼10%. It was observed that the martensite formed homogeneously within the microstructure, independent of the crystallographic orientations of the retained austenite. But no new martensite variants, besides those already present in the as received condition, did form during deformation. At the same time, the mutual distribution of these variants remained approximately constant throughout the deformation process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 10.1023/A:101797343259210.1023/A:1017973432592 ↗
2. Randle V. · Mater. Re · 2004 · 1
3. Ryde L. · Sci Technol · 2006 · 22 · 20
4. 10.1179/174328007X16025410.1179/174328007X160254 ↗
5. Goldstein J., Newbury D., Joy D., Lyman C., Echlin P., Lifshin E., Sawyer L., and Michael J. ‘Scanning electron microscopy and22. X-ray microanalysis’, 3rd edn; 2003, New York, Springer.23.10.1007/978-1-4615-0215-9 ↗
6. 10.1111/j.0022-2720.2004.01321.x10.1111/j.0022-2720.2004.01321.x ↗
7. Chiron R., Fryet J., and van der Lesegno P.: in ‘Local strain and24. temperature measurements in non-uniform fields at elevated25. temperatures’, (ed. Ziebs J. et al.), 149-158; 1996, Cambridge,26. Woodhead Publishing Limited.27.
8. 10.1046/j.1365-2818.2002.01061.x10.1046/j.1365-2818.2002.01061.x ↗
9. Oh S. T. · Sci Forum · 2002 · 408
10. 10.4028/www.scientific.net/MSF.408-412.57110.4028/www.scientific.net/MSF.408-412.571 ↗
11. 10.1016/j.ijmecsci.2003.11.00310.1016/j.ijmecsci.2003.11.003 ↗
12. Bjerkaas H., Fjeldbo S., Roven H. J., Hjelen J., Chiron R., and Furu T.: Matr.Sci Forum, 2006, 519-521,809–814.33.10.4028/www.scientific.net/MSF.519-521.809 ↗
13. Rfarvik G., Hesjevik S. M., and Mollan S.: Proc. Stainless Steel World Conf. & Expo, Maastricht, the Netherlands, November34. 2005, Stainless Steel World, Paper 5089.10.1016/S0262-1762(05)00537-7 ↗
14. Karlsen M., Grong O., Hjelen J., Rfarvik G., Chiron R., and Schubert U.: Unpublished work.
15. Karlsen M., Bjerkaas H., Chiron R., Roven H. J., and Hjelen J.:36. Proc. 16th Int. Microscopy Conf., Sapporo, Japan, September 37. 2006, Sapporo Convention Center, 661.38.
16. Enerhaug J. ‘A study of localized corrosion in supermartensitic stainless steel weldments’, PhD thesis, Norwegian University of39. Science and Technology, Trondheim, Norway, 2002.40.
17. Akselsen O. M. · 41. Weld 1 · 2004 · 160
18. Field D. P. · Ultramicroscopy · 1997 · 67 · 42
19. 10.1016/j.ultramic.2004.11.01210.1016/j.ultramic.2004.11.012 ↗
20. Bhadeshia H. K. D. H., and Honeycombe R. W. K. ‘Steels microstructure and properties’, 3rd edn; 2006, Oxford, Elsevier.10.1016/B978-075068084-4/50016-9 ↗
21. 10.1016/0001-6160(54)90102-910.1016/0001-6160(54)90102-9 ↗
22. 10.1007/BF0264441510.1007/BF02644415 ↗
23. Christian J. W. ‘Theory of transformations in metals and alloys’, 3rd edn; 2003, Oxford, Pergamon Press.10.1016/S1369-7021(03)00335-3 ↗
24. 10.1007/BF0139734610.1007/BF01397346 ↗
25. 10.1016/0001-6160(64)90176-210.1016/0001-6160(64)90176-2 ↗
26. Mackenzie J. K., and Bowles J. S.: Acta Metall. 1954, 2, 138–147.10.1016/0001-6160(54)90103-0 ↗
27. Roytburd A. L.: Mater.Sci Eng. A, 1999, A273—A275,1–10.10.1016/S0921-5093(99)00285-3 ↗
28. Verhoeven J. D. ‘Fundamentals of physical metallurgy’; 1975, New York, John Wiley & Sons.
29. Wechsler M. S. · Trans. AIME · 1953 · 197 · 1503
30. Kitahara H., Ueji R., Tsuji N., and Minamino Y.: Acta Mater. 2006, 54, 1279–1288.10.1016/j.actamat.2005.11.001 ↗
31. 10.1007/BF0059147310.1007/BF00591473 ↗
32. Bhadeshia H. K. D. H.: in ‘Mathematical modelling of weld phenomena’, (ed. H. Cerjak and H. K. D. H. Bhadeshia), 71-118; 1995, London, The Institute of Materials.
33. Gey N. · Metall Mater. Trans. A · 2006 · 36 · 329110.1007/s11661-005-0003-9 ↗
34. Han H. N., Lee C. G., Oh C. S., Lee T. H., and Kim S. J.: Acta Mater. 2004, 52, 5203–5214.10.1016/j.actamat.2004.07.031 ↗
35. 10.1016/j.scriptamat.2006.07.02110.1016/j.scriptamat.2006.07.021 ↗
36. 10.1016/0167-577X(91)90149-Z10.1016/0167-577X(91)90149-Z ↗
37. Olson G. B. · Metall Trans. A · 1976 · 7 · 1897
38. 10.1007/BF0264593410.1007/BF02645934 ↗
39. 10.1016/0001-6160(53)90083-210.1016/0001-6160(53)90083-2 ↗
40. Ray R. K. · Mater. Re · 1990 · 1
41. Ray R. K., Jonas J. J., Butron-Guillen M. P., and Savoie J.: ISIJ Int. 1994, 34, 927–942.10.2355/isijinternational.34.927 ↗
42. 10.1007/s11661-001-0346-910.1007/s11661-001-0346-9 ↗