journal article·2007-12

High temperature fatigue of friction welded joints in dissimilar nickel based superalloys

H. Y. Li, Z. W. Huang, S. Bray, G. Baxter, P. Bowen

Materials Science and Technology· Volume 23· Issue 12
Publisher page

Abstract

The high temperature fatigue performance of two dissimilar material joints made by inertia friction welding and linear friction welding is assessed in the present study. The fatigue strength of the welded joints is found to be comparable to that of the weaker parent material for the plainsided specimens. However, the fatigue crack growth resistance within the weld zone of both material systems is found to be reduced compared to that of parent material. This effect is more pronounced for high temperature Ni alloys than for the lower temperature nickel alloy. Environmental attack is confirmed to be the controlling failure mechanism for acceleration of crack growth, but the extent to which it is observed is sensitive to local microstructure, i.e. to grain size, redistribution of the main strengthening phase γ′, and to the grain boundary carbide morphology. Such local microstructural variations are the result of welding and subsequent post-weld heat treatment procedures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Wang K. K.: Weld Res. Council Bull,1975, (204), 1–22.
2. 10.1016/S0043-1648(98)00145-810.1016/S0043-1648(98)00145-8 ↗
3. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
4. 10.1111/j.1460-2695.2004.00793.x10.1111/j.1460-2695.2004.00793.x ↗
5. 10.1016/S0142-1123(03)00170-110.1016/S0142-1123(03)00170-1 ↗
6. 10.1111/j.1460-2695.1993.tb00767.x10.1111/j.1460-2695.1993.tb00767.x ↗
7. 10.1111/j.1460-2695.1994.tb00231.x10.1111/j.1460-2695.1994.tb00231.x ↗
8. 10.1046/j.1460-2695.1999.00160.x10.1046/j.1460-2695.1999.00160.x ↗
9. Hardy M. C., Zirbel B., Shen G., and Shankar R.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 83-90; 2004, Champion, PA, TMS.10.7449/2004/Superalloys_2004_83_90 ↗
10. 10.1007/s11661-002-0307-y10.1007/s11661-002-0307-y ↗
11. Preuss M., J. Quinta da Fonseca, I. Kyriakoglou, P. J. Withers and G. J. Baxter: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 485-492; 2004, Champion, PA, TMS.
12. Huang Z. W., Li H. Y., Preuss M., Karadge M., Bowen P., Bray S., and Baxter G.: Metall Mater. Trans. A, to be published.
13. Donachie M. J., Jr and S. J. Donachie: ‘Superalloys: a technique guide’, 2nd edn, 300; 2002, Materials Park, OH, ASM International.10.31399/asm.tb.stg2.9781627082679 ↗
14. 10.1016/j.materresbull.2004.08.00310.1016/j.materresbull.2004.08.003 ↗
15. 10.1016/S0142-1123(98)00087-510.1016/S0142-1123(98)00087-5 ↗
16. Yurek G. J. ‘Corrosion mechanisms’, (ed.Mansfeld F.), 472; 1987, New York, Marcel Dekker.
17. Kofstad P. ‘High temperature corrosion’; 1988, London, Elsevier Applied Science.
18. Birks N., and Meier G. H. ‘Introduction to high temperature oxidation of metals’, 198; 1983, London, Edward Arnold.
19. Molins R., Hochstetter G., Chassaigne J. C., and Andrieu E.: Acta Mater. 1996, 45, 663–674.10.1016/S1359-6454(96)00192-9 ↗
20. 10.1007/s11661-002-0302-310.1007/s11661-002-0302-3 ↗
21. 10.1179/174328407X24399710.1179/174328407X243997 ↗
22. Pint B. A., DiStefano J. R., and Wright I. G.: Metall Sci. Eng. A, 2006, A415,255–263.10.1016/j.msea.2005.09.091 ↗