New model for creep damage analysis and its application to creep crack growth simulations
Source abstract
Abstract
A creep damage model from the micromechanics viewpoint is presented in the paper. In order to mitigate the difficulty of calibrating many parameters in the existing damage evolution models, a simple creep ductility exhaustion approach is employed to account for the accumulation of the creep damage. Two-dimensional and three-dimensional numerical analyses of creep crack growth based on the new creep-damage model and/or Liu-Murakami model are carried out. When the damage parameter reaches a critical value, the load carrying capacity of each damaged element approaches zero and thus crack growth can be characterised by a completely damaged element zone ahead of the initial crack tip. The finite element simulation results obtained are compared favourably with experimental data for the compact tension specimen for 316 stainless steel and bending cracked plate for T91 steel at elevated temperatures. The comparisons show the excellent capability of the proposed model in predicting the crack growth rate and progressive crack profiles. In addition, the influences of the plasticity and mesh size are discussed in this paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Pressure Systems and Safety (Ministry of Education), School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77483-3123, USA
Department of Mechanical Engineering, University of Texas at Dallas, Richardson, TX 75080-3021, USA
References (27)
Show source-provided references
1. 10.1023/A:101867102200810.1023/A:1018671022008 ↗
2. Rabotnov Y.N. ‘Creep problems in structural members’; 1969, Amsterdam, North-Holland.
3. 10.1177/10567895950040030310.1177/105678959500400303 ↗
4. 10.1299/jsmea.41.5710.1299/jsmea.41.57 ↗
5. 10.1016/S0045-7825(99)00209-110.1016/S0045-7825(99)00209-1 ↗
6. 10.1177/030932471141301210.1177/0309324711413012 ↗
7. 10.1016/j.ijpvp.2010.09.00210.1016/j.ijpvp.2010.09.002 ↗
8. 10.1016/j.engfracmech.2010.03.04310.1016/j.engfracmech.2010.03.043 ↗
9. 10.1016/j.engfracmech.2010.06.01110.1016/j.engfracmech.2010.06.011 ↗
10. 10.1016/S0308-0161(03)00110-810.1016/S0308-0161(03)00110-8 ↗
11. 10.1016/j.engfracmech.2005.12.01210.1016/j.engfracmech.2005.12.012 ↗
12. 10.1016/j.engfracmech.2008.08.00110.1016/j.engfracmech.2008.08.001 ↗
13. 10.1016/j.engfracmech.2010.04.02410.1016/j.engfracmech.2010.04.024 ↗
14. Oh C.S., Kim N.H., Min S.H., and Kim Y.J. ‘Finite element damage analysis for predictions of creep crack growth’, Proc. ASME 2010 Pressure Vessels & Piping Division/K-PVP Conf., Washington, USA, July 2010.10.1115/PVP2010-25294 ↗
15. 10.1016/j.engfracmech.2011.08.01510.1016/j.engfracmech.2011.08.015 ↗
16. 10.1016/j.engfracmech.2012.12.01410.1016/j.engfracmech.2012.12.014 ↗
17. Manjoine M.J. · Weld J. · 1982 · 61 · 50
18. 10.1080/02619180.1988.1175338010.1080/02619180.1988.11753380 ↗
19. 10.1016/0013-7944(88)90258-510.1016/0013-7944(88)90258-5 ↗
20. 10.1016/j.ijpvp.2010.08.00810.1016/j.ijpvp.2010.08.008 ↗
21. Li Y.G. ‘Study on creep damage in thick welded joint of mod.9Cr-1Mo steel plates’, PhD thesis, Kochi University of Techonology, Kochi, 2009.10.1016/j.jnucmat.2010.07.033 ↗
22. Chaouadi R. ‘Flow and fracture behavior of 9 Cr-ferritic/martensitic steels’, SCK-CEN-R-4122, SCK-CEN, Boeretang, Belgium, 2005.
23. ABAQUS: Version 6·9-EF. 2009, Providence, Dassault Systèmes.
24. 10.1111/j.1460-2695.2004.00755.x10.1111/j.1460-2695.2004.00755.x ↗
25. 10.1016/0308-0161(95)00094-110.1016/0308-0161(95)00094-1 ↗
26. 10.1016/0308-0161(95)00096-810.1016/0308-0161(95)00096-8 ↗
27. 10.1016/j.ijpvp.2003.11.01010.1016/j.ijpvp.2003.11.010 ↗