Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces
Source abstract
Abstract
An overlapping composite track coating was produced on a steel surface by preplacing a 0·5 mm thick layer of TiC powder and then melting using a tungsten inert gas torch of constant energy input. The influence of the overlapping operation on preheating of the substrate, the dissolution of TiC particulates and the subsequent depth and hardness of the composite layer was analysed. The melt microstructure consisted of both undissolved and partially dissolved TiC particulates, together with a variety of morphologies and sizes of TiC particles precipitated during solidification. Preheating, resulting from the overlapping operation, occurred, producing additional melting of the TiC particulates and deeper melt depths but with a reduced volume fraction of TiC precipitates in the subsequent tracks. A maximum hardness of over 800 HV was developed in the composite layer. The high hardness was unevenly distributed in tracks melted at the initial and final stages, while it varied across the melt depths in other tracks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advanced Materials and Surface Engineering Research Unit, Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, PO Box 10, Kuala Lumpur 50725, Malaysia
Department of Mechanical and Aerospace Engineering, University of Strathclyde, Glasgow G1 1XJ, UK
References (44)
Show source-provided references
1. 10.1016/0921-5093(94)91022-710.1016/0921-5093(94)91022-7 ↗
2. 10.1016/j.matdes.2010.04.02610.1016/j.matdes.2010.04.026 ↗
3. 10.1016/j.wear.2008.01.00410.1016/j.wear.2008.01.004 ↗
4. 10.1016/j.surfcoat.2003.10.13210.1016/j.surfcoat.2003.10.132 ↗
5. 10.1016/S0921-5093(01)01394-610.1016/S0921-5093(01)01394-6 ↗
6. 10.1007/BF0074411010.1007/BF00744110 ↗
7. 10.1016/j.jmatprotec.2006.03.11010.1016/j.jmatprotec.2006.03.110 ↗
8. 10.1016/j.surfcoat.2007.08.02110.1016/j.surfcoat.2007.08.021 ↗
9. 10.1016/j.surfcoat.2007.12.03910.1016/j.surfcoat.2007.12.039 ↗
10. 10.4028/www.scientific.net/AMR.179-180.75710.4028/www.scientific.net/AMR.179-180.757 ↗
11. Baker TN: in ‘Surface engineering of light alloys – aluminium, magnesium and titanium alloys’, (ed. Dong H), 398–443; 2010, Oxford, Wood Publishing Ltd.10.1533/9781845699451.2.398 ↗
12. 10.1016/S0257-8972(99)00141-310.1016/S0257-8972(99)00141-3 ↗
13. 10.1016/S0043-1648(00)00444-010.1016/S0043-1648(00)00444-0 ↗
14. 10.1016/S1359-6462(01)00675-310.1016/S1359-6462(01)00675-3 ↗
15. 10.1016/S0257-8972(03)00811-910.1016/S0257-8972(03)00811-9 ↗
16. 10.1007/BF0265014010.1007/BF02650140 ↗
17. 10.1179/sur.1997.13.3.25710.1179/sur.1997.13.3.257 ↗
18. 10.1179/02670849910151653310.1179/026708499101516533 ↗
19. 10.1016/S0924-0136(01)00609-410.1016/S0924-0136(01)00609-4 ↗
20. 10.1016/j.apsusc.2005.02.08810.1016/j.apsusc.2005.02.088 ↗
21. 10.1016/j.jmatprotec.2005.02.24710.1016/j.jmatprotec.2005.02.247 ↗
22. 10.1016/j.jallcom.2006.03.08310.1016/j.jallcom.2006.03.083 ↗
23. 10.1016/j.msea.2006.06.01510.1016/j.msea.2006.06.015 ↗
24. 10.1016/j.surfcoat.2006.10.04210.1016/j.surfcoat.2006.10.042 ↗
25. 10.4028/www.scientific.net/AMR.97-101.137710.4028/www.scientific.net/AMR.97-101.1377 ↗
26. 10.4028/www.scientific.net/MSF.675-677.78310.4028/www.scientific.net/MSF.675-677.783 ↗
27. 10.3844/ajassp.2010.815.82210.3844/ajassp.2010.815.822 ↗
28. 10.4028/www.scientific.net/AMR.264-265.141510.4028/www.scientific.net/AMR.264-265.1415 ↗
29. Mridha S · Adv. Mat. Res. · 2011 · 264 · 1421
30. 10.4028/www.scientific.net/AMR.264-265.142710.4028/www.scientific.net/AMR.264-265.1427 ↗
31. 10.4028/www.scientific.net/AMR.264-265.143310.4028/www.scientific.net/AMR.264-265.1433 ↗
32. 10.4028/www.scientific.net/AMR.445.65510.4028/www.scientific.net/AMR.445.655 ↗
33. Mridha S · IJMME · 2012 · 7 · 48
34. 10.4028/www.scientific.net/AMR.576.46710.4028/www.scientific.net/AMR.576.467 ↗
35. 10.4028/www.scientific.net/AMR.576.46310.4028/www.scientific.net/AMR.576.463 ↗
36. 10.2351/1.474524110.2351/1.4745241 ↗
37. Morton PH, Bell T, Weisheit A, Kroll J and Mordike BL: in ‘Surface modification technologies V’, (ed. Sudarshan T S and Braza J F), 593–609; 1992, London, Institute of Materials.
38. 10.1016/S0924-0136(99)00088-610.1016/S0924-0136(99)00088-6 ↗
39. 10.1016/S0921-5093(98)01135-610.1016/S0921-5093(98)01135-6 ↗
40. 10.1016/S0924-0136(03)00814-810.1016/S0924-0136(03)00814-8 ↗
41. 10.1179/174328407X22656310.1179/174328407X226563 ↗
42. Easterling KE: ‘Introduction to physical metallurgy of welding’; 1992, London, Butterworth-Heinemann.
43. 10.1016/0921-5093(91)90760-K10.1016/0921-5093(91)90760-K ↗
44. Patel P · Mater. Sci. Technol. · 30 · 150610.1179/1743284713Y.0000000481 ↗