journal article·1991-04

Design of powder metallurgy aluminium alloys for applications at elevated temperatures Part 1 Microstructure of high pressure gas atomized powders

N. J. E. Adkins, P. Tsakiropoulos

Publisher page

Abstract

A method is described for designing powder metallurgy rapidly solidified aluminium alloys using experimental and/or calculated nucleation maps which give the microstructure of gas atomised powders as a function of powder particle size and alloy composition. This method was used to predict the compositions of Al–Cr–Zr–Mn alloys for which the <45 μm sizefraction of the gas atomised powders exhibits a microstructure with or without Al13Cr2 intermetallic particles. Powders were produced by high pressure gas atomisation and were examined using analytical electron microscopy. The microstructures observed were in excellent agreement with those predicted. The powders exhibited four distinct microstructures with increasing powder particle diameter: (i) segregation free, (ii) cellular α aluminium, (iii) α aluminium plus fine spherical precipitates rich in chromium and manganese, and (iv) α aluminium plus Al13Cr2 primary intermetallic particles. The solidification of these powders is discussed in terms of solidification front velocity controlled by external heat flow and by the initial undercooling. Particles less than 10 μm in diameter undercool significantly before solidification. Segregation free microstructures occur in the fine <1 μm) particles, where the solidification front velocity exceeds the absolute stability velocity.MST/1247a
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. GRANT N. J. · NATO Series E
2. R. J. H. WANHILL and L. SCHRA: in ‘Rapidly solidifed powder aluminum alloys’, STP 890, (ed. M. E. Fine and E. A. Starke, Jr), 464; 1986, Philadelphia, PA, ASTM.10.1520/STP33045S ↗
3. H. JONES: in ‘Processing of structural materials by rapid solidification’, (ed. F. H. Froes and S. J. Savage), 77; 1987, Metals Park, OH, ASM International.
4. 10.4028/www.scientific.net/KEM.29-31.78310.4028/www.scientific.net/KEM.29-31.783 ↗
5. 10.1016/0025-5416(88)90138-310.1016/0025-5416(88)90138-3 ↗
6. N. J. E. ADKINS: PhD thesis, University of Surrey, 1989.
7. 10.1179/mst.1986.2.4.39410.1179/mst.1986.2.4.394 ↗
8. MILLER W. S. · European Patent 0 105 595, Alcan International Ltd, Banbury, 1984
9. ADKINS N. J. E. · Int. J. Rapid Solidification
10. ADKINS N. J. E. · Int. J. Rapid Solidification
11. 10.1179/mst.1989.5.6.60910.1179/mst.1989.5.6.609 ↗
12. R. CLIFT, J. R. GRACE, and M. E. WEBER: ‘Bubbles, drops and particles’; 1978, New York, Academic Press.
13. RANZ W. E. · Chem. Eng. Prog., · 1952 · 48 · 173
14. LIU J. · Powder Metall., · 1988 · 20 · 17
15. 10.1007/BF0264385310.1007/BF02643853 ↗
16. P. B. PRAGNELL: unpublished research, University of Surrey, 1986.
17. H. JONES: ‘Rapid solidification of metals and alloys’, Monograph no. 8; 1982, London, The Institution of Metallurgists.
18. BACKMARK U. · Powder Metall., · 1986 · 18 · 338
19. 10.1016/0036-9748(87)90099-810.1016/0036-9748(87)90099-8 ↗
20. 10.1063/1.171333310.1063/1.1713333 ↗
21. S. R. CORIELL and R. E SEKERKA: in ‘Rapid solidification processing: principles and technologies II’, (ed. R. Mehrabian et al.), 35; 1980, Baton Rouge, LA, Claitors Publishing Division.
22. 10.1016/0001-6160(87)90255-010.1016/0001-6160(87)90255-0 ↗
23. S. P. MIDSON and H. JONES: in ‘Rapidly quenched metals IV’, (ed. T. Masumoto and K. Suzuki), 1539; 1981, Sendai, The Japan Institute of Metals.
24. 10.1016/0022-0248(78)90008-810.1016/0022-0248(78)90008-8 ↗
25. L. F. MONDOLFO: ‘Aluminium alloys: structure and properties’, 1976, London, Butterworth.10.1016/B978-0-408-70932-3.50008-5 ↗
26. EREMENKO V. N. · Russ. Metall., · 1981 · 6 · 204
27. LIU P. · Int. J. Rapid Solidification · 1987 · 3 · 147