journal article·2012-07

Modelling of entire friction stir welding process by explicit finite element method

M Yu, W Y Li, J L Li, Y J Chao

Materials Science and Technology· Volume 28· Issue 7
Publisher page

Abstract

A coupled thermomechanical three-dimensional finite element model was developed for friction stir welding in the ABAQUS environment using Johnson–Cook material law and Johnson–Cook failure model. The temperature evolution during the plunge, dwell and moving stages of a friction stir welded 7050 aluminium alloy and the effect of heat conduction by the back plate were investigated. Results show that the temperature almost symmetrically distributes across the plate cross-section, and the temperature contour in the weld nugget zone presents a V type shape after the plunge stage. In the dwell stage, the frictional heat conducts around to preheat the plate. While in the moving stage, the heat gradually accumulates until a quasi-stable temperature field is formed. Moreover, it is shown that the heat conduction through the back plate has a significant effect on the temperature field. With the increasing heat convective coefficient of the back plate, the temperature field remarkably shrinks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Solidification Processing, Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi'an 710072, China

LERMPS, Université de Technologie de Belfort-Montbéliard, Site de Sévenans, Belfort Cedex 90010, France

Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA

References (17)

Show source-provided references
1. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
2. 10.1016/S0890-6955(02)00114-110.1016/S0890-6955(02)00114-1 ↗
3. 10.1179/13621710322501094310.1179/136217103225010943 ↗
4. 10.1016/S0890-6955(03)00158-510.1016/S0890-6955(03)00158-5 ↗
5. 10.1088/0965-0393/13/1/00610.1088/0965-0393/13/1/006 ↗
6. 10.1016/j.ijmachtools.2005.02.00810.1016/j.ijmachtools.2005.02.008 ↗
7. 10.1179/174329307X17791910.1179/174329307X177919 ↗
8. 10.1016/j.matdes.2008.05.02910.1016/j.matdes.2008.05.029 ↗
9. Dawes CJ · Weld. J. · 1996 · 75 · 41
10. 10.1016/j.jmatprotec.2007.10.06710.1016/j.jmatprotec.2007.10.067 ↗
11. 10.4028/www.scientific.net/MSF.620-622.23310.4028/www.scientific.net/MSF.620-622.233 ↗
12. Fu XL · J. Wuhan Univ. Technol. (China) · 2006 · 28 · 113
13. Wu G, Yao LJ, Li ZX: ‘Aluminum and aluminum metal alloy material manual’; 1994, Beijing, Science Press.
14. LeseurDR: ‘Experimental investigations of material models for Ti–6Al–4V titanium and 2024-T3 aluminum’, Report DOT/FAA/AR-00/25, US Department of Transportation Federal Aviation Administration, Washington, DC, USA, 2000.10.2172/11977 ↗
15. Kay G: ‘Failure modeling of titanium 6Al–4V and aluminum 2024-T3 with the Johnson–Cook material model’, Report DOT/FAA/AR-03/57, US Department of Transportation Federal Aviation Administration, Washington, DC, USA, 2000.
16. 10.1106/LTKR-JFBM-RGMV-WVCF10.1106/LTKR-JFBM-RGMV-WVCF ↗
17. 10.1179/174329306X10209310.1179/174329306X102093 ↗