journal article·2010-12

Three-stage model for nucleation of graphite in grey cast iron

I. Riposan, M. Chisamera, S. Stan, C. Hartung, D. White

Materials Science and Technology· Volume 26· Issue 12
Publisher page

Abstract

A three-stage model for the nucleation of graphite in grey irons has been proposed. Stage 1 involves formation of small oxide based sites (usually <2·0 μm) in the melt. Stage 2 involved precipitation of complex (Mn,X)S compounds (usually <5·0 μm) nucleated by stage 1 microinclusions. Finally, in stage 3, graphite nucleates on the sides of the (Mn,X)S compounds, which have low crystallographic misfit with graphite. Three groups of elements are important to sustain this sequence for effective graphite nucleation. These are strong deoxidising elements, such as Al and Zr, to form a high count of very small stage 1 microinclusions, Mn and S to sustain MnS type sulphide formation, and inoculating elements, which act in the first stage and/or in the second stage of the graphite nucleation sequence. Inoculating elements improve the capability of (Mn,X)S compounds to nucleate graphite. In inoculated irons, the (Mn,X)S compounds are more complex. They have a lower Mn/S ratio and higher capability to nucleate graphite, especially when preconditioning/inoculating elements contribute with a high count of effective stage 1 particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Politehnica University of BucharestBucharest RO-060042, Romania

Elkem AS Foundry Products Division, N-4675 Kristiansand, Norway

Elkem Metals Inc.Pittsburgh, PA, USA

References (22)

Show source-provided references
1. Chisamera M., Riposan I., Stan S., Ecob C., Grasmo G., and Wilkinson D.: Proc. AFS Int. Cast Iron Melting Conf., Orlando, FL, USA, February 2009, AFS, Paper 02.
2. Riposan I., Chisamera M., Stan S., Grasmo G., Hartung C., and White D.: AFS Trans. 2009, 117, 423–434.
3. Loper C. R. · Proc. AFS Int. Inoculation Conf., Rosemont, IL, USA, April 1998, AFS, Paper 01.
4. Loper C. R.Jr: AFS Trans. 1999, 107, 523–528.10.1111/j.1699-0463.1999.tb01588.x ↗
5. Stefanescu D. M.: Proc. AFS Int. Inoculation Conf., Rosemont, IL, USA, April 1998, AFS, Paper 16.
6. Chisamera M., Riposan I., and Barstow M.: Proc. AFS Int. Inoculation Conf., Rosemont, IL, USA, April 1998, AFS, Paper 03.
7. 10.1007/BF0264860510.1007/BF02648605 ↗
8. Chisamera M., Riposan I., Stan S., and Skaland T.: Proc. 64th World Foundry Cong., Paris, France, September 2000, WFO, Paper RO-062.
9. Jianzong L.: AFS Trans. 1989, 97, 31–34.10.1016/0091-2182(89)90038-4 ↗
10. Guoging X., Zongsen Y., and Mobley C. E.: AFS Trans. 1982, 90, 943–958.
11. Rong De L., and Xiang Y. J.: AFS Trans. 1991, 99, 707–712.
12. Riposan I., Chisamera M., Stan S., Skaland T., and Onsoien M. I.: AFS Trans. 2001, 109, 1151–1162.
13. 10.1080/13640461.2003.1181956710.1080/13640461.2003.11819567 ↗
14. Riposan I., Chisamera M., Stan S., Gadarautanu C., and Skaland T.: Proc. 66th World Foundry Cong., Istanbul, Turkey, September 2004, WFO,775–790.
15. Riposan I. · Proc. AFS Conf. on ‘Cast iron inoculation’, Schaumburg, IL, USA, September 2005, AFS, · 31
16. 10.1007/s11665-008-9260-210.1007/s11665-008-9260-2 ↗
17. Riposan I., Chisamera M., Stan S., Toboc P., and Ecob C.: Proc. 68th World Foundry Cong., Chennai, India, February 2008, WFO/ Institute of Indian Foundrymen, Paper 53.
18. 10.1179/174328408X29884210.1179/174328408X298842 ↗
19. Hartung C. · Cast. Plant Technol. Int · 2008 · 2 · 18
20. Oikawa K., Ishide K., and Nishizawa T.: ISIJ Int. 1997, 37, (4), 332–338.10.2355/isijinternational.37.332 ↗
21. Sawai T., Wakoh M., Ueshima Y., and Mizoguchi S.: Proc. 6th Int. Iron and Steel Cong., Nagoya, Japan, October 1990, ISIJ,605–611.
22. Wakoh M., Sawai T., and Mizoguchi S.: ISIJ Int. 1996, 36, (8), 1014–1021.10.2355/isijinternational.36.1014 ↗