journal article·2019-12

Microstructure and mechanical properties of laser metal deposited AlSi10Mg alloys

Xian Wang, Liqun Li, Jingyu Qu, Wang Tao

Materials Science and Technology· Volume 35· Issue 18
Publisher page

Abstract

Thin-walled specimens with more than 150 layers were deposited by laser metal deposition without cracks and concaving deformation. The microstructure in each layer could be divided into three zones according to the morphology. The homogeneity deteriorated with the rising of the input. The tensile strength dropped 29.7% when the porosity increased from 0.53% to 1.88%. Controlling the oxygen under 0.5% and optimising the heat input, the as-built tensile strength reached 360 MPa. The fracture elongation was enhanced from 3.9% to 12.7% when the heat input was increased from 480 to 1200 W. The decrease of the secondary dendrite arm spacing and the change of fracture mechanism is the main reason leading to the strengthening of the mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, People's Republic of China

References (34)

Show source-provided references
1. 10.1007/s00170-012-4558-510.1007/s00170-012-4558-5 ↗
2. Smit LJ · 2009
3. 10.1016/j.actamat.2014.12.05410.1016/j.actamat.2014.12.054 ↗
4. 10.1179/1362171815Y.000000005010.1179/1362171815Y.0000000050 ↗
5. 10.1016/j.addma.2014.12.00810.1016/j.addma.2014.12.008 ↗
6. 10.1016/j.jmst.2014.09.02010.1016/j.jmst.2014.09.020 ↗
7. 10.3390/ma1101001710.3390/ma11010017 ↗
8. 10.1038/nature2389410.1038/nature23894 ↗
9. 10.1016/j.actamat.2012.11.05210.1016/j.actamat.2012.11.052 ↗
10. ASTM B85/B85M−14. Standard specification for aluminium-alloy die casting. West Conshohocken (PA); 2014. https://www.astm.org/.
11. 10.1016/j.phpro.2012.10.05910.1016/j.phpro.2012.10.059 ↗
12. 10.1007/s13632-014-0168-y10.1007/s13632-014-0168-y ↗
13. 10.1179/1743284714Y.000000070210.1179/1743284714Y.0000000702 ↗
14. 10.1016/j.msea.2016.03.08810.1016/j.msea.2016.03.088 ↗
15. 10.1080/02670836.2017.139851310.1080/02670836.2017.1398513 ↗
16. 10.1016/j.ijfatigue.2019.02.04010.1016/j.ijfatigue.2019.02.040 ↗
17. 10.1080/02670836.2019.158974010.1080/02670836.2019.1589740 ↗
18. 10.1080/00150193.2018.139214710.1080/00150193.2018.1392147 ↗
19. 10.1016/j.ijleo.2018.10.11210.1016/j.ijleo.2018.10.112 ↗
20. 10.1016/j.surfcoat.2011.09.05110.1016/j.surfcoat.2011.09.051 ↗
21. 10.1007/s11666-016-0495-410.1007/s11666-016-0495-4 ↗
22. 10.5781/JWJ.2017.35.4.1010.5781/JWJ.2017.35.4.10 ↗
23. 10.1016/j.procir.2018.08.06310.1016/j.procir.2018.08.063 ↗
24. 10.1007/s11661-012-1560-310.1007/s11661-012-1560-3 ↗
25. 10.1016/S0925-8388(99)00062-610.1016/S0925-8388(99)00062-6 ↗
26. Miguel GM. AlSi10Mg parts produced by selective laser melting (slm). KU Leuven. Erasmus Stage/Universidad Carlos III de Madrid; 2013.
27. 10.1016/j.msea.2017.11.07810.1016/j.msea.2017.11.078 ↗
28. 10.1016/j.vacuum.2019.05.01110.1016/j.vacuum.2019.05.011 ↗
29. 10.1016/j.matdes.2015.06.17710.1016/j.matdes.2015.06.177 ↗
30. 10.1149/1.242857510.1149/1.2428575 ↗
31. 10.1016/j.msea.2018.08.00310.1016/j.msea.2018.08.003 ↗
32. 10.1016/0013-7944(73)90007-610.1016/0013-7944(73)90007-6 ↗
33. 10.1016/j.actamat.2019.06.01310.1016/j.actamat.2019.06.013 ↗
34. 10.1016/j.procir.2018.08.06310.1016/j.procir.2018.08.063 ↗