journal article·2014-04

Austenite grain growth modelling in weld heat affected zone of Nb/Ti microalloyed linepipe steel

G. Khalaj, H. Yoozbashizadeh, A. Khodabandeh, M. Tamizifar

Materials Science and Technology· Volume 30· Issue 4
Publisher page

Abstract

A model to predict the austenite grain size in an Nb/Ti microalloyed steel weld heat affected zone (HAZ) was developed. The present work investigates grain growth behaviour under the influence of pinning carbonitrides. The steel has been subjected to austenitising heat treatments to selected peak temperatures at various heating rates that are typical for thermal cycles in the HAZ. The effect of temperature and heating rate on the grain size is studied. A model is proposed for the dissolution of NbCN precipitates. This model has been coupled to an austenite grain growth model in the presence of pinning particles. This coupling leads to accurate prediction of the austenite grain size along the heating path simulating selected thermal profiles of the HAZ.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering Science and Research Branch, Islamic Azad University, Tehran, Iran

References (35)

Show source-provided references
1. Guthrie R. I. L., and Jonas J. J. ‘ASM handbook: properties and selection: irons, steels and high performance alloys’, 10th edn, Vol. 1, 115–116; 1990, Materials Park, OH, ASM International.
2. 10.1007/BF0259543310.1007/BF02595433 ↗
3. Gladman T. ‘The physical metallurgy of microalloyed steels’; 1996, London, IOM Communications.
4. 10.2355/isijinternational.38.91310.2355/isijinternational.38.913 ↗
5. Bhadeshia H. K. D. H., and Honeycombe R. W. K. ‘Steels microstructure and properties’; 2006, Oxford, Elsevier.10.1016/B978-075068084-4/50016-9 ↗
6. Pickering F. B. · J. Iron Steel Inst. · 1967 · 205 · 653
7. 10.1016/0001-6160(81)90007-910.1016/0001-6160(81)90007-9 ↗
8. 10.1016/0001-6160(88)90053-310.1016/0001-6160(88)90053-3 ↗
9. 10.1016/0956-7151(94)00488-410.1016/0956-7151(94)00488-4 ↗
10. 10.2355/isijinternational.32.41410.2355/isijinternational.32.414 ↗
11. 10.2355/isijinternational.32.42310.2355/isijinternational.32.423 ↗
12. 10.2355/isijinternational.39.27110.2355/isijinternational.39.271 ↗
13. 10.1016/0001-6160(82)90100-610.1016/0001-6160(82)90100-6 ↗
14. 10.1016/0001-6160(84)90176-710.1016/0001-6160(84)90176-7 ↗
15. 10.1016/S0921-5093(02)00632-910.1016/S0921-5093(02)00632-9 ↗
16. 10.1016/S1359-6454(02)00398-110.1016/S1359-6454(02)00398-1 ↗
17. 10.4028/www.scientific.net/MSF.467-470.92910.4028/www.scientific.net/MSF.467-470.929 ↗
18. 10.1016/0001-6160(86)90125-210.1016/0001-6160(86)90125-2 ↗
19. 10.1016/j.msea.2006.12.07310.1016/j.msea.2006.12.073 ↗
20. 10.1179/174328406X8409410.1179/174328406X84094 ↗
21. 10.1007/s11661-010-0376-210.1007/s11661-010-0376-2 ↗
22. 10.1016/j.actamat.2011.11.01610.1016/j.actamat.2011.11.016 ↗
23. 10.1007/BF0265805110.1007/BF02658051 ↗
24. Hellman P. · Scand. J. Metall. · 1975 · 4 · 211
25. 10.1016/B978-008044164-1/50011-610.1016/B978-008044164-1/50011-6 ↗
26. 10.1016/0001-6160(65)90200-210.1016/0001-6160(65)90200-2 ↗
27. Zener C. · Trans. AIME · 1948 · 175 · 15
28. 10.1016/0001-6160(87)90280-X10.1016/0001-6160(87)90280-X ↗
29. 10.2355/isijinternational.44.123010.2355/isijinternational.44.1230 ↗
30. 10.1016/j.actamat.2007.12.05010.1016/j.actamat.2007.12.050 ↗
31. 10.1016/j.scriptamat.2004.12.02610.1016/j.scriptamat.2004.12.026 ↗
32. Sparke B. · J. Iron Steel Inst. · 1965 · 203 · 152
33. Irvine K. J. · J. Iron Steel Inst. · 1967 · 205 · 161
34. Easterling K. ‘Introduction to the physical metallurgy of welding’; 1992, Oxford, Butterworth-Heinemann.
35. Fazeli F. · J. Iron Steel Inst. · 2011 · 18 · 658