journal article·2011-06

On mechanism of flow softening in Ti–5Al–5Mo–5V–3Cr

N G Jones, M Jackson

Materials Science and Technology· Volume 27· Issue 6
Publisher page

Abstract

The flow behaviour of Ti–5Al–5Mo–5V–3Cr with an initial microstructure containing acicular α platelets has been characterised during isothermal subtransus forging. Flow softening was observed, following yielding and limited hardening, for all investigated temperatures and strain rates, before a steady state flow regime being reached at a strain of ∼0·5. The acicular α plates were found to have been fragmented by the forging process, which is concurrent with previous findings. The flow behaviour of the fully retained β phase below the β transus temperature has been established and found to be similar to that of the steady state flow of platelet α in a β matrix. Forging the acicular α microstructure to low strains resulted in higher dislocation concentrations in the β matrix than could be observed in the α precipitates, supporting the hypothesis of hardening through dislocation impedance. Evidence of fragmentation via a pinch-off mechanism was found where slip was observed to have been transmitted across an α plate. Thus following yield the flow behaviour is dominated by the pile-up of dislocations at the α/ β interface before the transmission of slip leads to plate fragmentation resulting in flow softening to a steady state regime governed entirely by the β matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Imperial College London, Prince Consort Road, London, SW7 2BP, UK

Department of Engineering Materials University of Sheffield, Mappin Street, Sheffield, S1 3JD, UK

References (31)

Show source-provided references
1. Boyer RR · J. Met. · 1992 · 44 · 23
2. Lutjering G, Williams JC: ‘Titanium’, 2nd edn, 2–14; 2007, Berlin, Springer-Verlag.
3. Eylon D, SeagleSR: ‘State of titanium in the USA – the first 50 Years’, Proc. Titanium ’99, Saint-Petersburg, Russia, 2000, CRISM ‘Prometey’; 37–47.
4. Duerig TW, Williams JC: ‘Overview: microstructure and properties of beta titanium alloys’, Proc. Beta Titanium Alloys in the 1980s, Altanta, GA, USA, April 1984, The Metallurgical Society of AIME, 19–67.
5. Terlinde G, Fischer G: ‘Beta titanium alloys’, Proc. Titanium ’95: science and technology, 2177–2194; 1995, London, The Institute of Materials.
6. 10.1016/S0921-5093(97)00783-110.1016/S0921-5093(97)00783-1 ↗
7. Chen CC · J.Met. · 1979 · 31 · 33
8. Boyer RR · J. Met · 1980 · 32 · 61
9. 10.1016/S0921-5093(01)01531-310.1016/S0921-5093(01)01531-3 ↗
10. 10.1016/S0921-5093(98)01156-310.1016/S0921-5093(98)01156-3 ↗
11. 10.1016/S1359-6454(01)00236-110.1016/S1359-6454(01)00236-1 ↗
12. 10.1007/s11661-001-0155-110.1007/s11661-001-0155-1 ↗
13. 10.1007/s11661-001-0166-y10.1007/s11661-001-0166-y ↗
14. 10.1007/s11661-999-0232-410.1007/s11661-999-0232-4 ↗
15. Weiss I, Welsch GE, Froes FH, Eylon D: ‘Mechanisms of microstructural refinement in Ti–6Al–4V alloy’, Proc. Titanium ’84: science and technology, 1503–1510; 1984, Oberursel, DGM e.V.
16. Rack HJ, Wang A: ‘High temperature flow localization in coarse grain Widmanstätten Ti–6Al–4V’, Proc. Titanium ’92: science and technology, 1379–1386; 1993, Warrendale, PA, The Minerals Metals & Materials Society.
17. 10.1016/j.msea.2008.09.07110.1016/j.msea.2008.09.071 ↗
18. 10.1007/s11661-009-9866-510.1007/s11661-009-9866-5 ↗
19. 10.1179/02670830010150743310.1179/026708300101507433 ↗
20. 10.1007/s11661-005-0223-z10.1007/s11661-005-0223-z ↗
21. 10.1016/j.msea.2008.01.05510.1016/j.msea.2008.01.055 ↗
22. Fanning J, Nyakana S, Patterson K, McDaniel R: ‘Heat treatment, microstructure and properties of TIMETAL 555’, Proc. Titanium 2007: science and technology, 499–502; 2007, Sendai, The Japan Institute of Metals.
23. 10.1007/BF0267232710.1007/BF02672327 ↗
24. Srinivasan R, Weiss I: ‘High temperature deformation of the near beta Ti–15V–3Cr–3Sn–3Al alloy’, Beat titanium alloys in the 1990's, 283–295; 1993, Warrendale, PA, The Minerals, Metals and Materials Society.10.1016/0956-716X(92)90418-E ↗
25. Sellars CM · Memoires Scientifiques de la Revue de Metallurgie · 1966 · 63 · 73110.1051/metal/196663090731 ↗
26. Cotton JD, Boyer RR, Briggs RD, Baggerly RG, Meyer CA, Carter MD, Wood W, Tewksbury G, Li V, Yao X: ‘Phase transformations in Ti–5Al–5Mo–5V–3Cr–0·5Cr’, Proc. Titanium 2007: science and technology, 471–474; 2007, Sendai, The Japan Institute of Metals.
27. Clement N · J. Met · 2007 · 59 · 50
28. 10.1016/j.scriptamat.2008.12.01010.1016/j.scriptamat.2008.12.010 ↗
29. Long M, Rack HJ: ‘High temperature discontinuous yielding in beta-phase Ti3Al– (Nb, V, Mo) alloys’, Proc. Titanium ’95: science and technology, 316–323; 1995, London, The Institute of Materials.
30. Vijayshankar MN, Ankem SA: ‘High temperature deformation behavior of α, α–β and β titanium alloys’, Proc. Titanium ’92: science and technology, 1733–1740; 1993, Warrendale, PA, The Minerals Metals & Materials Society.
31. Margolin H, Cohen P: ‘Evolution of the equiaxed morphology of phases in Ti–6Al–4V’, Proc. Titanium ’80: science and technology, 1555–1561; 1980, Warrendale, PA, The Metallurgical Society of AIME.