journal article·2013-07

Oxidation behaviour of cast Ni–Cr alloys in steam at 800°C

E Essuman, L R Walker, P J Maziasz, B A Pint

Materials Science and Technology· Volume 29· Issue 7
Publisher page

Abstract

To evaluate the steam oxidation resistance of cast Ni base alloy candidates for advanced steam turbine casings, laboratory experiments were conducted at 800°C. Alloys ranged from weaker, solid solution strengthened alloys 230 and 625 to stronger, precipitation strengthened alloys 105, 263 and 740, which are more difficult to fabricate and join. In general, these Ni–Cr based alloys exhibit low mass gains and form thin, protective Cr rich external oxides in 17 bar steam or 1 bar air. However, Al and Ti in these alloys internally oxidise in all cases. After 5000 h exposures, the average and maximum internal oxide penetration depths were measured, and the values were ranked based on the alloy Al+Ti contents. The middle range of Al+Ti compositions investigated, such as for alloys 617, 263, 282 and 740, showed the deepest penetrations. Further characterisation of the reaction products by electron microprobe showed a complex behaviour including significant Ti incorporation into the scale formed in both steam and air, and Ti rich oxide at both the gas and metal interfaces. Based on the Al and Ti contents, the internal oxidation observed in these alloys in steam was atypical.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Oak Ridge National Laboratory 1 Bethel Valley Road, Oak Ridge, TN 37831-6156, USA

References (39)

Show source-provided references
1. 10.1361/1059949052403910.1361/10599490524039 ↗
2. Viswanathan R · Power · 2010 · 154 · 41
3. 10.1149/1.242593210.1149/1.2425932 ↗
4. 10.1002/maco.1970021110510.1002/maco.19700211105 ↗
5. 10.4028/www.scientific.net/MSF.251-254.55110.4028/www.scientific.net/MSF.251-254.551 ↗
6. 10.1016/j.corsci.2008.08.02410.1016/j.corsci.2008.08.024 ↗
7. 10.1149/1.315544210.1149/1.3155442 ↗
8. 10.1179/095066010X1264689872816510.1179/095066010X12646898728165 ↗
9. 10.1023/A:100464231097410.1023/A:1004642310974 ↗
10. 10.4028/www.scientific.net/MSF.461-464.76510.4028/www.scientific.net/MSF.461-464.765 ↗
11. Pint BA: Proc. Int. Gas Turbine and Aeroengine Cong. and Exhibition, Reno-Tahoe, NV, USA, June 2005, ASME, Paper GT2005-68495.
12. Pint BA, Maziasz PJ, Schauer J, Levin V: Proc. Corrosion 2008 Conf., New Orleans, LA, USA, March 2008, NACE, Paper 08-443.
13. Pint BA, Unocic KA, Dryepondt S: Proc. 7th Int. Symp. on ‘Superalloy 718 and derivatives’, Warrendale, PA, USA, October 2010, TMS, 861–875.10.7449/2010/Superalloys_2010_861_875 ↗
14. Deodeshmukh VP, Meck NS: in Proc. Corrosion 2011 Conf., Houston, TX, USA, March 2011, NACE, Paper 11-195.
15. 10.1023/A:101887420673310.1023/A:1018874206733 ↗
16. Xie XS, Zhao SQ, Dong JX, Smith GD, Baker BA, Patel SL:in ‘Advances in materials technology for fossil power plants’(, Viswanathan R, et al.), 220–230; 2008, Materials Park, OH, ASM International.10.31399/asm.cp.am-epri-2007p0220 ↗
17. Pike LM:in ‘Superalloys 2008’(, Reed R C, et al.), 191–200; 2008, Warrendale, PA, TMS.10.7449/2008/Superalloys_2008_191_200 ↗
18. Maziasz PJ, Evans ND, Jablonski PD: in Proc. 6th In. Conf. on ‘Advances in materials technology for fossil power plants’, (ed. D. Gandyet al.), 900-915; 2011, Materials Park, OH, ASM International.10.31399/asm.cp.am-epri-2010p0900 ↗
19. 10.1007/s11663-009-9227-110.1007/s11663-009-9227-1 ↗
20. 10.1023/A:101606452452110.1023/A:1016064524521 ↗
21. 10.1007/BF0104672410.1007/BF01046724 ↗
22. 10.1080/0141861820823694210.1080/01418618208236942 ↗
23. Dryepondt S, Pint BA: ORNL, unpublished research, 2011.
24. Dryepondt S · 2012
25. Ennis PJ, Quadakkers WJ:in ‘High temperature alloys, their exploitable potential’(, Marriott J B, et al.), 465–474; 1985, London, Elsevier.
26. Tamura K, Sato T, Fukuda Y, Mitsuhata K, Yamanouchi H:in ‘Heat resistant materials II’(, Natesan K, et al.), 33–39; 1995, Materials Park, OH, ASM International.
27. 10.4028/www.scientific.net/MSF.369-372.35310.4028/www.scientific.net/MSF.369-372.353 ↗
28. 10.1016/j.msea.2007.05.03510.1016/j.msea.2007.05.035 ↗
29. 10.1016/j.corsci.2008.03.00110.1016/j.corsci.2008.03.001 ↗
30. 10.1149/1.277960510.1149/1.2779605 ↗
31. 10.1007/BF0322272510.1007/BF03222725 ↗
32. 10.1007/BF0104672910.1007/BF01046729 ↗
33. 10.1007/s11085-008-9094-110.1007/s11085-008-9094-1 ↗
34. 10.4028/www.scientific.net/MSF.79-82.69110.4028/www.scientific.net/MSF.79-82.691 ↗
35. 10.1116/1.57372810.1116/1.573728 ↗
36. 10.1007/s11661-999-0128-310.1007/s11661-999-0128-3 ↗
37. 10.1007/s11837-009-0104-910.1007/s11837-009-0104-9 ↗
38. 10.1007/BF0104681810.1007/BF01046818 ↗
39. 10.1007/s10853-008-2795-710.1007/s10853-008-2795-7 ↗