Creep deformation in a modified 9Cr-1 Mo steel
Source abstract
Abstract
The short term creep properties and microstructural changes associated with creep were studied for constant stress specimens of a modified 9Cr-1Mo steel tested at 923, 873, and 823 K. The variation in the minimum creep rate with stress could be well described by the Norton equation (∊ = A σ n exp(- Q/RT )) and many of the variations of this equation described in the literature. The values for the activation energy and stress exponent were comparable to values reported previously. The Monkman-Grant equation was found to describe well the relationship between the minimum creep rate and the time to rupture. The microstructural changes have been considered in terms of precipitates previously identified in these steels. A coarse structure (size ≤200 nm), comprising M 23 C 6 , M 2 X and a Nb rich MX type precipitate, was observed using SEM. A finer scale structure (size < 200 nm) was observed, using TEM, to be predominantly comprised of M 23 C 6 , M 2 X and a V rich MX type precipitate, with smaller amounts of M 6 X, V 4 C 3 , etc. After creep the coarse M 23 C 6 and M 2 X precipitates were found to coarsen and the fine V rich MX type precipitates were found to increase in number. It is considered that precipitation of the V rich MX precipitates compensates for the coarsening of the M 23 C 6 and M 2 X, thus offsetting the reduction in creep strength that would have been produced by the coarsening.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. SIKKA V. K. WARD C. T. and THOMAS K. C.: Proc. Conf. OR Terrific steels for high temperature applications’ 65— 84; 1983 Metals Park OH American Society for Metals.
2. BERGER C. SCARLIN R. B. MAYER K. H. THORNTON D. V. and BEECH S. M.: in ‘Materials for advanced power applications’ (ed. Coustouradis D. et al) Part 1 47-72; 1994 Dordrecht Boston New York Kluwer Academic.10.1007/978-94-011-1048-8_4 ↗
3. Nippon Steel Corp.: Data Package for NF616 Ferritic Steel January 1993 (2nd edn March 1994).
4. ORR J. and BURTON D.: Proc. Conf. ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 2.1.
5. ORR J. (ed.): Proceedings of ECSC Information Day on ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992.
6. KUCHAROVA K. NEMEC J. and DLOUHY A.: Proc. Conf. OR ‘Creep and fracture of engineering materials and structures’ 79— 88; 1996 Warrendale PA TMS.
7. CADEK J., , SUSTEK V., and PAHUTOVA M.: Mater. Sci. Eng. A, 1997, A225, 22 — 28.
8. ORLOVA A., , BURSIK J., , KUCHAROVA K., and SKLENICKA V.: Mater. Sci. Eng. A, 1998, A245, 39–48.
9. 10.1179/02670839910150542810.1179/026708399101505428 ↗
10. KIMURA K., , KASHIM H., and ABE F., : Key Eng. Mater., 2000, 171-174, 483–490.
11. DIGIANFRANCESCO A., , MATERA S., and TASSA O.: Rev. Metal, 2001, 98, 117 — 123.
12. FOLDYNA V. PURMENSKY J. and KUBON Z.: ISIJ Int. 2001 41 S81— S85.10.2355/isijinternational.41.Suppl_S81 ↗
13. 10.1080/09603409.1998.1168959510.1080/09603409.1998.11689595 ↗
14. MASUYAMA F., , MATSUI M., and KOMAI N., : Key Eng. Mater., 2000, 171-174, 99 — 108.
15. HOLDSWORTH S.: Int. J. Pressure Vessels Piping, 2001, 78, 773 — 778.
16. SHIBLI I. A. and N. LE MAT HANATA: Int. J. Pressure Vessels Piping 2001 78 785 — 793.10.1016/S0308-0161(01)00091-6 ↗
17. 10.1016/S0308-0161(01)00096-510.1016/S0308-0161(01)00096-5 ↗
18. 10.1016/S0308-0161(01)00097-710.1016/S0308-0161(01)00097-7 ↗
19. RASCHE C. BENDICK W. and ORR J.: Proc. Conf. on ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 2.2.
20. ORR J. BURTON D. and RASCHE C.: Proc. Conf. on ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 2.3.
21. GIANFRANCESCO A. DI RASCHE C. and ORR J.: Proc. Conf. on ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 2.5.
22. WORTEL J. C. VAN ETIENNE C. F. and ARAV F.: Proc. Conf. OR ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 4.2.
23. FOLDYNA V. JACOBOVA A. GEMPERLE A. and RIMAN R.: Proc. Conf. on ‘Creep and fracture of engineering materials and structures’ 507 — 516; 1990 Swansea Institute of Materials.
24. FOLDYNA V. JACOBOVA A. and KUPKA V.: Proc. Conf. OR ‘Creep and fracture of engineering materials and structures’ 573 — 582; 1993 Swansea Institute of Materials.
25. SPIGARELLI S. E. CERRI and E. EVANGELISTA; Proc. Conf. OR ‘Creep and fatigue—design and life assessment at high temperature’ 1— 10; 1996 London Institute of Mechanical Engineers.
26. EBERLE N. and JONES F. L.: Mater. Sci. Technol. 2003 214 — 218.10.1179/026708303225009427 ↗
27. JONES F. L.: Mater. Sci. Technol., 2003, 19, 202 — 206.
28. EBERLE N., and JONES F. L.: Mater. Sci. Technol., 2003, 19, (3), to be published.
29. EVANS R. W. and WILSHIRE B.: ‘Creep of metals and alloys’ 1985 London The Institute of Materials.
30. SKLENICA V. KUCHAROVA K. DLOUHY A. and KREJCI J.: Proc. Conf. on ‘Materials for advanced power engineering’ Liege Belgium 1994 435–444.10.1007/978-94-011-1048-8_35 ↗
31. HAM W. M. and GREENWELL B. S.: Proc. Conf. ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 4.1.
32. 10.1179/mst.1997.13.3.23310.1179/mst.1997.13.3.233 ↗
33. FOLDYNA V. JACOBOVA A. VODAREK V. and KUBON Z.: Conf. Proc. on ‘Materials for advanced power engineering’ Liege Belgium 1994 (ed. Coutsouradis D. et al) 453–464; 1994 Dordrecht Kluwer.10.1007/978-94-011-1048-8_37 ↗
34. ANDREN H. O. CAI G. and SVENSSON L.-E.: AppL Surf Sci. 1995 87 (8) 200 — 206.10.1016/0169-4332(94)00491-9 ↗
35. ROBSON J. D., and BHADESHIA H. K. D. H.: Ca/phag 1996, 20, 447 — 460.
36. ENNIS P. J.: in ‘Advances in turbine materials design and manufacturing’ Proc. 4th Int. Charles Parsons Turbine Conf. (ed. Strang A. et al) 296-308; 1997 London The Institute of Materials.
37. FOLDYNA V. PURMENSKY J. and KUBON z. Proc. Conf. OR ‘Creep and fracture of engineering materials and structures’ 587 — 597; 1997 Warrendale PA The Minerals Metals and Materials Society.
38. ORR J. and BURTON D.: Proc. Conf. ‘The manufacture and properties of steel 91 for the power plant and process industries’ Dusseldorf November 1992 ECSC Paper 5.2.