journal article·2018-09Open access

Designing steel to resist hydrogen embrittlement: Part 1 – trapping capacity

T. I. Ramjaun, S. W. Ooi, R. Morana, H. K. D. H. Bhadeshia

Materials Science and Technology· Volume 34· Issue 14

Abstract

A novel steel has been designed for use in the oil and gas industry, displaying properties comparable with the currently available F22 grade and possessing the additional quality of excellent hydrogen trapping capacity. Its high strength is derived from a martensitic microstructure containing a dispersion of fine vanadium-molybdenum carbides that evolve during thermal treatments. If the tempering cycle is controlled such that the precipitates maintain a degree of coherency with the matrix, then they act as hydrogen trapping sites, due to the associated strain fields, thus mitigating the problem of diffusible hydrogen. Using material modelling programmes and small-scale sample alloys this work describes the process of the new steel design and demonstrates its superior trapping capacity through thermal desorption analysis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Cambridge, Cambridge, UK

BP Exploration, Sunbury-on-Thames, UK

Funding

BP International Centre for Advanced Materials

References (27)

Show source-provided references
1. 10.1098/rspl.1874.002410.1098/rspl.1874.0024 ↗
2. 10.1016/0360-3199(84)90043-010.1016/0360-3199(84)90043-0 ↗
3. 10.5006/1.358205310.5006/1.3582053 ↗
4. 10.1016/B978-0-12-341825-8.50014-310.1016/B978-0-12-341825-8.50014-3 ↗
5. 10.1007/BF0109269310.1007/BF01092693 ↗
6. 10.1007/BF0302748610.1007/BF03027486 ↗
7. 10.5006/1.329032010.5006/1.3290320 ↗
8. 10.1149/1.209742910.1149/1.2097429 ↗
9. 10.1016/j.msea.2016.08.05310.1016/j.msea.2016.08.053 ↗
10. 10.1007/s12540-016-5631-710.1007/s12540-016-5631-7 ↗
11. 10.1016/j.ijhydene.2017.12.10910.1016/j.ijhydene.2017.12.109 ↗
12. 10.1016/j.matlet.2017.11.02910.1016/j.matlet.2017.11.029 ↗
13. 10.2355/isijinternational.ISIJINT-2015-43010.2355/isijinternational.ISIJINT-2015-430 ↗
14. Honeycombe RWK · 1995
15. 10.1098/rspa.2006.168810.1098/rspa.2006.1688 ↗
16. 10.2355/isijinternational.43.52710.2355/isijinternational.43.527 ↗
17. Kosaka M · CAMP-ISIJ · 2004 · 17 · 1371
18. 10.1007/BF0281484610.1007/BF02814846 ↗
19. Uno N, Kubota M, Nagata M, et al. Super-high-strength bolt, SHTB. (Technical Report 97). Nippon Steel Corporation Technical Report, January 2008.
20. Bhadeshia HKDH · Mathematical modelling of weld phenomena · 1993 · 1 · 109
21. ASTM A182/A182M. Standard specification for forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service, 2011.
22. Hassel TA. Effects of heat treatment on microstructure, strength and hardness of F22 steel [master's thesis]. Norwegian University of Science and Technology; 2013.
23. Honeycombe RWK. · 1974
24. 10.1179/03063458279042721710.1179/030634582790427217 ↗
25. Murugananth M · Mathematical modelling of weld phenomena · 2002 · 6 · 205
26. Kozeschnik E · 2013
27. 10.1007/s11665-008-9225-510.1007/s11665-008-9225-5 ↗