journal article·2014-12

Bearing steel microstructures after aircraft gas turbine engine service

J. R. Nygaard, M. Rawson, P. Danson, H. K. D. H. Bhadeshia

Materials Science and Technology· Volume 30· Issue 15
Publisher page

Abstract

The microstructure of aircraft gas turbine engine bearing steel has been characterised after service in Rolls-Royce Trent™ engines, with the focus on surface condition and the consequences of sliding contact. Carbide populations at the surfaces of rolling elements are found depleted by 30% after 30 000 h engine service. A single ball failure occurred after this period, leading to fatigue spalling that initiated below the contact surface. Comparisons between unused bearing raceways and those that have experienced service revealed that the microstructures resulting from secondary hardening remain remarkably stable. Plastic flow along the direction of rolling is confined to a shallow zone <2 μm beneath the contact surfaces. Transmission electron microscopy has revealed a new deformation mechanism in these bearing steels, in the form of mechanical twinning at interfaces and prior austenite grain boundaries. It is demonstrated that workhardening occurs to a depth of 1 mm in the raceway that has experienced 30000 h service.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge, Cambridgeshire CB3 0FS, UK

Rolls-Royce plc, PO Box 31, Derby, DE24 8BJ, UK

References (51)

Show source-provided references
1. 10.1520/STP49128S10.1520/STP49128S ↗
2. Bohmer HJ, Hirsch T and Streit E: ‘Rolling contact fatigue behaviour of heat resistant bearing steels at high operational temperatures’, ASTM STP 1327, 131–151, ASTM, West Conshohocken, PA, USA, 1998.10.1520/STP12125S ↗
3. 10.1080/1040200920898217810.1080/10402009208982178 ↗
4. 10.4271/93247010.4271/932470 ↗
5. 10.1007/BF0265659210.1007/BF02656592 ↗
6. 10.1080/1040200090322631710.1080/10402000903226317 ↗
7. 10.1080/1040200910898203210.1080/10402009108982032 ↗
8. Bohmer HJ: ‘Residual stresses and material behaviour of M50NiL and RBD’, ASTM STP 1195, 34–48, ASTM, West Conshohocken, PA, USA, 1993.10.1520/STP24822S ↗
9. ‘Specification for high-carbon anti-friction bearing steel’, ASTM Standard A295-98, ASTM International, West Conshohocken, PA, USA, 1998.
10. 10.1080/1040200090322632510.1080/10402000903226325 ↗
11. 10.1080/10402004.2013.81839310.1080/10402004.2013.818393 ↗
12. 10.1007/BF0267033010.1007/BF02670330 ↗
13. Bamberger EN and Kroeger DJ: ‘Rolling element fatigue life of a carburized modified M50 bearing steel’, Final technical report, NASA, Lewis Research Centre, Cleveland, OH, USA, 1984.
14. Hirakawa K · NSK Motion Control · 1999 · 7 · 15
15. Reti T: ‘Residual stresses in carburized, carbonitrided, and case-hardened components’; 2002, Materials Park, OH, ASM International.
16. Zaretsky EV: ‘Bearing and gear steels for aerospace applications. Technical memorandum’, NASA, Lewis Research Centre, Cleveland, OH, USA, 1990.
17. Bamberger EN, Averbach BL, Pearson PK, Vanpeit S and Price MJ: ‘Improved fatigue life bearing development’, Final report AD-B137 279, Air Force Wright Aeronautical Laboratories, Wright-Patterson Air Force Base, OH, USA, 1989.
18. 10.1179/1743284711Y.000000004310.1179/1743284711Y.0000000043 ↗
19. 10.1016/j.pmatsci.2011.06.00210.1016/j.pmatsci.2011.06.002 ↗
20. 10.1115/1.320913210.1115/1.3209132 ↗
21. 10.1115/1.326107810.1115/1.3261078 ↗
22. 10.1179/026708311X1313595069925410.1179/026708311X13135950699254 ↗
23. 10.1016/j.ijfatigue.2009.07.00210.1016/j.ijfatigue.2009.07.002 ↗
24. 10.1080/1040200970898370610.1080/10402009708983706 ↗
25. 10.1116/1.131703210.1116/1.1317032 ↗
26. 10.1080/1040200950898347910.1080/10402009508983479 ↗
27. 10.1016/S1350-6307(99)00009-610.1016/S1350-6307(99)00009-6 ↗
28. 10.1016/S1350-6307(98)00024-710.1016/S1350-6307(98)00024-7 ↗
29. 10.1017/CBO978113917173110.1017/CBO9781139171731 ↗
30. 10.5772/2079010.5772/20790 ↗
31. 10.1080/1040200010898248210.1080/10402000108982482 ↗
32. 10.1115/1.283440710.1115/1.2834407 ↗
33. Nahm AH · Trans. ASME · 1982 · 104 · 330
34. 10.1016/j.wear.2011.01.09410.1016/j.wear.2011.01.094 ↗
35. 10.1080/1040200090331236410.1080/10402000903312364 ↗
36. 10.1016/j.ijmachtools.2003.10.01810.1016/j.ijmachtools.2003.10.018 ↗
37. 10.1016/j.wear.2010.02.01510.1016/j.wear.2010.02.015 ↗
38. 10.1016/S0043-1648(96)07225-010.1016/S0043-1648(96)07225-0 ↗
39. 10.1243/13506501JET78510.1243/13506501JET785 ↗
40. 10.1038/nmeth.208910.1038/nmeth.2089 ↗
41. Dodd A, Mitamura N, Kawamura H and Ohura Y: ‘Bearings for aircraft gas turbine engines (part 2)’. NSK Motion and Control, no. 6, 1–8, 1999.
42. Zaretsky EV: ‘Rolling element fatigue life of ausformed M50 balls’. Technical note, NASA, Washington, DC, USA, 1968.
43. Anderson WJ · Tribol. Trans. · 1959 · 2 · 108
44. Carter TL: ‘A study of some factors affecting rolling-contact fatigue life’, NASA Technical Report, R-60, 1–48, 1960.
45. 10.1007/BF0291755210.1007/BF02917552 ↗
46. 10.1520/STP26230S10.1520/STP26230S ↗
47. 10.1016/0026-0800(87)90067-X10.1016/0026-0800(87)90067-X ↗
48. 10.1007/BF0265471410.1007/BF02654714 ↗
49. 10.1016/j.matchar.2007.07.00510.1016/j.matchar.2007.07.005 ↗
50. 10.1016/0001-6160(62)90040-810.1016/0001-6160(62)90040-8 ↗
51. 10.1179/1743284711Y.000000006010.1179/1743284711Y.0000000060 ↗